Journals / Electrica / 2021 / Cilt: 21 - Sayı: 2

Analysis and Design of a Flyback Converter for Universal Input and Wide Load Ranges

Journal
Electrica
Pages
235–241
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The overall efficiency of the proposed converter atfull load was measured as 81%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Flyback converters exhibit the advantages of simple structure, low cost, small volume, isolation, and control simplicity.
📊
Key Findings & Data:However, flyback converters demonstratedisadvantages like leakage inductance; hence, losses are incurred.
💡
Conclusion & Impact:The overall efficiency of the proposed converter atfull load was measured as 81%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Flyback converters exhibit the advantages of simple structure, low cost, small volume, isolation, and control simplicity. However, flyback converters demonstratedisadvantages like leakage inductance; hence, losses are incurred. Losses pertain to the requirement of an external cooling system and external costs. It also resultsin low efficiency and the use of flyback converters in low-power applications. The discontinuous conduction mode (DCM) is used for low-power applications toachieve efficiency. In flyback converters, the reverse recovery losses of the diode are eliminated with DCM. There are many applications of flyback converters inindustrial systems, such as led drivers, battery charge systems, telecommunication systems. In this study, analysis and design of a flyback converter for universalinput and wide load ranges was performed. The detailed theoretical analysis was conducted and verified with the implementation of a DCM flyback converterfor 85 V-265 V RMS AC input voltage, 12 Vo output, 100 kHz switching frequency, and 48 W output power. The overall efficiency of the proposed converter atfull load was measured as 81%. Additionally, external cooling systems were not required, which highlighted the development of a compact design with smallvolume and ease of application for an industrial system that requires the inclusion of more serial flyback converters.

🔖

Cite This Article

GÖKÇEGÖZ, F., AKBOY, E., OBDAN, A. H. (2021). Analysis and Design of a Flyback Converter for Universal Input and Wide Load Ranges. Electrica, Cilt: 21 - Sayı: 2, 235–241. https://ajindex.com/articles/348146

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Y. Wang, J. M. Alonso, X. Ruan, “A review of LED drivers and related technologies,” IEEE Trans Industrial Electron., vol. 64, no.7, pp. 5754-5765, March, 2017. [Crossref] 2. M. O. Badawy, Y. Sozer, J. A. “De Abreu-Garcia, A novel control for a cascaded buck-boost PFC converter operating in discontinuous capacitor voltage mode,” IEEE Trans. Ind. Electron., vol. 63, no. 7, pp. 4198-4200, March, 2016. [Crossref] 3. H. Bodur, H. Yesilyurt, E. Akboy, “Passive lossless snubber for PFC ac-dc converters,” Electrica, vol. 20, no.1, pp. 98-107, Jan., 2020. [Crossref] 4. B. Akin, “Snubber circuit application for power factor correction flyback led driver,” Electrica, vol. 20, no.1, pp. 108-116, Jan., 2020. 5. H. J. Chiu, Y. K. Lo, J. T Chen, S. J. Cheng, C. Y. Lin, S. C. Mou, “A high-efficiency dimmable LED driver for low-power lighting applications,” IEEE Trans. Ind. Electron., vol.57, no.2, pp. 735-743, March, 2010. [Crossref] 6. C. B. Park, B. H. Choi, J. P. Cheon, C. T. Rim, “Robust active LED driver with high power factor and low total harmonic distortion compatible with a rapid-start ballast,” J Power Electron, vol.14, no.2, pp. 226-36, Jan, 2014. [Crossref] 7. B. Poorali, E. Adib, H. Farzanehfard, “A Single-Stage Single-Switch Soft-Switching Power-Factor-Correction LED Driver,” IEEE Trans. Power Electron., vol.32, no.10, pp. 7932-40, Dec., 2017. [Crossref] 8. N. Weidong, Y. Zongguang, W. Haibing, G. Bin, T. Long, Y. Lihang, “A PSR single-stage flyback LED driver with simple line regulation and quasi-resonant operation,” J of Semiconductors, vol.35, no.8, pp. 1-6, Jan., 2014. [Crossref] 9. C. A. Cheng, H.L. Cheng, F.L. Yang, C.W. Ku, “Single-stage driver for supplying high-power light-emitting-diodes with universal utility-line input voltages,” IET Power Electron., vol.5, no.9, pp. 1614- 1623, Nov., 2011. [Crossref] 10. T. Zhan, Y. Zhang, J. Nie, Y. Zhang, Z. Zhao, “A novel soft-switching boost converter with magnetically coupled resonant snubber,” IEEE Trans. Power Electron., vol.29, no.11, 5680-5687, Jan., 2014. [Crossref] 11. Y. Şahin, N.S. Ting, “Soft switching passive snubber cell for family of PWM DC-DC converters,” Electrical Enginnering, vol.100, pp. 1785-1796, Apr., 2018. [Crossref] 12. M. Mohammadi, E. Adib, M. R. Yazdani, “Family of soft-switching single-switch PWM converters with lossless passive snubber,” IEEE Trans. Ind. Electron.,vol.62, no.6, pp. 3473-3481, Nov., 2015. 13. N. Kondrath, M. K. Kazimierczuk, “Comparison of wide- and highfrequenc