Journals / Diagnostic and Interventional Radiology / 2021 / Cilt: 27 - Sayı: 4

Single-center experience with routine clinical use of 3D technologies in surgical planning for pediatric patients with complex congenital heart disease

Pages
488–496
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

There was a strong correlation between the models of the patients andthe anatomy encountered during the operation.CONCLUSION3D cardiac models accurately reveal the patient’s anatomy in detail and are therefore beneficial for planning surgery in patients with complex intracardiac anatomy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:PURPOSEThis study was planned to assess the application of three-dimensional (3D) cardiac modelingin preoperative evaluation for complex congenital heart surgeries.METHODSFrom July 2015 to September 2019, 18 children diagnosed with complex congenital heartdiseases (CHDs) were enrolled in this study (double outlet right ventricle in nine patients,complex types of transposition of the great arteries in six patients, congenitally correctedtransposition of the great arteries in two patients, and univentricular heart in one patient).The patients’ age ranged from 7 months to 19 years (median age, 14 months).
📊
Key Findings & Data:Before the operation, 3D patient-specific cardiac models were created based on computed tomography (CT)data.
💡
Conclusion & Impact:There was a strong correlation between the models of the patients andthe anatomy encountered during the operation.CONCLUSION3D cardiac models accurately reveal the patient’s anatomy in detail and are therefore beneficial for planning surgery in patients with complex intracardiac anatomy.
🔬Design:Modeling & Simulation
📍Scope:2015 Verileri
⚙️Variables:Domain Parameters

Özet

PURPOSEThis study was planned to assess the application of three-dimensional (3D) cardiac modelingin preoperative evaluation for complex congenital heart surgeries.METHODSFrom July 2015 to September 2019, 18 children diagnosed with complex congenital heartdiseases (CHDs) were enrolled in this study (double outlet right ventricle in nine patients,complex types of transposition of the great arteries in six patients, congenitally correctedtransposition of the great arteries in two patients, and univentricular heart in one patient).The patients’ age ranged from 7 months to 19 years (median age, 14 months). Before the operation, 3D patient-specific cardiac models were created based on computed tomography (CT)data. Using each patient’s data, a virtual computer model (3D mesh) and stereolithographic(SLA) file that would be printed as a 3D model were generated. These 3D cardiac models wereused to gather additional data about cardiac anatomy for presurgical decision-making.RESULTSAll 18 patients successfully underwent surgeries, and there were no mortalities. The 3D patient-specific cardiac models led to a change from the initial surgical plans in 6 of 18 cases(33%), and biventricular repair was considered feasible. Moreover, the models helped to modify the planned biventricular repair in five cases, for left ventricular outflow tract obstructionremoval and ventricular septal defect enlargement. 3D cardiac models enable pediatric cardiologists to better understand the spatial relationships between the ventricular septal defectand great vessels, and they help surgeons identify risk structures more clearly for detailedplanning of surgery. There was a strong correlation between the models of the patients andthe anatomy encountered during the operation.CONCLUSION3D cardiac models accurately reveal the patient’s anatomy in detail and are therefore beneficial for planning surgery in patients with complex intracardiac anatomy.

🔖

Cite This Article

YILDIZ, O., KÖSE, B., TANIDIR, İ. C., PEKKAN, K., GÜZELTAŞ, A., HAYDİN, S. (2021). Single-center experience with routine clinical use of 3D technologies in surgical planning for pediatric patients with complex congenital heart disease. Diagnostic and Interventional Radiology, Cilt: 27 - Sayı: 4, 488–496. https://ajindex.com/articles/349936

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. J Vodiskar, Kütting M, Steinseifer U, VazquezJimenez JF, Sonntag SJ. Using 3D physical modeling to plan surgical corrections of complex congenital heart defects. Thorac Cardiovasc Surg 2017
  2. 31–35. [Crossref] 2 Sasson L, Houri S, Raucher SA, et al. Right ventricular outflow tract strategies for repair of tetralogy of Fallot: Effect of monocusp valve reconstruction. Eur J Cardiothorac Surg 2013
  3. 743–751. [Crossref] 3 Li JJ, Liu Y, Xie SY, et al. Newborn screening for congenital heart disease using echocardiography and follow-up at high altitude in China. Int J Cardiol 2019
  4. 106–112. [Crossref] 4 Perloff JK, Marelli AJ. Perloff’s clinical recognition of congenital heart disease. Elsevier/Saunders, 2012. 5 Pang KJ, Meng H, Hu SS, et al. Biventricular repair of double outlet right ventricle: preoperative echocardiography and surgical outcomes. World J Pediatr Congenit Heart Surg 2017
  5. 354–360. [Crossref] 6 Bhatla P, Tretter JT, Ludomirsky A, et al. Utility and scope of rapid prototyping in patients with complex muscular ventricular septal defects or double-outlet right ventricle: does it alter management decisions. Pediatr Cardiol 2017
  6. 103–114. [Crossref] 7 Giannopoulos AA, Chepelev L, Sheikh A, et al. 3D printed ventricular septal defect patch: a primer for the 2015 Radiological Society of North America ( RSNA ) hands-on course in 3D printing. 3D Print Med 2015
  7. 31–20. [Crossref] 8 Tappa K, Jammalamadaka U. Novel biomaterials used in medical 3D printing techniques. J Funct Biomater 2018
  8. [Crossref] 9 Garcia J, Yang Z, Mongrain R, Leask RL, Lachapelle K. 3D printing materials and their use in medical education: a review of current technology and trends for the future. BMJ Simul Technol Enhanc Learn 2018
  9. 27–40. [Crossref] 10 Bartel T, Rivard A, Jimenez A, Mestres CA, Muller S. Medical three-dimensional printing opens up new opportunities in cardiology and cardiac surgery. Eur Heart J 2018
  10. 1246–1254. [Crossref] 11 Farooqi KM, Gonzalez-Lengua C, Shenoy R, Sanz J, Nguyen K. Use of a three dimensional printed cardiac model to assess suitability for biventricular repair. World J Pediatr Congenit Hear Surg 2016
  11. 414–416. [Crossref] 12 Hibino N. Three dimensional printing. World J Pediatr Congenit Hear Surg 2016
  12. 351–352. [Crossref] 13 Valverde I, Gomez-Ciriza G, Hussain T, et al. Three-dimensional printed models for surgical planning of complex congenital heart defects: an international multicentre study. Eur J Cardiothorac Surg 20