Journals / Tekstil Maraton / 2004 / Cilt: 14 - Sayı: 74

An investigation about flexural strength of fiber reinforced cement composites: Preliminary study

Lif takviyeli çimento kompozitlerin eğilme davranışının incelenmesi: Ön çalışma

Pages
70–73
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, it can be said that, polymer reinforced cement composites can be an alternative method to recycle PET wastes.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Polyethylene teraphtalate fiber and bottle production wastes were used in this study to produce polymer reinforced cement composites.
📊
Key Findings & Data:The bending behavoir of composites was evaluated using three-point bending test.
💡
Conclusion & Impact:According to the results, it can be said that, polymer reinforced cement composites can be an alternative method to recycle PET wastes.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Polyethylene teraphtalate fiber and bottle production wastes were used in this study to produce polymer reinforced cement composites. The bending behavoir of composites was evaluated using three-point bending test. Glass fiber rein-forced cement composites were also used to compare the results. According to the results, it can be said that, polymer reinforced cement composites can be an alternative method to recycle PET wastes.

Özet

Bu çalışmada, polietilen teraftalat (PET) lif ve şişe üretim atıkları polimer takviyeli çimento kompozit üretiminde kullanılmıştır. Üretilen kompozitlerin eğilme davranışı, üç noktalı eğilme testi ile değerlendirilmiştir. Takviyelendirme etkisi bilinen cam lifi, kıyaslama amaçlı olarak kullanılmıştır. Elde edilen sonuçlar, lif takviyeli çimento kompozitlerini PET atıklarının geri kazanılmasında bir yöntem olabileceğini göstermektedir.

🔖

Cite This Article

ULCAY, Y., ALTUN, Ş., DURMAZ, F. (2004). An investigation about flexural strength of fiber reinforced cement composites: Preliminary study. Tekstil Maraton, Cilt: 14 - Sayı: 74, 70–73. https://ajindex.com/articles/360814

References (7)

  1. Wang Y. Tougness Characteristics of synthetic Fiber-Reinforced Cemen titious Composites, Fatique & Fracture of Engineering Materi als&Structures, 21,1998, 521-532
  2. Craig J. Mahadev S. PAtel CC. Viteri M. Kertesz C. Behavior of joints Using Reinforced Fibrous Concrete, 126-167, in Fiber Reinforced Concrete, Ed. Hoff GC, American Concrete Institute, Detroit, 1984
  3. Banthia N. Nandakumar N. Crack Growth Resistance of Hybrid Fiber Reinforced Cement Composites, Cement&Concrete Composites, 25, 2003, 3-9 4. Savatano H. Warden PG. Courts RSP, Mechanically Pulped sisal as Rein forcement in Cementitious Matrices, Cement&Concrete Composites, 25,2003,311-319 5. Rebeiz K.S. Serhal P S and Fowler D. Shear Strength of Reinforced Polyester Concrete Using Recycled PET, Journal of Structured Engineering, September, 1995, 1370-1375
  4. Aspiras FF. Manalo JRI, Utilization of Textile Waste Cuttings as Building Material, Journal of Materials Processing Technology, 48,1995,379-384 7. Savatano H. Warden PG. Coutts RSP., Brazilian Waste Fibers as Reinforcement for cement Based Composites, Cement& Conc rete Composites, 22, 2000, 379-384
  5. Wang Y. Wu HC, Lİ VC, Concrete Reinforcement with Re cycled Fibers, Journal of Materials in Civil Engineering, Novem ber, 2000, 314-319
  6. Eriç M., Yapı Fiziği ve Malzemesi, Literatür Yayıncılık, İstanbul 1994
  7. Balaguru PN, Shah SP, Fiber Reinforced Cement Composites Mc Graw-Hill Inc., 1992. ll.Zollo, R. F., Fiber Reinforced Concrete: an Overwiev after 30 Years of Development, Cement and Concrete Composites, 19, 1997,107-122