Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 17 - Sayı: 3

Modification of Asphalt Binder with Waste Expanded Polystyrene (EPS) Foam

Pages
245–252
Publication Date
2021-09-27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Besides, it was found by statistical analyses that 2% of the increase in the additive ratio is not sufficient to make a significant difference in the physical properties of bitumen, therefore, the increase should be at least 4%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Waste polymers are widely used in asphalt modification, especially, in order to reduce their detrimental effect on the environment.
📊
Key Findings & Data:In this respect, the EPS foam, which produces waste in both production and use stages, was mixed with bitumen by weight at the ratios of 2%, 4%, 6%, and 8%, and dry modification method was employed.
💡
Conclusion & Impact:Besides, it was found by statistical analyses that 2% of the increase in the additive ratio is not sufficient to make a significant difference in the physical properties of bitumen, therefore, the increase should be at least 4%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Asphalt Binder · Bitumen Modification · EPS

Abstract

Waste polymers are widely used in asphalt modification, especially, in order to reduce their detrimental effect on the environment. This study discusses the usability of waste expanded polystyrene (EPS) foam in asphalt modification. In this respect, the EPS foam, which produces waste in both production and use stages, was mixed with bitumen by weight at the ratios of 2%, 4%, 6%, and 8%, and dry modification method was employed. The penetration, ductility, softening point, flash point, and specific gravity values of virgin bitumen were compared with waste EPS foam modified bitumen. The comparison was made by both graphical and statistical methods. A strong correlation between the physical properties of modified asphalt and the ratio of EPS foam was observed. A drop was observed in penetration and ductility values. Besides, it was found by statistical analyses that 2% of the increase in the additive ratio is not sufficient to make a significant difference in the physical properties of bitumen, therefore, the increase should be at least 4%. Overall, it is concluded that EPS foam additive can be used in bitumen modification for hot regions where low penetration is required.

🔖

Cite This Article

YILDIZ, K., KINACI, H., ATAKAN, M. (2021). Modification of Asphalt Binder with Waste Expanded Polystyrene (EPS) Foam. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 17 - Sayı: 3, 245–252. https://ajindex.com/articles/384007

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Papagiannakis, A.T. and Masad, E.A. Pavement Design and Materials; John Wiley & Sons, Inc.: Hoboken, New Jersey, 2008
  2. Baytekin, B., Baytekin, H.T., and Grzybowski, B.A. 2013. Retrieving and converting energy from polymers: Deployable technologies and emerging concepts. Energy and Environmental Science. 6 (12): 3467–3482
  3. Hearon, K., Nash, L.D., Rodriguez, J.N., Lonnecker, A.T., Raymond, J.E., Wilson, T.S., Wooley, K.L., and Maitland, D.J. 2014. A high-performance recycling solution for polystyrene achieved by the synthesis of renewable poly(thioether) networks derived from d -limonene. Advanced Materials. 26 (10): 1552–1558
  4. Pol, V.G. 2010. Upcycling: Converting waste plastics into paramagnetic, conducting, solid, pure carbon microspheres. Environmental Science and Technology. 44 (12): 4753–4759
  5. Mohamed, N., Maharaj, R., and Ramlochan, D. 2017. Rutting and fatigue cracking susceptibility of polystyrene modified asphalt. Am J Appl Sci. 14 (5): 583–591
  6. Casey, D., McNally, C., Gibney, A., and Gilchrist, M.D. 2008. Development of a recycled polymer modified binder for use in stone mastic asphalt. Resources, Conservation and Recycling. 52 (10): 1167–1174
  7. Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., and Zanzotto, L. 2005. Asphalt modification with different polyethylene-based polymers. European Polymer Journal. 41 (12): 2831–2844
  8. Baker, M.B., Abendeh, R., Abu-Salem, Z., and Khedaywi, T. 2016. Production of sustainable asphalt mixes using recycled polystyrene. International Journal of Applied Environmental Sciences. 11 (1): 183–192
  9. Vila-Cortavitarte, M., Lastra-González, P., Calzada-Pérez, M.Á., and Indacoechea-Vega, I. 2018. Analysis of the influence of using recycled polystyrene as a substitute for bitumen in the behaviour of asphalt concrete mixtures. Journal of Cleaner Production. 170 1279–1287
  10. Padhan, R.K., Sreeram, A., and Gupta, A. 2020. Evaluation of trans-polyoctenamer and cross-linking agents on the performance of waste polystyrene modified asphalt. Road Materials and Pavement Design. 21 (4): 1170–1182
  11. Barzegari, M.R., Yousefi, A.A., and Zeynali, M.E. 2002. Bitumen modification via PS/PB Blend. Iranian Journal of Polymer Science and Technology (Persian)
  12. Nciri, N., Shin, T., and Cho, N. 2020. Towards the Use of Waste Expanded Polystyrene as Potential Modifier for Flexible Road Pavements. Materials Today: Proceedings. 24 763–771
  13. Nassar, I.M., Kabel, K.I., and Ibrahim, I.M. 2012. Evaluation of