Journals / Teknik Dergi / 2021 / Cilt: 32 - Sayı: 5

Comparison of Design Spectra in Turkish Earthquake Codes (TEC and TBEC) in Terms of Seismic Isolator Design

Türk Deprem Yönetmelikleri (DBYBHY ve TBDY) Spektrum Tanımlarının Deprem Yalıtım Sistemi Tasarımı Özelinde Karşılaştırılması

Pages
11127–11152
Publication Date
2021-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that analyses based on design spectra of different versions of Turkish Earthquake Code may lead to variation in maximum isolator displacements up to 50% depending on the coordinate of the structure.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, for a seismically isolated structural model designed in accordance with the design spectra defined by both Turkish Earthquake Codes 2007 and 2018, variation of maximum isolator displacement was studied.
📊
Key Findings & Data:Results showed that analyses based on design spectra of different versions of Turkish Earthquake Code may lead to variation in maximum isolator displacements up to 50% depending on the coordinate of the structure.
💡
Conclusion & Impact:It is also observed that use of deteriorating hysteretic representation for seismic isolators will result in even higher variations in maximum isolator displacements.
🔬Design:Modeling & Simulation
📍Scope:2007 Verileri
⚙️Variables:sismik izolasyon · dinamik analiz · kurşun çekirdekli kauçuk izolatör

Abstract

In this study, for a seismically isolated structural model designed in accordance with the design spectra defined by both Turkish Earthquake Codes 2007 and 2018, variation of maximum isolator displacement was studied. The isolation system in the structure was composed of lead rubber bearings. Selected and scaled ground motion records were used to perform bi-directional analyses where both horizontal components of records were subjected to analytical model, simultaneously. Analyses were repeated for both deteriorating and non-deteriorating hysteretic representations of isolators. Considered parameters were Q/W ratio of the isolator and the construction site. Results showed that analyses based on design spectra of different versions of Turkish Earthquake Code may lead to variation in maximum isolator displacements up to 50% depending on the coordinate of the structure. It is also observed that use of deteriorating hysteretic representation for seismic isolators will result in even higher variations in maximum isolator displacements.

Özet

Bu çalışmada, Türkiye Bina Deprem Yönetmeliği ve Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik koşulları dikkate alınarak tasarlanmış deprem yalıtımlı bir yapı modeli için, spektrum tanımındaki değişime bağlı olarak maksimum yalıtım birimi deplasmanının nasıl etkilendiği incelenmiştir. Yapıdaki deprem yalıtım sitemi kurşun çekirdekli kauçuk yalıtım birimlerinden oluşurken, seçilen ve ölçeklenen deprem kayıtlarına ait yatay bileşenlerin eş zamanlı etkisine maruz bırakılmıştır. Analizler, çevrimsel yükleme altında yalıtım birimindeki dayanım kaybını dikkate alan ve almayan durumlar için tekrarlanmıştır. Yalıtım birimi dayanımını temsilen Q/W oranı ve yapının inşa edileceği alan seçilen parametrelerdir. Sonuç olarak, her iki deprem yönetmeliğinin tanımladığı spektrum eğrilerine göre tasarlanan yalıtım birimlerinin maksimum deplasmanlarında yapı koordinatına bağlı olarak farklılaşma %50 mertebelerine varabilmektedir. Yalıtım birimindeki dayanım kaybının dikkate alındığı durumlar için bu farklılaşmanın daha da fazla olduğu kaydedilmiştir.

🔖

Cite This Article

ERDOĞDU, H., ÇAVDAR, E., ÖZDEMİR, G. (2021). Comparison of Design Spectra in Turkish Earthquake Codes (TEC and TBEC) in Terms of Seismic Isolator Design. Teknik Dergi, Cilt: 32 - Sayı: 5, 11127–11152. https://ajindex.com/articles/386409

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Pınarbaşı, S., Akyüz, U., Sismik İzolasyon ve Elastomerik Yastık Deneyleri, Teknik Dergi, 16(78), 3581-3598, 2005
  2. Türkiye Bina Deprem Yönetmeliği, İçişleri Bakanlığı Afet ve Acil Durum Yönetimi Başkanlığı, Ankara, 2018
  3. American Society of Civil Engineers, Minimum Design Loads and Associated Criteria for Buildings and Other Structures: ASCE7-16, Reston, Virginia, 2017
  4. Eurocode8: Design of Structures for Earthquake Resistance- Part 1: General Rules, Seismic Actions and Rules for Buildings, EN 1998-1, 2004
  5. American Association of State Highway and Transportation Officials, Guide Specification for Seismic Isolation Design 4th Edition, Washington, DC, 2014
  6. Patil, A. S., Kumbhar, P. D., Time History Analysis of Multistoried RCC Buildings for Different Seismic Intensities, International Journal of Structural and Civil Engineering Research, 2(3), 194-201, 2013
  7. Pant, D. R., Constantinou, M. C., Wijeyewickrema, A. C., Re-evaluation of Equivalent Lateral Force Procedure for Prediction of Displacement Demand in Seismically Isolated Structures, Engineering Structures, 52, 455-465, 2013
  8. Fadi, F., Constantinou, M. C., Evaluation of Simplified Methods of Analysis for Structures with Triple Friction Pendulum Isolators, Earthquake Engineering and Structural Dynamics, 39, 5-22, 2010
  9. Özdemir, G., Constantinou, M. C., Evaluation of Equivalent Lateral Force Procedure in Estimating Seismic Isolator Displacements, Soil Dynamics and Earthquake Engineering, 30, 1036-1042, 2010
  10. Özdemir, G., Avşar, Ö., Bayhan, B., Change in Response of Bridges Isolated with LRBs due to Lead Core Heating, Soil Dynamics and Earthquake Engineering, 31, 921-929, 2011
  11. Özdemir, G., Dicleli, M., Effect of Lead Core Heating on the Seismic Performance of Bridges Isolated with LRB in Near-fault Zones, Earthquake Engineering and Structural Dynamics, 41, 1989-2007, 2012
  12. Shao, B., Mahin, S. A., Zayas, V., Achieving Targeted Levels of Reliability for Low-rise Seismically Isolated Structures, Soil Dynamics and Earthquake Engineering, 125, 105744, 2019
  13. Pant, D. R., Maharjan, M., On Selection and Scaling Ground Motions for Analysis of Seismically Isolated Strucutres, Earthquake Engineering and Engineering Vibration, 15, 633-648, 2016
  14. Cancellara, D., Angelis, F. D., Dynamic Assessment of Base Isolation Systems for Irregular in Plan Structures: Response Spectrum Analysis vs Nonlinear Analysis, Composite Structures, 215, 98-115, 2019
  15. Mavroni