Journals / Yerbilimleri / 2007 / Cilt: 28 - Sayı: 2

The effect of micro-structure and angularity of aggregates on the slake durability index and the relationship between the slake durability index and some physical properties

Örnek mikro yapısının ve köşeliliğinin suda dağılmaya karşı duraylılık indeksine etkisi ve suda dağılmaya duraylılık indeksiyle bazı fiziksel özellikler arasındaki ilişki

Pages
99–112
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For the rock groups with micro discontinuities, disintegration was observed at the end of the second cycle for each group and it was concluded that the aggregate shape has no significant effect on the $I_{d2}$ value of these rock groups.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:There are several factors affecting the results of the slake durability test which defines the disintegration of clay-bearing rocks through wetting and drying cycles as well as slaking behavior in water.
📊
Key Findings & Data:The results of the slake durability tests indicate that angularity effects the slake durability index ($I_{d2}$) values of the rock groups without any micro discontinuity.
💡
Conclusion & Impact:For the rock groups with micro discontinuities, disintegration was observed at the end of the second cycle for each group and it was concluded that the aggregate shape has no significant effect on the $I_{d2}$ value of these rock groups.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

There are several factors affecting the results of the slake durability test which defines the disintegration of clay-bearing rocks through wetting and drying cycles as well as slaking behavior in water. These factors include angu­larity of the test specimens and structural properties of the rock material. This study aims to assess the effects of these factors on the results of the slake durability test. The. materials selected for this purpose include clay bear­ing rocks such as clayey sandstone, marl, clayey limestone, tuff, and weathered granite. Angular, subangular and rounded specimens were prepared from each rock type and subjected to the slake durability test. The results of the slake durability tests indicate that angularity effects the slake durability index ($I_{d2}$) values of the rock groups without any micro discontinuity. The $I_{d2}$ values of these types of rocks show differences as high as 26% depend­ing on the aggregate angularity. For the rock groups with micro discontinuities, disintegration was observed at the end of the second cycle for each group and it was concluded that the aggregate shape has no significant effect on the $I_{d2}$ value of these rock groups. The regression analyses conducted to determine multi-cycled slake dura­bility index via single-cycle slake durability index for the rock types used in the study indicate a strong statistical relationship. High average absolute error values occurred between experimentally and empirically defined ld val­ues as a function of $I_{s(5O)}$ and $\gamma_d$.

Özet

Kil içeren kayaların ıslanma-kuruma evreleri sonucunda aşınma ve ayrılıp suda dağılmaya karşı gösterdiği davranışını kontrol eden suda dağılmaya karşı duraylılık deneyinde, deney sonuçlarını etkileyebilen pek çok fak­tör vardır. Deney örneklerinin köşeliliği ile yapısal özellikleri de bu faktörler arasında yer almaktadır. Bu çalışmada, suda dağılmaya karşı duraylılık deneyinde kullanılmak üzere hazırlanan örneklerin köşeliliği ile yapısal özellik­lerinin deney sonuçlarını nasıl etkilediğinin nicel olarak belirlenmesi amaçlanmıştır. Bu amaçla kil içeren kumtaşı, marn, kireçtaşı, tüf ve bozunmuş granit türü kaya birimleri çalışmanın malzemesi olarak seçilmiştir. Her kaya türün­den köşeli, yarı köşeli ve yuvarlak örnekler hazırlanarak suda dağılmaya karşı duraylılık deneyine tabi tutulmuştur. Suda dağılmaya karşı duraylılık deney sonuçları, mikro süreksizlik içermeyen kayalarda, köşeliliğin suda dağılmaya karşı duraylılık indeksi ($I_{d2}$) üzerinde etkili olduğu göstermektedir. Bu tür kayaların $I_{d2}$ değerlerinde köşeliliğe bağlı olarak % 26'ya varan farklar elde edilmiştir. Mikro süreksizlik içeren kayalarda ise, ikinci çevrim sonunda her köşelilik grubunda parçalanma meydana gelmiş ve örnek şeklinin $I_{d2}$ üzerinde belirgin bir etkisi olmamıştır. Çalışmada kullanılan kaya türlerinin, çok çevrimli suda dağılmaya karşı duraylılık indekslerinin tek çevrimin sonunda belirlenen suda dağılmaya karşı duraylılık indeksinden kestirilebilmesi amacıyla geliştirilen görgül eşitlikler çok kuvvetli istatistiksel ilişkiler göstermektedir. Nokta yükü dayanım indeksi ve kuru birim hacim ağırlığından görgül eşitliklerle kestirilen ve deneyle belirlenen ld değerleri arasında oldukça yüksek ortalama mut­lak hata değerleri oluşmuştur.

