Journals / Selçuk Üniversitesi Ziraat Fakültesi Dergisi (:Selçuk Tarım ve Gıda Bilimleri Dergisi) / 2000 / Cilt: 14 - Sayı: 24

The determination of rupture strength in some varieties of corn

Bazı mısır çeşitlerinde kırılma dirençlerinin belirlenmesi

Pages
70–76
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Tîıe statistical analysis of variance showed that the effects on rüpture strength of variety and dimension were not significant except for Luce variety.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the ruptitte strettgth aîraıg the three major axis of four varieties com were excised as fifflcttfMtt öf molster© cottteUL The average length, width, thickness, unit mass and volume projected aren for three- major axta of seed, were 11.44 tol2.82mm,7.70 to 8.47mm,4.42 to 4.72mm, 0.310 to 0.375g, 0.235to 0.295cm3 and 0.250 to 0.875cm2 respectively at 12.92 % m.c.d.b.
📊
Key Findings & Data:The rupture strength on loaded along the three major axis were found as 80.4 to 4.63 N in moisture range of 12.90 to 36.60 % d.b.
💡
Conclusion & Impact:Tîıe statistical analysis of variance showed that the effects on rüpture strength of variety and dimension were not significant except for Luce variety.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:çeşitler · mısır · tarım makineleri

Abstract

In this study, the ruptitte strettgth aîraıg the three major axis of four varieties com were excised as fifflcttfMtt öf molster© cottteUL The average length, width, thickness, unit mass and volume projected aren for three- major axta of seed, were 11.44 tol2.82mm,7.70 to 8.47mm,4.42 to 4.72mm, 0.310 to 0.375g, 0.235to 0.295cm3 and 0.250 to 0.875cm2 respectively at 12.92 % m.c.d.b. The rupture strength on loaded along the three major axis were found as 80.4 to 4.63 N in moisture range of 12.90 to 36.60 % d.b. The highest rupture strength occurred on loaded along 'z' axis. Tîıe statistical analysis of variance showed that the effects on rüpture strength of variety and dimension were not significant except for Luce variety.

Özet

Bu çalışmada dört çeşit mısırın üç nem seviyesinde ve üç eksen boyunca kırılma dirençleri incelenmiştir. Mem içeriği %12.92 olan tanelerin uzunluk,genişlik,kalınlık,tane ağırlığı hacmi ve Üç eksende izdüşüm alanları sırasıyla ll.44-12.82mm, 7.70-8.47mm, 4.424.72tntn, 0.310-0.375g, 0.235-0.295clfl3 ve 0.250-0.875cm2 olarak belirlenmiştir. %12.92-36.60 nem içeriğindeki örneklerin üç eksen boyunca yüklemede kırılma dirençleri 80.4-463 N olarak saptanmıştır. Kırılma direnci 'z' ekseni boyunca yüklemede görülmüştür. Yapılan i analizleri sonucu, çeşit ve boyut ölçülerinin kırılma direnci üzerindeki etkisi Luce çeşidi hariç önemsiz bulunmuştur

🔖

Cite This Article

KONAK, M., MARAKOĞLU, T. (2000). The determination of rupture strength in some varieties of corn. Selçuk Üniversitesi Ziraat Fakültesi Dergisi (:Selçuk Tarım ve Gıda Bilimleri Dergisi), Cilt: 14 - Sayı: 24, 70–76. https://ajindex.com/articles/315615

References (2)

  1. Anonymous,,1990.
  2. Tarımsal Yapı ve Üretim. D.İ.E, Ankara. Aydın,C.,Öğüt,H.,1992. Bazı Biyolojik Materyallerde Deformasyon Oluşumu ve Deformasyon Enerjisiinin Belirlenmesi. Tarımsal Mekanizasyon 14. Ulusal Kongresi,1446 Ekim, 254-264, Samstrn. Browm.E.E.,1955. Bean Crack Age Studies. Research Report. Agric. Enging. Dept., Michigan State University East Lansing, Unpublished Report, 16 pp. Brusewitz,G.H.,1976 Density of Rewetted High Moisture Grains Transaction of The ASAE, 18:935-938. Çarman,K.,Aydın,C., Peker,A.,1994. Yaprak Yüzey Alanının Farklı Yöntemlerle Saptanması. S.Ü. Ziraat Fakültesi Dergisi 4(6): 41-47,Konya. Çarman,K,,1996 Some Physical Properties of Lentil Seeds. Journal of Agricultural Engineering Research.63:87-92 Dursun İ.G,1997. Bazı Ürünlerin Nokta Yükü Altında Kırılma Direncinin Belirlenmesi. Tarımsal Mekanizasyon 17. Ulusal Kongresi. 17-19 Eylül,950-957,Tokat. Hoki,M., Pickett,K.L.,4973. Factors Affecting Mechanical Damage of Navy Beans. Transactions of The ASAE, 16(6): 1154-1157. Ige,M.T.,1977. Measurement of Some Parameters Affecting The Handling Losses of Some Varieties of Cowpea. Journal of Agricultural Engineering Research,22:127-133. Özçelik.E.,Akyurt,M., SipahiS.,1977. Antep Fıstığının Mekanik Çıtlatılması. TÜBİTAK Tarım ve Ormancılık Araştırma Grubu Proje No:TOAG/229, Ankara. Peker,A.,1996. Tatıe Mısırın Bazı Fiziksel Özelliklerinin Belirlenmesi. S.Ü. Ziraat Fakültesi Dergisi, 10(12):55-65,Konya. Sitkei,G.,1986. Mechanics of Agricultural Materials. Budapest Akedemia,Kioda. Uluöz,M.,1965„ Buğday Un ve Ekmek Analiz Metotları. E.Ü. Ziraat Fakültesi Yayın No: 57,İzmir. Yılmaz,T.,198S. Fındık Kabuğunun Basınçlı Hava île Kırılması. Tarımsal Mekanizasyon 9. Ulusal Kongresi,20-22 Mayıs,Adana.