SavedAdd your journal

Journals / Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering / 2022 / Cilt: 23 - Sayı: 1

THE INFLUENCE OF PROCESS PARAMETERS ON THE PROPERTIES OF GLASS FOAM PRODUCED FROM INDUSTRIAL WASTE GLASS USING SiC AS THE FOAMING AGENT

Abdulkadir SARI
Recep AKDENİZ
Ali Murat SOYDAN
Ömer YILDIZ
Pages
21–36
Publication Date
2022-03-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The characterization of the thermal and the mechanical properties of the samples was performed by testing their compressive strength, and thermal conductivity.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Glass foams having a low bulk density, 0.22-0.36 g.cm-3 were produced using waste glass as the raw material and SiC as the foaming agent..
📊
Key Findings & Data:The produced glass foam has very high insulation performance with a very low thermal conductivity of 0.045-0.065 W.m-1.K-1, making it suitable for thermal and acoustic applications.
💡
Conclusion & Impact:The characterization of the thermal and the mechanical properties of the samples was performed by testing their compressive strength, and thermal conductivity.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Insulation materials · Glass foam · Waste glass

Abstract

Glass foams having a low bulk density, 0.22-0.36 g.cm-3 were produced using waste glass as the raw material and SiC as the foaming agent.. The produced glass foam has very high insulation performance with a very low thermal conductivity of 0.045-0.065 W.m-1.K-1, making it suitable for thermal and acoustic applications. Despite its highly porous structure, it exhibits a very high compressive strength between 0.08-6.99 MPa and a good dimensional stability. The environmentally friendly glass foam produced in this study has a potential as a structural and insulation material in construction applications. Nano-sized foaming agents enhances the efficiency of the reaction in the manufacturing process. The properties such as volume change, weight loss, microstructure, the mineralogical structure, the sintered bulk density, and the porosity of the prepared samples were measured and analyzed. The characterization of the thermal and the mechanical properties of the samples was performed by testing their compressive strength, and thermal conductivity.

🔖

Cite This Article

SARI, A., AKDENİZ, R., SOYDAN, A. M., YILDIZ, Ö. (2022). THE INFLUENCE OF PROCESS PARAMETERS ON THE PROPERTIES OF GLASS FOAM PRODUCED FROM INDUSTRIAL WASTE GLASS USING SiC AS THE FOAMING AGENT. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 23 - Sayı: 1, 21–36. https://ajindex.com/articles/390767

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Scarinci G, BrusatinG, Bernardo E, “Glass foams”, p. 158–176, in “Cellular ceramics: structure, manufacturing, properties and applications”. Edited by M. Scheffler, P. Colombo, Wiley-VCH Verlag GmbH & Co., Weinheim, 2005
  2. Bayer G. Foaming of borosilicate glasses by chemical reactions in the temperature range 950-1150ºC, Journal of Non-Crystalline Solids, 1980; 38 & 39,855–860
  3. Bernardo E, Cedro R, Florean M, Hreglich S. Reutilization and stabilization of wastes by the production of glass foams, Ceramics International, 2007; 33, 963–968
  4. Bernardo E, Albertini F. Glass foams from dismantled cathode ray tubes, Ceramics International, 2006; 32, 603–608
  5. Fernandes HR, Tulyaganov DU, Ferreira JMF. Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents, Ceramics International, 2009; 35 229–235
  6. Arriagada C, Navarrete I, Lopez M, Understanding the effect of porosity on the mechanical and thermal performance of glass foam lightweight aggregates and the influence of production factors. Construction and Building Materials, 2019; 228, 116746
  7. Rincón A. Novel ‘inorganic gel casting’process for the manufacturing of glass foams. Journal of the European Ceramic Society, 2017; 37(5), 2227–2234
  8. Gong Y et al. Recycling of waste amber glass and porcine bone into fast sintered and high strength glass foams. Journal of Cleaner Production, 2016; 112, 4534–4539
  9. Souza MT. Glass foams produced from glass bottles and eggshell wastes. Process Safety and Environmental Protection, 2017; 111, 60–64
  10. Fernandes HR, Tulyaganov DU, Ferreira JMF. Production and characterisation of glass ceramic foams from recycled raw materials, Advances in Applied Ceramics, 2009; 108 9–13
  11. Zhang Q, He F, Shu H et al. Xie, Preparation of high strength glass ceramic foams from waste cathode ray tube and germanium tailings, Construction and Building Materials, 2016; 111, 105–110
  12. Qu Y-N, Xu J, Su Z-G, et al. Lightweight and high-strength glass foams prepared by a novel green spheres hollowing technique, Ceramics International, 2016; 42, 2370–2377
  13. Zhu M, Ji R, Li Z, et al. Preparation of glass ceramic foams for thermal insulation applications from coal fly ash and waste glass, Construction and Building Materials 112 (2016) 398–405
  14. Spiridonov YA, Orlova LA. Problems of foam glass production, Glass and Ceramics, 2003; 60 (9-10) 313–314
  15. König J, Petersen RR, Yue Y. Influence of the glass partic