Journals / Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi / 2003 / Cilt: 18 - Sayı: 1

Physical and mechanical properties of the Burhan-Morcalı (Karaman) marbles

Burhan-Morcalı (Karaman) mermerlerinin fiziksel ve mekanik özellikleri

Pages
37–42
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The physical and mechanical test results of the marbles are broadly found in agreement with the Turkish Standards Institutes required standard valves for the natural stones for their use as building stones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The marble deposits known as Karaman Toros beige is located between the towns of Burhan and Morcalı in 10 km. southwest of the Burhan- Morcalı (Karaman) provence centre.
📊
Key Findings & Data:The marbles in the region were formed in small and large blocks within the ophiolitic rocks.
💡
Conclusion & Impact:The physical and mechanical test results of the marbles are broadly found in agreement with the Turkish Standards Institutes required standard valves for the natural stones for their use as building stones.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The marble deposits known as Karaman Toros beige is located between the towns of Burhan and Morcalı in 10 km. southwest of the Burhan- Morcalı (Karaman) provence centre. The marbles in the region were formed in small and large blocks within the ophiolitic rocks. Beige and pale gray coloured marbles are made up if sparitic calcite with lesser amount of clay and rock fragments. The physical properties such as unit weight, water absorption at atmospheric pressure (by weight and volume), ratio of fullness, porosity, hardness (Mohs and Schmidt) and mechanical properties such as compressive strength (before and after freezing), Impact strength, tensile strength, bending strength and loss of strength after freezing these marbles were investigated. The physical and mechanical test results of the marbles are broadly found in agreement with the Turkish Standards Institutes required standard valves for the natural stones for their use as building stones.

Özet

Karaman il merkezinin 10 km güneybatısında Burhan ve Morcalı kasabaları arasında Karaman Toros beji olarak adlandırılan mermer yatakları yer almaktadır. Yöredeki mermer oluşumları ofiyolitik kayaçlar içerisinde irili ufaklı bloklar şeklinde bulunmaktadır. Bej ve açık gri renkli bu mermerler çoğunlukla sparitik kalsitten oluşmuş az miktarda kil ve kayaç parçacıkları içermektedir. Mermerlerin, birim hacim ağırlık, su içeriği, hacimce ve ağırlıkça su emme, doluluk oranı, gözeneklilik, yoğunluk, Mohs sertlik ve Schmidt darbe dayanımı gibi fiziksel özellikleri ile tek eksenli sıkışma dayanımı, darbe dayanımı, çekme dayanımı (brazilian), eğilme dayanımı, dona karşı dayanım ve don sonrası tek ekserdi sıkışma dayanımı gibi mekanik özellikleri laboratuvarda araştırılmış ve bu mermerler için elde edilen sayısal değerler, Türk Standartları Enstitüsünce, kaplama malzemesi olarak kullanılabilecek taşlar için önerilen standart değerlere büyük oranda uyduğu belirlenmiştir.

🔖

Cite This Article

DÖYEN, A., ZEDEF, V., SÜMER, E., KOÇAK, K. (2003). Physical and mechanical properties of the Burhan-Morcalı (Karaman) marbles. Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt: 18 - Sayı: 1, 37–42. https://ajindex.com/articles/318233

References (6)

  1. ASTM, 1992, Standard test method for evaluation of durability of rock for erosion control under freezing and thawing thawing conditions (ASTM D 5312-92).
  2. Annual Book of ASTM Standards, Construction: Soil and Rock. ASTM Publication, 1344-1346.
  3. Bieniawski, Z. T., 1973, Engineering classification of jointed rock masses. Trans S. Afr. Inst. Civ. Engrs. 15,335-344. CANMET, 1997, Laboratory classification tests. In Pit Slope Manual of CANMET, Supplement 3 -1, Canada. Centre for Mineral and Energy Technology Report,77, 25-31. ISRM, 1981, Rock characterization, testing and monitoring: ISRM Suggested Methods. E.T. Brown (ed), Pergamon Press, 211s. Koçyiğit, A., 1976, Karaman - Ermenek (KONYA) bölgesinde ofiyolitli melanj ve diğer oluşuklar: TJK Bült., 19, 2,103-116.
  4. Onargan, T. ve Köse, H., 1997,
  5. Mermer, Dokuz Eylül Üni. Müh. Fak. Yayını, Yayın No:220, 209s. Özçelik, O., 1984, Toroslar'da Bozkır yöresinin jeolojisi, tektonik evrimi ve petrol olanakları: Doktora Tezi Selçuk Üniversitesi, Fen Bilimleri Enstitüsü, 221s. Özgül, N., 1976, Toroslar'ın bazı temel jeoloji özellikleri: Türkiye Jeol. Kur. Büİt., 19, 65-78.
  6. Sümer, E., 2001, Karaman'ın güneybatısının jeoloji incelemesi ve mermer yatakları: Yüksek Lisans Tezi, Selçuk Üniversitesi, Fen Bilimleri Enstitüsü, 59s. TS 1910,1977, Kaplama olarak kullanılan doğal taşlar: Türk Standartları Enstitüsü. 7s. TS 2513,1977, Doğal yapı taşlan: Türk Standartları Enstitüsü, 5s. TS 699,1987, Tabii yapı taşları - muayene ve deney metotları: Türk Standartları Enstitüsü. 82s. Ulusay, R., Gökçeoğlu, C. ve Binal, A., 2001, Kaya mekaniği laboratuvar deneyleri: TMMOB jeoloji Mühendisleri Odası, Yayın no: 58,161s.