🔖

Cite This Article

KOLAY, E. (2007). The effect of micro-structure and angularity of aggregates on the slake durability index and the relationship between the slake durability index and some physical properties. Yerbilimleri, Cilt: 28 - Sayı: 2, 99–112. https://ajindex.com/articles/336747

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. ASTM, 1990. Standard test method for slake slake durability of shales and similar weak rocks (D4644). Annual Book of ASTM Standards Vol. 4. 08. ASTM, Philadelphia, PA. 863-865.
  2. Aufmuth, R.E., 1974. Site engineering indexing of rocks: Field testing and instrumenta­tion of rock. American Society for Tes­ting and Materials, Special Technical Publication, 554, 81-99.
  3. Aydan, O., and Ulusay, R., 2003. Geotechnical and geoenvironmental characteristics of man-made underground structures in Cappadocia, Turkey. Engineering Geo­logy, 69, 245-272.
  4. Bayhan, E., Temel, A., Şahbaz, A., Varol, B., Kazancı, N., Görmüş, S. ve Ergin, M., 1998. Mudanya-Ulubat Gölü (Bursa Yö­resi) Orta-Üst Miyosen-Kuvaterner istifi­nin mineralojik incelenmesi. Yerbilimle­ri, 20, 55-62.
  5. Bell, F.G., Entwisle, D.C., and Culshaw, M.G., 1997. A geotechnnical survey of some British Coal Measures mudstones, with particular emphasis on durability. Engi­neering Geology, 46, 115-129.
  6. Çetin, H., Laman, M., and Ertunç, A., 2000. Settlement"and slaking problems in the world's fourth largest rock-fill dam, the Atatürk Dam in Turkey. Engineering Geology, 56, 225-242.
  7. Dhakal, G., Yoneda, T., Kato, M., and Kaneko, K., 2002. Slake durability and mineralo-gical properties of some pyroclastic and sedimentary rocks. Engineering Geo­logy, 65, 31-34
  8. Franklin, J.A., and Chandra, R., 1972. The sla­ke durability test. International Journal of Rock Mechanics and Mining Sciences, 9,-325-341.
  9. Gamble, J.C., 1971. Durability-plasticity classifi­cation of shales and other argillaceous rocks. PhD Thesis, University of Illinois (yayımlanmamış). Gökçeoğlu, C, Ulusay, R., and Sönmez., H., 2000. Factor effecting the durability of selected weak and clay-bearing rocks from Turkey, with particular emphasis on the influence of the number of drying and wetting cycles. Engineering Geo­logy, 57, 215-237. Golden Software, 2000. Didger 2.0, Golden Software Inc.,USA. ISRM, 2007. The Complete IŞRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974-2006. R. Ulusay and J.A. Hudson (eds.), An­kara. Kayabalı, K., Beyaz., T., and Kolay, E., 2006. The effect of the ph of the testing liquid on the slake durability of gypsum. Bulle­tin of Engineering Geology and the En­vironment, 65, 65-71.
  10. Ketin, L, 1955. Yozgat bölgesinin jeolojisi ve Or­ta Anadolu masifinin tektonik durumu. Türkiye Jeoloji Kurumu Bülteni, 6, 1-40.
  11. Kolay, E. ve Kayabalı, K,, 2005. Agregaların köşeliliğinin ve pürüzlülüğünün belirlen­mesinde fractal boyut yö