SavedAdd your journal

Journals / Technology / 2004 / Cilt: 7 - Sayı: 1

A theoretical investigation into the ratio of the size of associated finned heat exchanger to conventional type double pipe heat exchanger

Ortak kanatçıklı ısı değiştirici boyutunun klasik iç içe borulu tip ısı değiştirici boyutuna oranının teorik incelenmesi

Hüseyin USTA
Tayfun MENLİK
Journal
Technology
Pages
115–120
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The result of calculations, It is fixed that needed pipe in manufacturing of OK type heat exchanger is less 53 % than that of IIB type heat exchanger.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, parameters, used in dimension of associated finned heat exchanger (OK) and conventional type double pipe heat exchanger (IIB) designed for cascade condenser used in cascade refrigeartion systems, were determined.
📊
Key Findings & Data:Dimension comparing is done as example theorical calculations.
💡
Conclusion & Impact:The result of calculations, It is fixed that needed pipe in manufacturing of OK type heat exchanger is less 53 % than that of IIB type heat exchanger.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, parameters, used in dimension of associated finned heat exchanger (OK) and conventional type double pipe heat exchanger (IIB) designed for cascade condenser used in cascade refrigeartion systems, were determined. Dimension comparing is done as example theorical calculations. The result of calculations, It is fixed that needed pipe in manufacturing of OK type heat exchanger is less 53 % than that of IIB type heat exchanger.

Özet

Bu çalışmada, kademeli soğutma sistemlerinde kullanılan kaskat kondenser için tasarlanan Ortak Kanatçıktı (OK) Isı Değiştirici ile klasik tip İç İçe Borulu Isı Değiştiricilerin (İİB) boyutlandırmasında kullanılan parametreler belirlendi. Yapılan örnek teorik hesaplarla boyutlandırma karşılaştırması yapıldı. Hesaplamalar sonucunda OK tip ısı değiştirici imalatında klasik tipe göre % 53 daha az boruya ihtiyaç olduğu tespit edildi.

🔖

Cite This Article

USTA, H., MENLİK, T. (2004). A theoretical investigation into the ratio of the size of associated finned heat exchanger to conventional type double pipe heat exchanger. Technology, Cilt: 7 - Sayı: 1, 115–120. https://ajindex.com/articles/359530

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Ceylan, M., "Kademeli Soğutma Sistemlerinde Makina Tasarımı", Yüksek Lisans Tezi, G.Ü. Fen Bilimleri Enstitüsü, Ocak 2002.
  2. Ashrae Handbook - Fundamentals, Refrigerants, Bölüm 4, USA 1997.
  3. Rose, D., H., Valence, J.,H., Consideration When Purchasing an Ultra-Low Temperature Freezer", www.forma.com/Forma Web.nsf/pages/papg3 Ratts, E., B., Brown, J., S., 1999, "A Generalized Analysis for Cascading Single Fluid Vapor Compression Refrigeration Cycles Using An Entropy Generation Minimization Method", International Journal of Refrigeration, Vol. 23, pp. 353 - 365, Great Britain. Özkol, N, Uygulamalı Soğutma Tekniği, MMO Yayım, Y. No: 115, Ankara 1992.
  4. Kakaç, S., Örneklerle Isı Transferi, ODTÜ Makine Fakültesi Yaymı, Y. No: 27, Seldem Ofset Ankara 1987.
  5. Halıcı, F., Gündüz, M., Örneklerle Isı Geçişi, Geliştirilmiş İkinci Baskı, Sakarya 2001.
  6. Incropera, F, P., DeWitt, D., P., Fundamentals of Heat and Mass Transfer, Fourth Edition John and Sons Inc., New York 1996.
  7. Holman, J., P., Heat Transfer, Sixth Edition,
  8. McGraw-Hill Book Company, New York 1986.