Journals / Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi / 2003 / Cilt: 18 - Sayı: 1

Reductions to geodetic measurements and their impacts on adjustments results

Jeodezik ölçülere getirilen indirgemeler ve dengeleme sonuçlarına etkisi

Pages
11–19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, correction on the measurements and its reasons are discussed and these correction on the results of adjustment are also evaluated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:All of the geodetic works mainly base on the triangulation points.
📊
Key Findings & Data:The measurement carried out on the triangulation points to produce a map are to be physical surface.
💡
Conclusion & Impact:In this study, correction on the measurements and its reasons are discussed and these correction on the results of adjustment are also evaluated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

All of the geodetic works mainly base on the triangulation points. The measurement carried out on the triangulation points to produce a map are to be physical surface. However the measurements on the physical surface can not to directly be used for the purpose of geodetic means. Some correction should be carried out on these measurements. In this study, correction on the measurements and its reasons are discussed and these correction on the results of adjustment are also evaluated.

Özet

Jeodezik çalışmaların temeli nirengi noktalarıdır. Harita üretmek amacıyla tesis edilen nirengi noktalarında yapılan ölçüler fiziksel yeryüzündedir. Fiziksel yeryüzünde yapılan bu ölçüler jeodezik amaçlarda doğrudan kullanılamazlar. Bu ölçülere bir takım düzeltmelerin getirilmesi gerekir. Bu çalışmada ölçülere getirilen düzeltmeler ve nedenleri açıklanmakta, bu düzeltmelerin dengeleme sonuçlarına etkisi araştırılmaktadır.

🔖

Cite This Article

TURGUT, B., İNAL, C. (2003). Reductions to geodetic measurements and their impacts on adjustments results. Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt: 18 - Sayı: 1, 11–19. https://ajindex.com/articles/318122

References (11)

  1. Arslan, E., 1988,Harita-Kadastro 88 Sempozyumu, İstanbul.
  2. Ateş, T., 1958, Harita Tarihçesi ve Türkiye'de Harita İşleri, Harita Dergisi Sayı: 54-55-56, Ankara. B.Ö.H.Y.Y., 1989, Büyük Ölçekli Haritaların Yapım Yönetmeliği TMMOB Harita ve Kadastro Mühendisleri Odası, İstanbul Şubesi, İstanbul.
  3. Erokan, İ.,, 1966,
  4. Türkiye Ana Nirengi Şebekesi, Harita ve Kadastro Mühendisleri Dergisi, Sayı: 4,s.26-41,
  5. Ankara.
  6. Kıran, H., 1983,
  7. İleri Jeodezi Ders Notları, Yıldız Teknik Üniversitesi,
  8. İstanbul Sakatow, P., 1967,
  9. Lehbuch der höheren Geodeesie, Berlin. Tuğluoğlu, A., 1975, GeodezikÖlçülerin Elipsoid Yüzeyine İndirgenmesi, İDMMA Doçentlik Çalışması, 675, İstanbul.
  10. Turgut, B., 1991, Ülke Nirengi Ağının BüyükÖlçekli Harita Yapımına Uygunluğu, S.Ü.Fen Bilimleri Enstitüsü, Doktora Tezi,114 sayfa, Konya. Ulsoy, E., Güneş İ.H., 1984,
  11. Ülke Jeodezi, Ağları, İTÜ İnşaat Fakültesi, Jeodezi ve Fotogrametri Mühendisliği Bölümü, Jeodezi Birimi Yayınları No:2, 2265, İstanbul.