SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2018 / Cilt: 23 - Sayı: 1

New Method to Compare Indoor and Outdoor Temperature Coefficients of Photovoltaic Modules

YENİ BİR YÖNTEMLE FOTOVOLTAİK MODÜLLERİN İÇ VE DIŞ SICAKLIK KATSAYILARININ KARŞILIŞTIRILMASI

ALİ ŞENTÜRK
RÜŞTÜ EKE
Pages
127–138
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

New method proposed in this study, simulates the actual performance for both indoor and outdoor temperature coefficients and compares with actual performance measured at field to decide which type of temperature coefficient is more accurate.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a new method is presented to compare the indoor and outdoor temperature coefficients of photovoltaic module.
📊
Key Findings & Data:Precise input of temperature coefficients introduced in the simulation is very essential to obtain accurate results about the actual performance of photovoltaic module/array.
💡
Conclusion & Impact:New method proposed in this study, simulates the actual performance for both indoor and outdoor temperature coefficients and compares with actual performance measured at field to decide which type of temperature coefficient is more accurate.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sıcaklık Katsayısı · Fotovoltaik Modül · Fotovoltaik Örgü

Abstract

In this study, a new method is presented to compare the indoor and outdoor temperature coefficients of photovoltaic module. Precise input of temperature coefficients introduced in the simulation is very essential to obtain accurate results about the actual performance of photovoltaic module/array. Thus, it is important to specify which type (indoor or outdoor) of the temperature coefficient is more accurate in simulating the actual performance. The short circuit current, the open circuit voltage, the output peak power and produced energy are considered as actual performance indexes. New method proposed in this study, simulates the actual performance for both indoor and outdoor temperature coefficients and compares with actual performance measured at field to decide which type of temperature coefficient is more accurate.

Özet

Bu çalışmada, fotovoltaik modüllerin iç ve dış ortamda elde edilen sıcaklık katsayılarının karşılaştırılması için yeni bir yöntem ortaya konmuştur. Fotovoltaik modüllerin/örgülerin gerçek performanslarının doğru bir şekilde simüle edilebilmesi için doğru sıcaklık katsayılarının kullanılması oldukça önemlidir. Bu yüzden, gerçek performansın simülasyonunda hangi tip sıcaklık katsayılarının (iç veya dış) daha doğru sonuçlar vereceği belirlenmelidir. Kısa devre akımı, açık devre gerilimi, maksimum çıkış gücü ve üretilen enerji gerçek performans parametreleri olarak kabul edilmişlerdir. Bu çalışmada ortaya konan yeni yöntem, gerçek performansı iç ve dış ortam sıcaklık katsayıları için simüle etmekte ve hangi tip sıcaklık katsayılarının daha doğru olduğunu belirleyebilmek için dış ortamda ölçülen gerçek performansla karşılaştırmaktadır.

🔖

Cite This Article

ŞENTÜRK, A., EKE, R. (2018). New Method to Compare Indoor and Outdoor Temperature Coefficients of Photovoltaic Modules. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 23 - Sayı: 1, 127–138. https://ajindex.com/articles/329874

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Bellia, H., Youcef, R. ve Fatima, M. (2014) A detailed modeling of photovoltaic module using MATLAB, NRIAG Journal of Astronomy and Geophysics, 3, 53–61. doi:10.1016/j.nrjag.2014.04.001 Chenni, R., Makhlouf, M., Kerbache, T. ve Bouzid, A. (2007) A detailed modeling method for photovoltaic cells, Energy, 32, 1724–1730. doi:10.1016/j.energy.2006.12.006 Ciulla, G., Lo Brano, V., Di Dio, V. ve Cipriani, G. (2014) A comparison of different one-diode models for the representation of I–V characteristic of a PV cell, Renewable and Sustainable Energy Reviews, 32, 684–696. doi:10.1016/j.rser.2014.01.027 Cuce, E., Cuce, P.M. ve Bali, T. (2013) An experimental analysis of illumination intensity and temperature dependency of photovoltaic cell parameters, Appied Energy, 111, 374–382. doi:10.1016/j.apenergy.2013.05.025 Dubey, R., Batra, P., Chattopadhyay, S., Kottantharayil, A., Arora, B.M., Narasimhan, K.L. ve Vasi, J. (2015) Measurement of Temperature Coefficient of Photovoltaic Modules in Field and comparison with Laboratory Measurements, doi:10.1109/PVSC.2015.7355852 Dupré, O., Vaillon, R. ve Green, M.A. (2015a) Physics of the temperature coefficients of solarcells, Solar Energy Materials and Solar Cells, 140, 92–100. doi:10.1016/j.solmat.2015.03.025 Dupré, O., Vaillon, R., Green, M.A., Dupr, O., Vaillon, R. ve Green, M.A. (2015b) Experimental assessment of temperature coefficient theories for silicon solar cells, IEEE Journal of Photovoltaics, 1–5. doi:10.1109/JPHOTOV.2015.2489864 Eke, R. ve Senturk, A. (2012) Performance comparison of a double-axis sun tracking versus fixed PV system, Solar Energy, 86, 2665–2672. doi:10.1016/j.solener.2012.06.006 Emery, K., Burdick, J., Caiyem, Y., Dunlavy, D., Field, H., Kroposki, B., Moriarty, T., Ottoson, L., Rummel, S., Strand, T. ve Wanlass, M.W. (1996) Temperature dependence of photovoltaic cells, modules and systems, Twenty Fifth IEEE Photovoltaic Specialist Conference, doi:10.1109/PVSC.1996.564365 Fanney, A.H., Davis, M.W., Dougherty, B.P., King, D.L., Boyson, W.E. ve Kratochvil, J. A. (2006) Comparison of Photovoltaic Module Performance Measurements, Journal of Solar Energy Engineering, 128, 152. doi:10.1115/1.2192559 Granata, J.E., Boyson, W.E., Kratochvil, J.A., Li, B., Abbaraju, V., Tamizhmani, G. ve Pratt, L. (2011) Successful Transfer Of Sandia National Laboratories Outdoor Test Technology To Tüv Rheinland Photovoltiıc Testing Laboratory, Photovoltaic Specialists Conference (PVSC) 37th IEEE, 003132–003137
  2. Huld, T. ve