Journals / Tekstil Maraton / 2004 / Cilt: 14 - Sayı: 73

A study on woven fabric analysis and calculations for reproducibility

Dokuma kumaş analizi ve tekrarlanabilirlik hesapları üzerine bir çalışma

Pages
42–47
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the end, the results of the analysis and calculations for reproducibility are shown.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study consists of woven fabrics analysis and weaving calculation for reproducibility.
📊
Key Findings & Data:First, brief information on weaving is given.
💡
Conclusion & Impact:In the end, the results of the analysis and calculations for reproducibility are shown.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study consists of woven fabrics analysis and weaving calculation for reproducibility. First, brief information on weaving is given. Then, it is presented an example of analysis of a woven fabric and necessary calculations for reproducibility of the same fabric. In the end, the results of the analysis and calculations for reproducibility are shown.

Özet

Bu çalışmada dokuma kumaşların analizi ve tekrarlanabilirliği için dokuma hesaplarını kapsamakladır. Önce dokuma hakkında genel bilgiler verilmiş daha sonra da dokuma kumaş analizi ve tekrarlanabilirlik için gerekli hesaplamalar sunulmuştur. Son olarak bir örnek kumaş üzerinde yapılan kumaş analiz sonuçları ve yapılan hesaplamalar gösterilmiştir.

🔖

Cite This Article

ÇELİK, N., AYYILDIZ, Ç. (2004). A study on woven fabric analysis and calculations for reproducibility. Tekstil Maraton, Cilt: 14 - Sayı: 73, 42–47. https://ajindex.com/articles/360809

References (5)

  1. Şeber, B.-Alpan, D., "Kumaş Yapı Bilgisi", Mimar Sinan Üniversitesi, Güzel Sanatlar Fakültesi, Tekstil Anasanat Dalı, İstanbul, 1989
  2. Çopur, D., "Dokuma Kumaşların analizi ve Konstrüktif Özelliklerin Belirlenmesi", Tekstil Mühendisliği Proje çalışması, Ç. Ü., Mühendislik-Mimarlık Fakültesi, Tekstil Mühendisliği Bölümü, Adana, Ocak, 2001
  3. Başer, G., "Dokuma Tekniği ve Sanatı Cilt-1", TMMOB Tekstil Mühendisleri Odası Yayınları, No:2, İzmir, 1998
  4. Acuner, A., "Tasarımda Konstrüksiyon Esasları, Mart Matbaacılık, İstanbul, Ağustos, 2001
  5. Kaplan, E., Çelik, N., Koç, E., "Dokuma Kumaş Analizi ve Uygulama Hesapları Üzerine Bir Çalışma", Tekstil Maraton Dergisi s.45-49, Eylül Ekim, 5/2003