SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2017 / Cilt: 22 - Sayı: 2

Optimization of Organic Rankine Cycle Systems Driven by the Low-Temperature Waste Heat Sources

DÜŞÜK SICAKLIKLI ATIK AKIŞKAN DESTEKLİ ORGANİK RANKİNE ÇEVRİMLERİNİN OPTİMİZASYONU

Ahmet Serdar ÖNAL
AKIN BURAK ETEMOĞLU
Muhiddin CAN
Pages
35–51
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC).
📊
Key Findings & Data:Waste fluid input temperature and mass flow rate are fixed in each cycle.
💡
Conclusion & Impact:Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Organik Rankine Çevrimi · ekserji analizi · organik iş akışkanı

Abstract

In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC). Waste fluid input temperature and mass flow rate are fixed in each cycle. Organic working fluids such as isopentane, isobutane, R134a, R123, R245fa, R22, R13, propane and R600 have been investigated. In order to detect the optimum working fluid, first (T1K) and second law of thermodynamics (T2K) values have been analyzed for each fluid. Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

Özet

In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC). Waste fluid input temperature and mass flow rate are fixed in each cycle. Organic working fluids such as isopentane, isobutane, R134a, R123, R245fa, R22, R13, propane and R600 have been investigated. In order to detect the optimum working fluid, first (T1K) and second law of thermodynamics (T2K) values have been analyzed for each fluid. Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

🔖

Cite This Article

ÖNAL, A. S., ETEMOĞLU, A. B., CAN, M. (2017). Optimization of Organic Rankine Cycle Systems Driven by the Low-Temperature Waste Heat Sources. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 22 - Sayı: 2, 35–51. https://ajindex.com/articles/329940

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Bao, J. ve Zhao, L. (2013) A review of working fluid and expander selections for organic Rankine cycle, Renewable & Sustainable Energy Reviews, 24:325-342. doi:10.1016/j.rser.2013.03.040 Çengel, Y. ve Boles, M.A. (1989) Thermodynamics: An Engineering Approach. McGraw Hill Book Co. International Edition, Singapore, 859 p. Dai, Y.P., Wang, J.F., Gao, L. (2009). Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery, Energy Conversion and Management, 50(3):576-582. doi: 10.1016/j.enconman.2008.10.018 Etemoglu, A.B. ve Can, M. (2007) Classification of geothermal resources in Turkey by exergy analysis, Renewable & Sustainable Energy Reviews, 11:1596-1606. doi: 10.1016/j.rser.2006.01.001 Etemoglu, A.B. (2008) Thermodynamic evaluation of geothermal power generation systems in Turkey, Energy Sources, 30:905-916. doi:10.1080/15567030601082589 Heberle, F. ve Brüggemann, D. (2010) Exergy based fluid selection for a geothermal Organic Rankine Cycle for combined heat and power generation, Applied Thermal Engineering, 30(11-12):1326-1332. doi:10.1016/j.applthermaleng.2010.02.012 Hettiarachchi, H.D. M., Golubovic, M., Worek, W.M., Ikegami, Y. (2007) Optimum design criteria for an Organic Rankine cycle using low-temperature geothermal heat sources. Energy, 32(9): 1698-1706. doi:10.1016/j.energy.2007.01.005 Lee, K. M., Kuo, S. F., Chien, M. L., Shih, Y. S. (1988) Parameters analysis on organic Rankine cycle energy recovery system, Energy Conversion and Management, 28 (2):129-136. doi:10.1016/0196-8904(88)90038-6
  2. Liu, B.T., Chien, K.H., Wang, C.C. (2004) Effect of working fluids on organic Rankine cycle for waste heat recovery, Energy, 29(8): 1207-1217. doi:10.1016/j.energy.2004.01.004 Maizza, V. ve Maizza, A. (2001) Unconventional working fluids in organic Rankine-cycles for waste energy recovery systems, Applied Thermal Engineering, 21(3): 381-390. doi:10.1016/S1359-4311(00)00044-2
  3. Najjar, Y. S.H., Radhwan, A.M. (1988) Cogeneration by combining gas turbine engine with organic Rankine cycle, Heat Recovery Systems and CHP, 8 (3): 211-219. doi:10.1016/0890-4332(88)90057-9
  4. Önal, A.S. (2011) Düşük sıcaklıklı atık akışkan destekli güç üretim sistemlerinin optimizasyonu, Uludağ Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 114 s. Roy, J.P., Mishra, M.K., Misra, A. (2010) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle, Energy, 35(12): 5049-5062. doi: