Journals / Turkish Journal of Agriculture and Forestry / 1998 / Cilt: 23 - Sayı: EK3

The Cleavage Strength of Calabrian Pine (Pinus brutia Ten.) Woods Growing Naturally in Different Ecological Regions of Turkey

Pages
549–556
Publication Date
1998-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of measurements, the avarage values of cleavage strength, ovendry specific gravity and late wood ratio has been determined as 5.4 kg/cm2, 0.511 g/cm3 and 23.09 %.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the test trees were taken from natural growth sites that calabrian pine grows optimally had been used as research material.
📊
Key Findings & Data:Test trees of 20 in number were collected from 5 different regions (Suçatı - Kahramanmaraş, Edremit - Balıkesir, Kemalpaşa - İzmir, Yılanlı- Muğla, Melli (Bucak) - Burdur).
💡
Conclusion & Impact:As a result of measurements, the avarage values of cleavage strength, ovendry specific gravity and late wood ratio has been determined as 5.4 kg/cm2, 0.511 g/cm3 and 23.09 %.
🔬Design:Lab & Field Experiment
📍Scope:Comprehensive Sample
⚙️Variables:Turk. J. Agric. For. · (1999) · 549-556. Full text: pdf Other articles published in the same issue: Turk. J. Agric. For.

Abstract

In this study, the test trees were taken from natural growth sites that calabrian pine grows optimally had been used as research material. The main aim of study is to determine cleavage strengh variation to find in different growing regions. Test trees of 20 in number were collected from 5 different regions (Suçatı - Kahramanmaraş, Edremit - Balıkesir, Kemalpaşa - İzmir, Yılanlı- Muğla, Melli (Bucak) - Burdur). Test samples were prepared from stem part of trees between at a hight of 2 and 4 meters. The effect of factors growing region on the cleavage strengh of trees was tested by using the varians analysis and Duncan test. The relation between cleavage strength and ovendry specific gravity was determined by using regresion analysis. The analyses showed that the cleavage strengh was effected significantly by the growing location. As a result of measurements, the avarage values of cleavage strength, ovendry specific gravity and late wood ratio has been determined as 5.4 kg/cm2, 0.511 g/cm3 and 23.09 %.

Özet

In this study, the test trees were taken from natural growth sites that calabrian pine grows optimally had been used as research material. The main aim of study is to determine cleavage strengh variation to find in different growing regions. Test trees of 20 in number were collected from 5 different regions (Suçatı - Kahramanmaraş, Edremit - Balıkesir, Kemalpaşa - İzmir, Yılanlı- Muğla, Melli (Bucak) - Burdur). Test samples were prepared from stem part of trees between at a hight of 2 and 4 meters. The effect of factors growing region on the cleavage strengh of trees was tested by using the varians analysis and Duncan test. The relation between cleavage strength and ovendry specific gravity was determined by using regresion analysis. The analyses showed that the cleavage strengh was effected significantly by the growing location. As a result of measurements, the avarage values of cleavage strength, ovendry specific gravity and late wood ratio has been determined as 5.4 kg/cm2, 0.511 g/cm3 and 23.09 %.

🔖

Cite This Article

BEKTAŞ, İ., TUTUŞ, A. (1998). The Cleavage Strength of Calabrian Pine (Pinus brutia Ten.) Woods Growing Naturally in Different Ecological Regions of Turkey. Turkish Journal of Agriculture and Forestry, Cilt: 23 - Sayı: EK3, 549–556. https://ajindex.com/articles/392940

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...