SavedAdd your journal

Journals / Tekstil Maraton / 2002 / Cilt: 12 - Sayı: 58

Comparison of convantional and laboratory type OE-rotor spinning systems about yarn properties

Konvansiyonel ve laboratuvar tipi OE-rotor iplik eğirme sistemlerinin iplik özellikleri bakımından karşılaştırılması

Pınar N. DURU
OSMAN BABAARSLAN
Pages
38–45
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this work, polyester/trash blending rotor yarns were produced at both the laboratory and the plant conditions and these yarns were compared with each other.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The factors which define yarn quality in the textile industry are raw material, process, know-how and personnel.
📊
Key Findings & Data:The raw material which is the most influential factor also represents the largest cost factor.
💡
Conclusion & Impact:In this work, polyester/trash blending rotor yarns were produced at both the laboratory and the plant conditions and these yarns were compared with each other.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The factors which define yarn quality in the textile industry are raw material, process, know-how and personnel. The raw material which is the most influential factor also represents the largest cost factor. The fiber blending tecnology is common used to produce qualified yarns with convenient cost. In this work, polyester/trash blending rotor yarns were produced at both the laboratory and the plant conditions and these yarns were compared with each other.

Özet

Tekstil sektöründe iplik kalitesini belirleyen; hammadde, üretim süreci (proses), bilgi-tecrübe (know-how) ve personel faktörleri içerisinde hammaddenin payı büyüktür. Hammadde, aynı zamanda en büyük üretim maliyeti faktörüdür. Tekstilde arzu edilen özelliklerde ipliğin uygun maliyetle üretilebilmesi için lif karışım teknolojisi yaygın olarak kullanılmaktadır. Bu çalışmada, poliester/telef karışımı rotor iplikleri hem laboratuvar hem de işletme şartlarında üretilerek, iplik özellikleri bakımından karşılaştınlmıştır.

🔖

Cite This Article

DURU, P. N., BABAARSLAN, O. (2002). Comparison of convantional and laboratory type OE-rotor spinning systems about yarn properties. Tekstil Maraton, Cilt: 12 - Sayı: 58, 38–45. https://ajindex.com/articles/360855