Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 2

The effects of foundry sand components on the cast iron

Pages
127–140
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study clearly demonstrates that the products canbe obtained by changing the heat conduction coefficient of the casting moldwith different mechanical properties from the same molten metal.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Many studies are being carried out on factors such as casting temperature,cooling rate, mold design and, so on due to the effects of casting andsolidification conditions on the mechanical properties of the final product.However, given literature, there appears to be no comprehensive study on theeffect of casting mold sand components on the mechanical properties of castiron.
📊
Key Findings & Data:The microstructures of the products show that as the coolingrate slows down, the distribution of graphite particles in the structure changesfrom flakes to nodules.
💡
Conclusion & Impact:This study clearly demonstrates that the products canbe obtained by changing the heat conduction coefficient of the casting moldwith different mechanical properties from the same molten metal.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Many studies are being carried out on factors such as casting temperature,cooling rate, mold design and, so on due to the effects of casting andsolidification conditions on the mechanical properties of the final product.However, given literature, there appears to be no comprehensive study on theeffect of casting mold sand components on the mechanical properties of castiron. From this point of view within the scope of this study, the effects of castingmold sand and binder on the cast iron were investigated. By using silica andolivine as foundry sand at different ratios, bentonite and perlite as binders, theeffects of them on the microstructure and the mechanical properties of castingwere investigated. The microstructures of the products show that as the coolingrate slows down, the distribution of graphite particles in the structure changesfrom flakes to nodules. These structural changes are very matched with theresults of mechanical properties. Therefore, when the cooling rate decreases,the hardness decreases from 310 HV to 239 HV in all of the groups. Also, thebending strength is going from 971.53 MPa to 487.42 MPa, like in the hardnessresults. On the contrary, the deformation increases from 13 % to 24 % whencooling rates decreases. This study clearly demonstrates that the products canbe obtained by changing the heat conduction coefficient of the casting moldwith different mechanical properties from the same molten metal.

🔖

Cite This Article

ALİSİR, S., CEVİK, S. (2020). The effects of foundry sand components on the cast iron. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 2, 127–140. https://ajindex.com/articles/340350

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Heine RW, Loper CR, Rosenthal PC. Principles of Metal Castings. 26th reprint, TMH ed. New York, USA, 2003, p. 86
  2. ELSawy EET, EL-Hebeary MR, El Mahallawi ISE. Effect of manganese, silicon and chromium additions on microstructure and wear characteristics of grey cast iron for sugar industries applications. Wear. 2017; 390: 113 - 124.
  3. Gundlach R, Meyer M, Winardi L. Influence of Mn and S on the properties of cast iron part III testing and analysis. International Journal of Metal Casting. 2015; 9: 69 - 82.
  4. Sjogren T, Vomacka P, Svensson IL. Comparison of mechanical properties in flake graphite and compacted graphite cast irons for piston rings. International Journal of Cast Metals Research. 2004; 17; 65 - 71.
  5. Nakae H, Shin H. Effect of graphite morphology on tensile properties of flake graphite cast iron. Material Transactions. 2001; 42: 1428 - 1434.
  6. Salazar FR, Herrera-Trejo M, Castro M, Me'ndez JN, Torres JT, Me'ndez M. Effect of Nodule Count and Cooling Rate on As-Cast Matrix of a Cu-Mo Spheroidal Graphite. Journal of Materials Engineering and Performance. 1999; 8: 325 - 329.
  7. Ibitoye SA. Effect of the addition of sodium silicate and bulk density variation on the permeability of potter's clay-bonded moulding sand. Nigerian Society of Engineers Technical Transactions. 2005; 40: 67 - 77
  8. Gupta AK, Boruah D, Suresh N, Kamal N, Singh AK. Preparation effect of the mould systems on the microstructure and mechanical properties of spheroidised graphite iron. Int. Journal of Engineering Research and Applications. 2016; 6: 68 - 73
  9. Górny M, Tyrala E. Effect of cooling rate on microstructure and mechanical properties of thin-walled ductile iron castings. Journal of Materials Engineering and Performance. 2013; 22: 300 - 305.
  10. Adedayo AV. Effects of Addition of Iron (Fe) Filings to Green Moulding Sand on the Microstructure of Grey Cast Iron. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010; 32: 171 - 175
  11. Atanda PO, Olorunniwo OE, Alonge K, Oluwole OO. Comparison of Bentonite and Cassava Starch on the Moulding Properties of Silica Sand. Int. Journal of Materials and Chemistry. 2012; 2: 132 - 136
  12. Vaou V, Panias D. Thermal insulating foamy geopolyme