Journals / Turkish Journal of Physics / 2005 / Cilt: 29 - Sayı: 1

Design and Preparation of Antireflection Films on Glass Substrate

Pages
43–53
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The prepared samples have shown very good results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Antireflection coatings (ARC) have been modeled and prepared experimentally for optical and electro-optical applications in the visible spectrum (0.4--0.7 m m) to reduce reflections from the surface of glass.
📊
Key Findings & Data:Reflection of BK7 bare glass substrate varies from 3.5 to 6.0% over the desired spectrum.
💡
Conclusion & Impact:The prepared samples have shown very good results.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Antireflection coatings · multilayer structures. · Antireflection coatings

Abstract

Antireflection coatings (ARC) have been modeled and prepared experimentally for optical and electro-optical applications in the visible spectrum (0.4--0.7 m m) to reduce reflections from the surface of glass. Reflection of BK7 bare glass substrate varies from 3.5 to 6.0% over the desired spectrum. This value is reduced reasonably by integrating multilayer thin films, based on dielectric materials, behaving as ARC. Three different three-layer configurations are deposited on glass substrate. The reflection profiles of theoretical and experimental curves are compared and analyzed to demonstrate the use of these multilayered structures. The physical parameters and deposition conditions of the three configurations are optimized before multilayer deposition. The prepared samples have shown very good results.

Özet

Antireflection coatings (ARC) have been modeled and prepared experimentally for optical and electro-optical applications in the visible spectrum (0.4--0.7 m m) to reduce reflections from the surface of glass. Reflection of BK7 bare glass substrate varies from 3.5 to 6.0% over the desired spectrum. This value is reduced reasonably by integrating multilayer thin films, based on dielectric materials, behaving as ARC. Three different three-layer configurations are deposited on glass substrate. The reflection profiles of theoretical and experimental curves are compared and analyzed to demonstrate the use of these multilayered structures. The physical parameters and deposition conditions of the three configurations are optimized before multilayer deposition. The prepared samples have shown very good results.

🔖

Cite This Article

ASGHAR, M. H., KHAN, M. B., NASEEM, S., KHAN, Z. A. (2005). Design and Preparation of Antireflection Films on Glass Substrate. Turkish Journal of Physics, Cilt: 29 - Sayı: 1, 43–53. https://ajindex.com/articles/378764

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...