SavedAdd your journal

Journals / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2022 / Cilt: 15 - Sayı: 1

Large-area synthesis of vertically aligned carbon nanotubes growth on the aluminum foil via FCCVD method

FCCVD yöntemi ile alüminyum folyo üzerinde dikey olarak hizalanmış karbon nanotüp büyümesinin geniş alan sentezi

Yaşar Özkan YEŞİLBAĞ
Fatma Nur TUZLUCA
Ahmad HÜSEYİN
Ahmed Jalal SALIH
Eda Nur DEMİREZ
Pages
296–303
Publication Date
2022-03-27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These VA-CNTs, synthesized by the FCCVD method on an Al foil in a large area, have the potential applications to be used especially in energy storage, optoelectronic, and sensor.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, VA-CNTs were synthesized homogeneously on Al foil at 610 oC temperature by Floating Catalyst Chemical Vapor Deposition (FCCVD) method in a horizontal tube furnace.
📊
Key Findings & Data:VA-CNTs with diameters in the range of ~10-15 nm and lengths in the range of ~30-35 µm were obtained.
💡
Conclusion & Impact:These VA-CNTs, synthesized by the FCCVD method on an Al foil in a large area, have the potential applications to be used especially in energy storage, optoelectronic, and sensor.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:VA-CNTs · FCCVD · aluminum foil

Abstract

In this study, VA-CNTs were synthesized homogeneously on Al foil at 610 oC temperature by Floating Catalyst Chemical Vapor Deposition (FCCVD) method in a horizontal tube furnace. While ethanol was used as the carbon source, ferrocene was used as the catalyst. VA-CNTs with diameters in the range of ~10-15 nm and lengths in the range of ~30-35 µm were obtained. Structural and morphological analyzes of VA-CNTs were determined using X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersion X-Ray Spectroscopy (EDS), Raman Spectroscopy and X-Ray Photoelectron Spectroscopy (XPS). These VA-CNTs, synthesized by the FCCVD method on an Al foil in a large area, have the potential applications to be used especially in energy storage, optoelectronic, and sensor.

Özet

Bu çalışmada, yatay bir tüp fırında FCCVD yöntemiyle 610 oC sıcaklıkta Al folyo üzerine VA-CNT’ler homojen bir şekilde sentezlenmiştir. Karbon kaynağı olarak etanol kullanılırken katalizör olarak da ferrosen kullanılmıştır. Çapları ~10-15 nm aralığında, uzunlukları ise ~30-35 µm aralığında değişen VA-CNT'ler elde edilmiştir. VA-CNT'lerin yapısal ve morfolojik analizleri, X-Işını Kırınım (XRD), Alan Emisyon Taramalı Elektron Mikroskobu (FESEM), Enerji Dağılım X-Işını Spektroskopisi (EDS), Raman Spektroskopisi ve X-Işını Fotoelektron Spektroskopisi (XPS) kullanılarak belirlenmiştir. Geniş bir alanda Al folyo üzerinde FCCVD yöntemiyle sentezlenen bu VA-CNT'ler, özellikle enerji depolama, optoelektronik ve sensör uygulamalarında kullanılabilme potansiyeline sahiptir.

🔖

Cite This Article

YEŞİLBAĞ, Y. Ö., TUZLUCA, F. N., HÜSEYİN, A., SALIH, A. J., DEMİREZ, E. N. (2022). Large-area synthesis of vertically aligned carbon nanotubes growth on the aluminum foil via FCCVD method. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 15 - Sayı: 1, 296–303. https://ajindex.com/articles/395434

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Bondavalli, P., Legagneux, P., & Pribat, D. (2009). Carbon nanotubes based transistors as gas sensors: State of the art and critical review. Sensors and Actuators B: Chemical, 140(1), 304-318.
  2. Chachuli, S. A. M., Hamidon, M. N., Ertugrul, M., Mamat, M. S., Coban, O., Tuzluca, F. N.,. & Shamsudin, N. H. (2021). Effects of MWCNTs/Graphene Nanoflakes/MXene addition to TiO2 thick film on hydrogen gas sensing. Journal of Alloys and Compounds, 160671. Chen, D. R., Chitranshi, M., Schulz, M., & Shanov, V. (2019). A Review of Three Major Factors Controlling Carbon Nanotubes Synthesis from the Floating Catalyst Chemical Vapor Deposition. Nano Life, 9(04), 1930002. Chen, Y., Zhang, Y., Hu, Y., Kang, L., Zhang, S., Xie, H.,. & Zhang, J. (2014). State of the art of single‐walled carbon nanotube synthesis on surfaces. Advanced Materials, 26(34), 5898-5922.
  3. Ionescu, M. I., Zhang, Y., Li, R., Sun, X., Abou-Rachid, H., & Lussier, L. S. (2011). Hydrogen-free spray pyrolysis chemical vapor deposition method for the carbon nanotube growth: parametric studies. Applied surface science, 257(15), 6843-6849.
  4. Jerng, S. K., Yu, D. S., Lee, J. H., Kim, C., Yoon, S., & Chun, S. H. (2011). Graphitic carbon growth on crystalline and amorphous oxide substrates using molecular beam epitaxy. Nanoscale research letters, 6(1), 1-6.
  5. Jo, S. H., Tu, Y., Huang, Z. P., Carnahan, D. L., Wang, D. Z., & Ren, Z. F. (2003). Effect of length and spacing of vertically aligned carbon nanotubes on field emission properties. Applied Physics Letters, 82(20), 3520-3522.
  6. Kinoshita, T., Karita, M., Nakano, T., & Inoue, Y. (2019). Two step floating catalyst chemical vapor deposition including in situ fabrication of catalyst nanoparticles and carbon nanotube forest growth with low impurity level. Carbon, 144, 152-160.
  7. Manawi, Y. M., Samara, A., Al-Ansari, T., & Atieh, M. A. (2018). A review of carbon nanomaterials’ synthesis via the chemical vapor deposition (CVD) method. Materials, 11(5), 822. Nassoy, F., Pinault, M., Descarpentries, J., Vignal, T., Banet, P., Coulon, P. E.,. & Mayne-L’Hermite, M. (2019). Single-step synthesis of vertically aligned carbon nanotube forest on aluminium foils. Nanomaterials, 9(11), 1590. Rafique, I., Kausar, A., Anwar, Z., & Muhammad, B. (2016). Exploration of epoxy resins, hardening systems, and epoxy/carbon nanotube composite designed for high performance materials: A review. Polymer-Plastics Technology and Engineering, 55(3), 312-333.
  8. Raji, A. R. O., Villegas Salvatie