Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 2

Corrosion behavior of heat treated Mg-xZn (x=0.5 – 3) alloys

Pages
107–114
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It can be suggested that in the galvanic couple of Mg-3Zn, α-Mg matrix phase behaves as an anode and MgZn intermetallic phase behaves as a cathode.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this study is to investigate the effects of zinc (0,5-1-2-3 wt.%) additions and heat treatment parameters on the microstructure, hardness and corrosion properties of magnesium zinc alloys.
📊
Key Findings & Data:After the solution heat treatment at 400ºC, the samples subjected to 8 and 16 hours heat treatment.
💡
Conclusion & Impact:It can be suggested that in the galvanic couple of Mg-3Zn, α-Mg matrix phase behaves as an anode and MgZn intermetallic phase behaves as a cathode.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

The purpose of this study is to investigate the effects of zinc (0,5-1-2-3 wt.%) additions and heat treatment parameters on the microstructure, hardness and corrosion properties of magnesium zinc alloys. After the solution heat treatment at 400ºC, the samples subjected to 8 and 16 hours heat treatment. Microstructure studies showed that the grain size decreased with the increase of Zn content and the MgZn intermetallic phase was formed by the addition of 3 wt.% Zn. Hardness of the samples was increased with increase of Zn content before and after heat treatment. For the as-cast samples, as the amount of Zn increased, corrosion current density (Icorr) and corrosion rate (Pi) increased. As the amount of Zn increased, Icorr and Pi values decreased after 8 hours and 16 hours of heat treatment respectively. It can be suggested that in the galvanic couple of Mg-3Zn, α-Mg matrix phase behaves as an anode and MgZn intermetallic phase behaves as a cathode.

🔖

Cite This Article

KOÇ, E., MAKHLOF, F. M. S. (2019). Corrosion behavior of heat treated Mg-xZn (x=0.5 – 3) alloys. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 2, 107–114. https://ajindex.com/articles/316754

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Eliezer D, Aghion E and Froes FH. Magnesium science, technology and applications. Advanced Performance Materials, 1998; 5 (3): 201 – 212.
  2. Friedrich H and Schumann S, Research for a new age of magnesium in the automotive industry. Journal of Materials Processing Technology, 2001; 117: 276 – 281.
  3. Agnew S.R. Wrought magnesium: a 21st century Outlook. The Journal of the Minerals, Metals & Materials Society, 2004; 56 (5): 20 – 21. https://doi.org/10.1007/s11837- 004-0120-8 [4] Gaines L. Cuenca R. Stodolsky F. and Wu S. Potential automotive uses of wrought magnesium alloys. Automotive Technology Development, Detroit, Michigan, 1996; 1 – 7.
  4. Housh S. Mikucki B and Stevenson A. Selection and application of magnesium and magnesium alloys. ASM Handbook 10th Edition, 1998; 2: 455 – 479
  5. Bakhsheshi-Rad HR, Hamzah E, Medraj M, Idris MH, Lotfabadi AF, Daroonparvar M and Yajid MAM. Effect of heat treatment on the microstructure and corrosion behaviour of Mg–Zn alloys. Materials and Corrosion, 2014; 65(10): 999 – 1006.
  6. Song GL, Atrens A, St.john D, Nairn J and Li, Y. The electrochemical corrosion of pure magnesium in 1 N NaCl. Corrosion Science, 1997; 39: 855 – 875.
  7. Zhang T, Li Y and Wang F. Roles of β phase in the corrosion process of AZ91D magnesium alloy. Corrosion Science, 2006;48: 1249 – 1264.
  8. Lee YC, Dahle AK and StJohn SH. The role of solute in grain refinement of magnesium. Metallurgical Materials Transactions A, 2000; 31(11): 2895 – 2906.
  9. Xian-bin L, Da-yong S, Ying-wei S and En-hou H. Effects of heat treatment on corrosion behaviors of Mg-3Zn magnesium alloy. Transactions of Nonferrous Metals Society of China, 2010; 20: 1345 – 1350.
  10. Peng LM, Chang JW, Guo, XW, Atrens A, Ding WJ and Peng YH. Influence of heat treatment microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr. Journal of Applied Electrochemistry, 2009; 39: 913 – 920.
  11. Chang JW, Guo XW, Fu PH, Peng LM and Ding WJ. Effect of heat treatment on corrosion electrochemical behaviour of Mg–3Nd–0.2Zn–0.4Zr (wt.%) alloy. Electrochimica Acta 2007; 52(9): 3160 – 3167. https://doi.org/10.1016