SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2019 / Cilt: 24 - Sayı: 1

Modeling and Analysis of a Bus Active Suspension System with Simscape

OTOBÜS AKTİF SÜSPANSİYON SİSTEMİNİN SIMSCAPE İLE MODELLENMESİ VE ANALİZİ

Ahmet Yasin KALKANLI
Gürsel ŞEFKAT
Pages
351–365
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Besides with Simscape, there were advantage of using similar user interface with real system and having ability to change model effortlessly.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work a Simscape model of quarter bus with active suspension system will be designed and analyzed.
📊
Key Findings & Data:As results of this paper, it was demonstrated that there are obvious similarities between the outcomes of Simscape model and mathematical model.
💡
Conclusion & Impact:Besides with Simscape, there were advantage of using similar user interface with real system and having ability to change model effortlessly.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Aktif süspansiyon · Çeyrek taşıt modeli · Simscape

Abstract

In this work a Simscape model of quarter bus with active suspension system will be designed and analyzed. Quarter vehicle model will be used for this system. Same parameters and physical model of a preliminary work (http://ctms.engin.umich.edu) will be used and results of this work will be compared with preliminary one. Modelled system will be open loop first and converted to closed loop by addition of feedback. Firstly elongation of suspension system and secondly vertical acceleration of bus chassis will be used as feedback. Results from systems with both feedbacks will be evaluated according to passenger comfort and manufacturability. As results of this paper, it was demonstrated that there are obvious similarities between the outcomes of Simscape model and mathematical model. Also it have been seen that feedback with vertical acceleration of chassis is produce best outcomes in comparison to other systems. Besides with Simscape, there were advantage of using similar user interface with real system and having ability to change model effortlessly.

Özet

Bu çalışmada fiziksel sistem simülasyon programı Simscape kullanılarak aktif süspansiyon sisteminin modeli kurulmuş ve analizi yapılmıştır. Bu sistem için çeyrek taşıt modeli kullanılmıştır. Sistem tasarımı yapılırken literatürden alınmış başka bir çalışmayla (http://ctms.engin.umich.edu) aynı fiziksel model ve parametreler kullanılmış ve alınan sonuçlar karşılaştırılmıştır. Sistemin ilk olarak açık döngü modeli daha sonra kapalı döngü modeli kurularak analizler yürütülmüştür. Sistemin geribeslemesi öncelikle süspansiyon mesafesinden, sonra şasi dikey ivmelenmesinden alınmış ve bu sonuçlara göre yolcu konforu ve üretilebilirlik değerlendirilmiştir. Çalışmanın sonucunda Simscape ile modellenen sistemin matematik modelle aynı davranışı gösterdiği görülmüştür. Bunun yanında ivme geribeslemeli sistemin diğer sistemlerden daha iyi sonuçlar verdiği anlaşılmıştır. Ayrıca Simscape kullanımı ile gerçek sisteme benzer bir arayüzde çalışma imkanı yakalanmış, model üzerindeki değişiklikler kolaylıkla yapılmıştır.

🔖

Cite This Article

KALKANLI, A. Y., ŞEFKAT, G. (2019). Modeling and Analysis of a Bus Active Suspension System with Simscape. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 24 - Sayı: 1, 351–365. https://ajindex.com/articles/329798

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Nagarkar, M.P., Patil, G.J.V. (2016). Multi-Objective Optimization of LQR Control Quarter Car Suspension System using Genetic Algorithm, FME Transactions, (2016)44. doi:10.5937/fmet1602187N 2. Rajagopal, K. and Ponnusamy, L. (2014). Multi Objective Optimization of Vehicle Active Suspension System Using Debbo Based PID Controller, International Journal of Engineering and Technology, 6(1), 252-262. 3. Savaresi, S.M., Poussot-Vassal, C., Spelta, C., Sename, O., Dugard, L., (2010) Semi-Active Suspension Control Design for Vehicles, Elsevier, ISBN: 978-0-08-096678-6. doi:10.1016/c2009-0-63839-3. 4. Cui, M., Geng, L., Wu, Z. (2017). Random Modeling and Control of Nonlinear Active Suspension, Mathematical Problems In Engineering, 2017(1). doi:10.1155/2017/4045796 5. Göhrle, C., Schindler A., Wagner A., Sawodny O., (2014). Design and vehicle implementation of preview active suspension controllers, IEEE Trans. Control Syst. Technol., Vol. 22, No. 3, pp. 1135–1142. doi:10.1109/tcst.2013.2272342 6. Fuller, C.R., Elloit, S.J., Nelson P.A. (1996)
  2. Active Control of Vibrations, Academic Press London. doi:10.1016/b978-012269440-0/50007-8 7. Fu, Z., Li, B., Ning, X., Xie, W., (2017) Online Adaptive Optimal Control of Vehicle Active Suspension Systems Using Single-Network Approximate Dynamic Programming, Mathematical Problems in Engineering, 2017(1). doi:10.1155/2017/4575926 8. Alleyne, A., Hedrick, J. K., (1995). Nonlinear Adaptive Control Of Active Suspensions, IEEE Transactions on Control Systems Technology, 3(1). doi:10.1109/87.370714 9. Van Der Sande, T.P.J., Gysen, B.L.J., Besselink, I.J.M., Paulides, J.J.H., Lomonova, E.A., nijmeijer, H. (2013). Robust Control Of An Electromagnetic Active Suspension System: Simulations And Measurements, Mechatronics, 23(2). doi:10.1016/j.mechatronics.2012.07.002 10. Wang, W.Y., Chen, M.C., Su, S.F. (2012). Hierarchical T-S Fuzzy-Neural Control Of Anti-Lock Braking System And Active Suspension in a Vehicle, Automatica. A Journal of IFAC, the International Federation of Automatic Control, 48(8). doi:10.1016/j.automatica.2012.05.033 11. Jahromi, A. F. and A. Zabihollah, (2010). Linear quadratic regulator and fuzzy controller application in full-car model of suspension system with magnetor-heological shock absorber, in Proceedings of IEEE/ASME International Conference on Mechatronics and Embedded Systems and Applications, pp. 522–528. doi:10.1109/mesa.2010.5552010 12. Wong, P.-K., Shaojia H., Tao X., Cheong W. H., Zhengchao X. (2012).