Distal radius measurements and efficacy of fixed-angle locking volar plates

Objective & Hypothesis:For surgical treatment of unstable distal radius fractures, fixed-angled locking volar plate fixation is becoming popular nowadays because of some advantages over other surgical techniques.

📊

Key Findings & Data:Materials and methods: First, we took conventional radiography images of 18 dried radii and later we measured the palmar subchondral angle, dorsal subchondral angle, mid-subchondral angle, and palmar cortical angle using lateral radiography.

💡

Conclusion & Impact:Therefore, the term “anatomic distal radius volar plate” should be discussed.

🔬Design:Research Article

📍Scope:Comprehensive Sample

⚙️Variables:Key words: Volar plate · distal radius · screw penetration

Abstract

For surgical treatment of unstable distal radius fractures, fixed-angled locking volar plate fixation is becoming popular nowadays because of some advantages over other surgical techniques. In this article, we discuss the fitting of fixed-angle locking volar plates to the distal radius in relation to the changes in the distal radial angles. Materials and methods: First, we took conventional radiography images of 18 dried radii and later we measured the palmar subchondral angle, dorsal subchondral angle, mid-subchondral angle, and palmar cortical angle using lateral radiography. Results: According to the measurements, the volar subchondral angles (alpha) ranged from 10.2° to 28.1°, the middle subchondral angles ranged from 55.9° to 93.2°, the dorsal subchondral angles ranged from 77° to 109.6°, and the volar cortical angles ranged from 134.5° to 158.4°. Conclusion: Although fixed-angle locking volar plates are accepted as anatomical, our measurements showed that volar cortical angles and the subchondral angles are variable. Therefore, the term “anatomic distal radius volar plate” should be discussed.

Özet

For surgical treatment of unstable distal radius fractures, fixed-angled locking volar plate fixation is becoming popular nowadays because of some advantages over other surgical techniques. In this article, we discuss the fitting of fixed-angle locking volar plates to the distal radius in relation to the changes in the distal radial angles. Materials and methods: First, we took conventional radiography images of 18 dried radii and later we measured the palmar subchondral angle, dorsal subchondral angle, mid-subchondral angle, and palmar cortical angle using lateral radiography. Results: According to the measurements, the volar subchondral angles (alpha) ranged from 10.2° to 28.1°, the middle subchondral angles ranged from 55.9° to 93.2°, the dorsal subchondral angles ranged from 77° to 109.6°, and the volar cortical angles ranged from 134.5° to 158.4°. Conclusion: Although fixed-angle locking volar plates are accepted as anatomical, our measurements showed that volar cortical angles and the subchondral angles are variable. Therefore, the term “anatomic distal radius volar plate” should be discussed.

Keywords

Key words: Volar plate distal radius screw penetration

🔖

Cite This Article

AĞIR, İ., AYTEKİN, M. N., KÜÇÜKDURMAZ, F., BAŞCI, O., TETİK, C. (2014). Distal radius measurements and efficacy of fixed-angle locking volar plates. Turkish Journal of Medical Sciences, Cilt: 44 - Sayı: 1, 36–41. https://ajindex.com/articles/394085

📄 Full Text PDF Viewer

Open in New Tab ↗

↗New Tab

📄

PDF görüntüleyici hazırlanıyor...

References (12)

Prithishkumar IJ, Francis DV, Nithyanand M, Verghese VD, Samuel P. Morphometry of the distal radius: an osteometric study in the Indian population. Indian J Basic Appl Med Res 2012, 1: 166–171. 9. Freeland AE, Luber KT. Biomechanics and biology of plate fixation of distal radius fractures. Hand Clin 2005; 21: 329–339.
Muller M, Allgower M, Schneider R, Willenegger H. Manual of Internal Fixation. 3rd ed. New York, NY, USA: Springer Verlag; 1991. pp. 1–3.
Smith DW, Henry MH. The 45 degrees pronated oblique view for volar fixed-angle plating of distal radius fractures. J Hand Surg Am 2004; 29: 703–706. Orbay JL. The treatment of unstable distal radius fractures with volar fixation. Hand Surg 2000; 5: 103–112.
Orbay JL, Badia A, Indriago IR, Infante A, Khouri RK, Gonzalez E et al. The extended flexor carpi radialis approach: a new perspective for the distal radius fracture. Tech Hand Up Extrem Surg 2001; 5: 204–211.
Windisch G, Clement H, Tanzer K, Feigl G, Grechenig W, Anderhuber F et al. Promontory of radius: a new anatomical description on the distal radius. Surg Radiol Anat 2007; 29: 629–633.
Orbay JL, Fernandez DL. Volar fixation for dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg Am 2002; 27: 205–215.
Jupiter JB, Fernandez DL, Toh CL, Fellman T, Ring D. Operative treatment of volar intra-articular fractures of the distal end of the radius. J Bone Joint Surg Am 1996; 78: 1817–1828.
Downing ND, Karantana A. A revolution in the management of fractures of the distal radius? J Bone Joint Surg Br 2008; 90: 1271–1275.
Cantu RV, Koval KJ. The use of locking plates in fracture care. J Am Acad Orthop Surg 2006; 14: 183–190.
Maschke SD, Evans PJ, Schub D, Drake R, Lawton JN. Radiographic evaluation of dorsal screw penetration after volar fixed-angle plating of the distal radius: a cadaveric study. J Hand Surg Am 2008; 33: 1144–1152.
Buzzell JE, Weikert DR, Watson JT, Lee DH. Precontoured fixed-angle volar distal radius plates: a comparison of anatomic fit. J Hand Surg Am 2009; 34: 365–366. Jupiter JB. Fractures of the distal end of the radius. J Bone Joint Surg Am 1991; 73: 461–469.
Osada D, Kamei S, Masuzaki K, Takai M, Kameda M, Tamai K. Prospective study of distal radius fractures treated with a volar locking plate system. J Hand Surg Am 2008; 33: 691–700. Douthit JD. Volar plating of dorsally comminuted fractures of the distal radius: a 6-year study. Am J Orthop 2005; 34: 140– 147. Perren SM. Evolution of the internal fixati