Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2021 / Cilt: 23 - Sayı: 69

Investigating the Effect of Ozonization Process Conditions on Softness/Stiffness and Strength Properties of Without Elastane Denim Fabrics

Ozonlama Proses Şartlarının Elastansız Denim Kumaşların Yumuşaklık/Sertlik ve Mukavemet Özelliklerine Etkisinin İrdelenmesi

Pages
745–754
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, it was determined that rope and slasher dyed fabrics show different behaviors as a result of ozonation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the scope of the study, it is aimed to examine the effect of ozonation process applied with ozone gas, which is a strong oxidative substance, and the effects of the changes in the process conditions on the selected performance properties of non-elastane denim fabrics.
📊
Key Findings & Data:For this purpose, 3 different ozonation times (10-20-30 minutes) and 4 different ozone rates (40% -60% -80% -100%) were applied to 2 different denim fabrics (warp dyed with rope and slasher methods).
💡
Conclusion & Impact:In addition, it was determined that rope and slasher dyed fabrics show different behaviors as a result of ozonation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In the scope of the study, it is aimed to examine the effect of ozonation process applied with ozone gas, which is a strong oxidative substance, and the effects of the changes in the process conditions on the selected performance properties of non-elastane denim fabrics. For this purpose, 3 different ozonation times (10-20-30 minutes) and 4 different ozone rates (40% -60% -80% -100%) were applied to 2 different denim fabrics (warp dyed with rope and slasher methods). Then, the tensile strength, softness/stiffness and spectrophotometric color analysis tests which are important properties according to the place of use were applied. The results obtained were evaluated statistically and graphically. Generally; it was determined that the increase in ozonation time and ozone rate affected the strength values negatively, but did not have a significant effect on stiffness. In addition, it was determined that rope and slasher dyed fabrics show different behaviors as a result of ozonation.

Özet

Çalışma kapsamında; güçlü oksidatif bir madde olan ozon gazı ile uygulanan efekt verme amaçlıozonlama işleminin ve bu işlemin proses şartlarındaki değişimlerin elastansız denim kumaşlarınseçilmiş performans özellikleri üzerindeki etkisinin irdelenmesi amaçlanmıştır. Bu amaçla 2 tipdenim kumaşa (çözgüsü halat ve slasher boyalı) 3 farklı ozonlama süresi (10-20-30 dakika) ve 4farklı ozon oranında (%40-%60-%80-%100) ozonlama işlemi uygulanmıştır. Ardından elde edilenkumaşlara kullanım yerine göre önemli olan kopma mukavemeti, yumuşaklık/sertlik vespektrofotometrik renk analizi testleri uygulanmıştır. Elde edilen sonuçlar istatistiksel ve grafikselolarak değerlendirilmiştir. Genel olarak; ozonlama süresi ve oranındaki artışın kopma mukavemetideğerlerini olumsuz etkilediği, sertliğe ise anlamlı bir etkisinin olmadığı tespit edilmiştir. Ayrıcahalat ve slasher boyalı kumaşların ozonlama işlemi sonucu farklı davranışlar gösterdiğibelirlenmiştir.

🔖

Cite This Article

ÜNAL, B. Z., KÜÇÜK, A. D. (2021). Investigating the Effect of Ozonization Process Conditions on Softness/Stiffness and Strength Properties of Without Elastane Denim Fabrics. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 23 - Sayı: 69, 745–754. https://ajindex.com/articles/348345

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Dünya Denim Kumaş Dış Ticaret Raporu, 2019. https://www.ihkib.org.tr/tr (Erişim Tarihi: 18.03.2020)
  2. Küçük, A.D., 2020, Ozonlama Proses Şartlarının Denim Kumaş Performans Özelliklerine Etkisinin İncelenmesi. Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı, Yüksek Lisans Tezi, 164s, Adana
  3. Prabaharan, M., Nayar, R.C., Kumar, N.S., Rao, J.V., 2000. A Study on The Advanced Oxidation of a Cotton Fabric by Ozone. Coloration Technology, Cilt. 116, s. 83-86. DOI: 10.1111/j.1478- 4408.2000.tb00024.x [4] Micheal, M.N., El-Zaher, N.A., 2003. Efficiency of Ultraviolet/Ozone Treatments in the Improvement of the Dyeability and Light Fastness of Wool. Journal of Applied Polymer Science, Cilt. 90, s. 3668-3675. DOI: 10.1002/APP.12941 [5] Cardis, D., Tapp, C., DeBrum, M., Rice, R. G., 2007. Ozone in the Laundry Industry - Practical Experiences in the United Kingdom. Ozone:Science&Engineering, Cilt. 29, s. 85-89. DOI: 10.1080/01919510601186048 [6] Poznyak, T., Colinders, P., Chairez, I., 2007. Treatment of Textile Industrial Dyes by Simple Ozonation with Water Recirculation. J. Mex. Chem. Soc., Cilt. 51, s. 81-86
  4. Gülümser, T., Akça, C., Bahtiyari, M.İ., 2009. Yün Terbiyesinde Ozonla İşlemin Beyazlık Derecesine Etkisinin Araştırılması, Tekstil ve Konfeksiyon Dergisi, Cilt. 19, s. 52-55
  5. Rice, R.G., DeBrum, M., Hook, J., Cardis, D., Tapp, C., 2009. Economic and Enviromental Benefits of Ozone in Ozone Laundering Systems. Ozone: Science & Engineering: The Journal of the International Ozone Association, Cilt. 31, s. 348-356. DOI: 10.1080/01919510903091839 [9] Öztürk, D., Eren, H.A., 2010. Tekstil Terbiyesinde Ozon Kullanımı. Uludağ Üniversitesi MühendislikMimarlık Fakültesi Dergisi, Cilt.15, s. 37-51
  6. Sancar Beşen, B., 2012. Tekstil Terbiyesinde Ozon Uygulamaları İle Sürdürülebilir Ekonomik Ve İnovatif Proseslerin Geliştirilmesi. Kahramanmaraş Sütçü İmam Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı, Yüksek Lisans Tezi, 155s, Kahramanmaraş
  7. Perinçek, S., Duran, K., Korlu, A.E., 2013. Combination of Ozonation and Hydrogen Peroxide Bleaching for Linen Fabrics: Optimization of the Process Using Experimental Design Technique. Ozone: Science & Engineering, Cilt. 35, s. 316-327
  8. İyizaman, Ö., 2014. Dispers Boyama Atık Suyunun Ozonlama ile Geri Kazanımı ve Tekrar Kullanımı. Uludağ Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Teknolojisi Anabilim Dalı, Yüksek Lisans Tezi, 131s, Bursa. [