Journals / Turkish Journal of Physics / 2007 / Cilt: 31 - Sayı: 4

Study of Vickers' micro hardness on $InBi_{0.85}Sb_{0.15}$ single crystals

Pages
231–233
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The effect of perfection of crystals on micro hardness with respect to the cold-worked, as-cleaved and annealed crystals have been studied and the results are reported.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:$InBi_{0.85}Sb_{0.15}$ single crystals have been grown by zone-melting method.
📊
Key Findings & Data:The growth velocity was 0.8 cm/h and the freezing interface temperature was 35 ◦C/cm.
💡
Conclusion & Impact:The effect of perfection of crystals on micro hardness with respect to the cold-worked, as-cleaved and annealed crystals have been studied and the results are reported.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

$InBi_{0.85}Sb_{0.15}$ single crystals have been grown by zone-melting method. The growth velocity was 0.8 cm/h and the freezing interface temperature was 35 ◦C/cm. A Vickers’ projection microscope was used for the study of micro hardness of the crystals. Hardness tests were carried out on the as-cleaved, cold-worked and annealed surfaces of the crystals. The effect of perfection of crystals on micro hardness with respect to the cold-worked, as-cleaved and annealed crystals have been studied and the results are reported.

🔖

Cite This Article

SHAH, D., PANDYA, R. G., VYAS, M. S., JANI, M. P. (2007). Study of Vickers' micro hardness on $InBi_{0.85}Sb_{0.15}$ single crystals. Turkish Journal of Physics, Cilt: 31 - Sayı: 4, 231–233. https://ajindex.com/articles/378128

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. V. P. Bhatt and C. F. Desai, Indian J Pure and Appl Phys., 16, (1978), 960
  2. S. Fischer, TMS-AIME, 230, (1964), 340
  3. T. M. Jani, G. R. Pandya and C. F. Desai, Cryst. Res. Technol., 28(5), (1993), k40
  4. G. R. Pandya and S. M. Vyas, Cryst. Res. Technol., 28, (1993), 163
  5. Y. Satio, J. Phys. Soc. Japn., 17, (1962), 716
  6. G. R. Pandya, C. F. Desai, R. C. Shah and K. R. Shah, Cryst. Res. Technol., 33 (5), (1998), 733
  7. G. R. Pandya, S. M. Vyas and C. F. Desai, Indian J Pure and Appl Phys., 33, (1995), 191
  8. H. Buckle, Rev. Metall., 48, (1951), 957
  9. Braunovic, The science of hardness testing and its research applications, ed. Westbrook and Conrad, (ASM, Ohio. 1973) P. 329.