Journals / Turkish Journal of Engineering and Environmental Sciences / 2002 / Cilt: 26 - Sayı: 2

Numerical Analysis of Hydrogen Storage in Metal-Hydride Beds

Pages
201–207
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Numerical results show that hydrogen absorption is completed faster near the cooled wall, while it takes longer at the center.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, hydrogen absorption in a metal-hydride bed is numerically investigated.
📊
Key Findings & Data:The mathematical model considers the heat and mass transfer and thechemical reaction that take place during the absorption.
💡
Conclusion & Impact:Numerical results show that hydrogen absorption is completed faster near the cooled wall, while it takes longer at the center.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Metal-Hydride Bed · Storage · Hydrogen absorption

Abstract

In this study, hydrogen absorption in a metal-hydride bed is numerically investigated. The mathematical model considers the heat and mass transfer and thechemical reaction that take place during the absorption. The hydride bed heats up due to the exothermic reaction. Numerical results show that hydrogen absorption is completed faster near the cooled wall, while it takes longer at the center. Hydriding processes are investigated with the temperature histories, H/M ratio and temperature distributions at several locations in the tank. Th estimated H/M ratio is found to agree satisfactorily with the experimental data in the literature.

Özet

In this study, hydrogen absorption in a metal-hydride bed is numerically investigated. The mathematical model considers the heat and mass transfer and thechemical reaction that take place during the absorption. The hydride bed heats up due to the exothermic reaction. Numerical results show that hydrogen absorption is completed faster near the cooled wall, while it takes longer at the center. Hydriding processes are investigated with the temperature histories, H/M ratio and temperature distributions at several locations in the tank. Th estimated H/M ratio is found to agree satisfactorily with the experimental data in the literature.

🔖

Cite This Article

ALDAŞ, K., MAT, M. D. (2002). Numerical Analysis of Hydrogen Storage in Metal-Hydride Beds. Turkish Journal of Engineering and Environmental Sciences, Cilt: 26 - Sayı: 2, 201–207. https://ajindex.com/articles/369274

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...