SavedAdd your journal

Journals / Technology / 2004 / Cilt: 7 - Sayı: 3

Computer aided feature design and the forming of database for geometrical turned parts

Dönel geometrik parçalarda bilgisayar destekli unsur tasarımı ve veri tabanı oluşturulması

Cengiz ELDEM
Journal
Technology
Pages
637–648
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thus by providing a computer aided integration among the CAD/CAM/CAPP applications the speed and the flexibility in automation have been increased and the lead time has been reduced.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a computer aided database automation system, which integrates the design, process planning, and production stages with producable features has been aimed.
📊
Key Findings & Data:At the design stage, either a part to be manufactured is drawn and process plans can be drawn from it or process plans can also be obtained from a DXF file of a part model designed in a CAD program .
💡
Conclusion & Impact:Thus by providing a computer aided integration among the CAD/CAM/CAPP applications the speed and the flexibility in automation have been increased and the lead time has been reduced.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, a computer aided database automation system, which integrates the design, process planning, and production stages with producable features has been aimed. At the design stage, either a part to be manufactured is drawn and process plans can be drawn from it or process plans can also be obtained from a DXF file of a part model designed in a CAD program . Firstly, the database required to produce the part is formed, afterwards the optimisation of cutting parameters is performed and then the process planning of the part and CNC codes for it's production are produced. Thus by providing a computer aided integration among the CAD/CAM/CAPP applications the speed and the flexibility in automation have been increased and the lead time has been reduced.

Özet

Bu çalışmada, tasarımdan, işlem planlaması ve imalat aşamasına kadar, bir bütünleşme sağlayarak, imal edilebilir unsurlar yardımıyla bilgisayar destekli veri tabanı otomasyonunun gerçekleştirilmesi amaçlanmıştır. Tasarım aşamasında imalatı istenen parçanın çizimi yapılarak işlem planlaması çıkarılabileceği gibi, ayrıca bir CAD programında tasarlanan parça modeline ait DXF dosyasından da işlem planı çıkartılabilmektedir. İlk etapta parçanın imalatı için gerekli veri tabanı oluşturulmakta, daha sonra kesme parametrelerinin optimizasyonu yapılmakta ve parçanın işlem planlaması ile imalatı için gerekli CNC kodları oluşturulmaktadır. Böylece CAD/CAM/CAPP arasındaki bilgisayar, destekli bir bütünleşme sağlanarak otomasyonda hız, esneklik ve zaman kazanılmaktadır.

🔖

Cite This Article

ELDEM, C. (2004). Computer aided feature design and the forming of database for geometrical turned parts. Technology, Cilt: 7 - Sayı: 3, 637–648. https://ajindex.com/articles/359558

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Pahl, G., Beitz, W., Engineering design, a systematic approach, Springer-Verlag, 2nd edition, The design council, 1988
  2. Börklü, H. R., Makina mühendisliğinde tasarım ve tasarım işlemleri, Makina Tasarım ve İmalat Dergisi, Cilt 3, Sayı 1, s 35-41,1995
  3. Aslan, E., Uzman sistem yaklaşımıyla son işlemci tasarımı, Doktora Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 1995
  4. Aslan, E., Söylemez, E., İki eksenli sayısal denetimli takım tezgahları için bilgisayar destekli işlem planlaması ve uygulaması, 6. Uluslararası Makina Tasarım ve İmalat Kongresi, ODTÜ, Ankara, 21-23 Eylül, s 21-30, 1994
  5. Eldem, C., "Dönel Geometrik Unsurlarla Parça Modelleme ve BSD Kodu Türetme", Doktora Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2001
  6. Erve A.H. van't, Computer aided process planning for part manufacturing an expert system approach, PhD Thesis, University of Twent, 1988
  7. Cutkosky M.R., Tenenbaum J.M., Muller D., Features in process based design, ASME Computers in Engineering (CIE) Conference, San Francisco, 557-562,1988
  8. Anderson D. C., Chang T.C., 1990, Geometric reasoning in feature based design and process planning, Computer and Graphics, v 14, n 2, p. 225-235
  9. Anderson D.C., Chang T.C., Automated process planning using object-oriented feature based design, in Advanced Geometric Modelling for. Engineering Applications, eds. Krause F.-L., Jansen H., Elsevier, IFIP/GI, North Holand, 233-246,1990a
  10. Houten F.J.A.M. van, 1991, PART: a Computer aided process planning system, PhD Thesis, University of Twente, Enschede
  11. Houten F.J.A.M. van, PART: a Computer aided process planning system, PhD Thesis, University of Twente, Enschede, 1991
  12. Vin L.J. de, Computer aided planning of bending operations for sheet metal components, PhD Thesis, University of Twente, 1994
  13. Vin L.J. de, Streppel A.H., Ittersum E. van, Kals H.J.J., 1993, Toleraricing and the accuracy of bending operations in sheet metal part manufacturing, Proc. of The IMC-10 Conference, Galway, September 8-10, 423-436,1993
  14. Vin L.J. de, Streppel A.H., Kals H.J.J., 1994 b, Tolerancing and sheet bending in small batch part manufacturing, Annals of the CIRP, Vol.43/1,421-424,1994
  15. Vin L.J. de, Vries J. de, Streppel A.H., Kals H.J.J., PART-S, a CAPP system for small batch manufacturing of sheet metal components, Manufacturing Systems, (Proceedings of The CIRP Seminars), Vol. 22, No. 2, 133-141,1993
  16. Kappert J.H., Houten F.J.A.M. Kals H.J.J., The a