SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2019 / Cilt: 24 - Sayı: 2

A New Third Order Quadrature Oscillator Design

ÜÇÜNCÜ DERECEDEN YENİ BİR QUADRATURE OSİLATÖR TASARIM

Ali İhsan KARACAN
Ahmet Gökçen MAHMUTOĞLU
Pages
217–227
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The proposedcircuit power consumption is 4.83mW.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, a third-order quadrature oscillator circuit is presented by using an inverting current feedback operational amplifier (ICFOA), an active element that has attracted considerable attention in recent years.
📊
Key Findings & Data:The workability of the circuit is verified by PSPICE simulation program and it is seen that the simulation results verify the theory and the proposed circuit has good performance.
💡
Conclusion & Impact:The proposedcircuit power consumption is 4.83mW.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this work, a third-order quadrature oscillator circuit is presented by using an inverting current feedback operational amplifier (ICFOA), an active element that has attracted considerable attention in recent years. The topology consists of two ICFOA, three capacitors and three resistors by connecting a voltage mode second-order low-pass filter and a voltage-mode integrator with a cascaded closed loop. The workability of the circuit is verified by PSPICE simulation program and it is seen that the simulation results verify the theory and the proposed circuit has good performance. The theoretical cut-off frequency is 3.979MHzand the cut-off frequency measured after the simulation is 3.933MHz. In the simulation, 0.35 μm MOSISparameter set and ICFOA CMOS structure are used. The proposedcircuit power consumption is 4.83mW.

Özet

Bu çalışmada,son zamanlarda oldukça fazla dikkat çeken bir aktif eleman olan Terslenmiş Akım Geri Beslemeli İşlemsel Yükselteç (ICFOA) kullanılarak üçüncü dereceden quadrature osilatör devresi sunulmuştur. Topoloji iki adet ICFOA, üç adet kapasitör ve üç adet direnç olmak üzere gerilim modlu ikinci dereceden alçak geçiren filtre ve gerilim modlu integratör yapısının kaskat bağlanıp kapalı çevrim oluşturması ile elde edilmiştir.Sunulan devrenin çalışabilirliği PSPICE benzetim programı ile denenmiş ve teorik sonuçlar ile örtüştüğü görülmüştür. Teorik kesim frekansı 3,979MHzve benzetim sonucu ölçülen kesim frekansı ise 3,933MHz’dir. Benzetimde 0,35 μm MOSIS parametre seti ve ICFOA CMOS yapısı kullanılmıştır. Önerilen devrenin güç tüketimi 4,83mW’dır.

🔖

Cite This Article

KARACAN, A. İ., MAHMUTOĞLU, A. G. (2019). A New Third Order Quadrature Oscillator Design. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 24 - Sayı: 2, 217–227. https://ajindex.com/articles/329898

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Chaturvedi B., Maheshwari S., 2013. Third-Order Quadrature Oscillator Circuit with Current and Voltage Outputs. Hindawi Publishing Corporation ISRN Electronics.doi:10.1155/2013/385062 2.Chen HP.,2014. Current-mode dual-output ICCII-based tunable universal biquadratic filter with low-input and high-output impedances. Int J Circuit Theory Appl;42(4):376–93.doi:10.1002/cta.1858 3.Chen HP., 2014. Voltage-mode multifunction biquadratic filter with one input and six outputs using two ICCIIs, Scientific World Journal, vol. 2014, pp. doi:10.1155/2014/432570. 4.Chen HP., Huang W., Hsieh MY., Wu KH., 2014.Universal currentmode biquadratic filter with two inputs and four outputs using ICCIIs. International Conference on Information Science, Electronics and Electrical Engineering.doi:10.1109/InfoSEEE.2014.6948103 5.Chiu W., Liu S.I, Tsao H.W., Chen J.J. 1996. CMOS differential difference current conveyors and their applications. IEE Proceedings –Circuits, Devices and Systems, 143, ss. 91–96.doi:10.1049/ip-cds:19960223. 6.Ettaghzouti, T., Hassen, N., Garradhi, K., & Besbes, K. 2018. Generation of Oscillator Circuits Using Two ICCII-Generation Current Conveyors. In 2018 15th International Multi-Conference on Systems, Signals & Devices (SSD)(pp. 441-446). IEEE.doi: 10.1109/SSD.2018.8570466. 7.Gökçen A., Göçmen MS., Çam U. 2012.Second order analog filter desing using a singleICCII. Signal Processing and Communications Applications Conference (SIU).doi: 10.1109/SIU.2012.6204437. 8.Horng J.W., Hou C.L., Chang C.M., Chung W.-Y., Tang H.-W. and Wen Y-H. 2005.Quadrature oscillators using CCIIs. Int. J. Electron, vol. 92, pp. 21–31.doi:10.1080/00207210412331332899. 9.Horng J.-W., Hou C.-L., Chang C.-M., Pan S.-W., Shie J.-Y., and Wen Y.-H., 2007.Third-order quadrature oscillator with grounded capacitors using CCIIs. WSEAS Transactions on Electronics, vol. 4, no. 1, pp. 20–22. 10.Horng J.-W., Lee H., and Wu J.-Y., 2010. Electronically tunable third-order quadrature oscillator using CDTAs. Radioengineering, vol. 19, no. 2, pp. 326–330 11.Ibrahim M. A., Kuntman H. 2002.High linearity CMOS differential current conveyor(DDCC). International Conference on Microelectronics, ss. 6–9.doi:10.1109/ICM-02.2002.1161484. 12.Ibrahim M. A., Kuntman H., Ozcan S., Suvak O., Cicekoglu O. 2004. New first-order inverting-type second-generation current conveyor-based all-pass sections including canonical forms. Electrical Engineering, 86, ss. 299–301.doi:10.1007/s00202-003-0205-3. 13.Mah