Journals / Selçuk Üniversitesi Mühendislik Bilim ve Teknoloji Dergisi / 2019 / Cilt: 7 - Sayı: 1

Investigation of the Structural Properties of Cobalt Doped Zinc Oxide Nanoparticles

KOBALT KATKILI ÇİNKO OKSİT NANOPARÇACIKLARIN YAPISAL ÖZELLİKLERİNİN İNCELENMESİ

Pages
105–114
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The present study, investigating the structural properties of Co doped ZnO nanoparticles in detail, could make a significant contribution to the potential use of doped ZnO in both spintronic and other nanotechnological applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, pure and Co (1%, 3% and 5%) doped ZnO nanoparticles were fabricated through mechanical ball milling technique, which is an inexpensive and easy method.
📊
Key Findings & Data:X-ray absorption spectroscopy results was clearly indicated that the Co2+ ions were successfully substituted into the Zn2+ sites of the ZnO wurtzite lattice without forming any detectable secondary phases.
💡
Conclusion & Impact:The present study, investigating the structural properties of Co doped ZnO nanoparticles in detail, could make a significant contribution to the potential use of doped ZnO in both spintronic and other nanotechnological applications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, pure and Co (1%, 3% and 5%) doped ZnO nanoparticles were fabricated through mechanical ball milling technique, which is an inexpensive and easy method. X-ray diffraction and synchrotron-based X-ray absorption spectroscopy measurements were used to determine the crystalline properties and local atomic structures of the obtained nanostructured products. A wurtzite structure was observed for all the samples. X-ray absorption spectroscopy results was clearly indicated that the Co2+ ions were successfully substituted into the Zn2+ sites of the ZnO wurtzite lattice without forming any detectable secondary phases. The present study, investigating the structural properties of Co doped ZnO nanoparticles in detail, could make a significant contribution to the potential use of doped ZnO in both spintronic and other nanotechnological applications.

Özet

Bu çalışmada, katkısız ve Co (%1, %3 ve %5 ) katkılı ZnO nanoparçacıkları ucuz ve kolay bir yöntem olan mekanik bilyeli öğütme tekniği ile üretildi. Elde edilen nanoyapılı ürünlerin kristal özelliklerini ve yerel atomik yapılarını belirlemek için X-ışını kırınımı ve sinkrotron-temelli X-ışını soğurma spektroskopisi ölçümleri kullanıldı. Tüm örnekler için wurtzite yapısı gözlendi. X-ışını soğurma spektroskopisi sonuçları, Co2+ iyonlarının saptanabilir herhangi bir ikincil faz oluşturmadan ZnO wurtzite örgüsündeki Zn2+ bölgelerine başarıyla geçtiğini açıkça gösterdi. Co katkılı ZnO nanoparçacıkların yapısal özelliklerini detaylı şekilde inceleyen bu çalışma, katkılı ZnO’nun hem spintronik hem de diğer nanoteknolojik uygulama alanlarındaki potansiyel kullanımına önemli bir katkı oluşturabilir.

🔖

Cite This Article

AKGÜL, G., AKGÜL, F. A. (2019). Investigation of the Structural Properties of Cobalt Doped Zinc Oxide Nanoparticles. Selçuk Üniversitesi Mühendislik Bilim ve Teknoloji Dergisi, Cilt: 7 - Sayı: 1, 105–114. https://ajindex.com/articles/312773

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. An H.R., Ahn H.J., Park J.W., 2015, “High-Quality, Conductive, and Transparent Ga-doped ZnO Films Grown by Atmospheric-Pressure Chemical-Vapor Deposition”, Ceramics International, Vol. 41, No. 2, pp. 2253-2259.
  2. Arora S.K., Foley R.W., Youtie J., Shapira P., Wiek A., 2014, “Drivers of Technology Adoption- The Case of Nanomaterials in Building Construction”, Technological Forecasting & Social Change, Vol. 87, pp. 232-244.
  3. Boisseau P., Loubaton B., 2011, “Nanomedicine, Nanotechnology in Medicine”, Comptes Rendus Physique, Vol. 12, pp. 620-636.
  4. Chattopadhyay S., Chen L.C., Chen K.H., 2011, “Energy Production and Conversion Applications of One-dimensional Semiconductor Nanostructures”, NPG Asia Materials, Vol. 3, No. 6, pp. 74-81. Coey J.M.D. and Chambers S.A., 2008, “Oxide Dilute Magnetic SemiconductorsFact or Fiction ?” MRS Bulletin, Vol. 33, No. 11, pp. 1053-1058. Dietl T., 2010, “A Ten-Year Perspective on Dilute Magnetic Semiconductors and Oxides”, Nature Materials, Vol. 9, pp. 965-974.
  5. Djenadic R., Akgül G., Attenkofer K., and Winterer M., 2010, “Chemical Vapor Synthesis and Structural Characterization of Nanocrystalline Zn1-xCoxO (x=0-0.50) Particles by X-ray Diffraction and X-ray Absorption Spectroscopy”, Journal of Physical Chemistry C, Vol. 114, pp. 9207-9215. Elilarassi R. and Chandrasekaran G., 2012, “Synthesis and Characterization of Ball Milled Fe-doped ZnO Diluted Magnetic Semiconductor”, Optoelectronics Letters, Vol. 8, No. 2, pp. 109-112.
  6. Fabbiyola S., John K.L., Aruldoss U., Bououdina M., Dakhel A.A., JudithVijaya J., 2015, “Synthesis of Codoped ZnO Nanoparticles via Co-precipitation: Structural, Optical and Magnetic Properties”, Powder Technology, Vol. 286, pp. 757-765.
  7. Franco Jr A., Pessoni H.V., 2016, “Optical Band-gap and Dielectric Behavior in Ho – doped ZnO Nanoparticles”, Materials Letters, Vol. 180, pp. 305-308.
  8. Gomez H., Maldonado A., Olvera M.L. and Acosta D.R., 2005, “Gallium-doped ZnO Thin Films Deposited by Chemical Spray”, Solar Energy Materials and Solar Cells, Vol. 87, No. 1-4, pp. 107- 116. Hasan S., 2015, “A Review on Nanoparticles: Their Synthesis and Types”, Research Journal of Recent Sciences, Vol. 4, pp. 9-11.
  9. Kang D.J., Kim J.S., Jeong S.W., Roh Y., Jeong S.H. and Boo J.H., 2005, “Structural and Electrical Characteristics of R.F. Magnetron Sputtered ZnO Films”, Thin Solid Films, Vol. 475, No. 1-2, pp. 160-165.
  10. Kaur J., Singhal S., 2014, “Facile Synthesis of ZnO and Transition Metal Doped ZnO Nanoparticles for the Photo