Journals / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2015 / Cilt: 19 - Sayı: 1

Investigation of the Usability as Concrete Aggregate of Slates and Andesite

Arduvaz ve Andezit'in Beton Agregası Olarak Kullanılabilirliğinin Araştırılması

Pages
69–74
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is come to the conclusion that produced samples meet requirements of relevant standard and waste minerals of andesite and slate can be used at concrete mixtures.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, usability of andesite and slate that are employed generally at decoration and restoration of interior and exterior coverings of structures, as concrete aggregate.
📊
Key Findings & Data:Two different cement types (CEM II/B-M (P-LL) 32.5 N and CEM I 42.5 R) are used with %25, %50, %75 and %100 replacement of aggregate.
💡
Conclusion & Impact:It is come to the conclusion that produced samples meet requirements of relevant standard and waste minerals of andesite and slate can be used at concrete mixtures.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, usability of andesite and slate that are employed generally at decoration and restoration of interior and exterior coverings of structures, as concrete aggregate. Two different cement types (CEM II/B-M (P-LL) 32.5 N and CEM I 42.5 R) are used with %25, %50, %75 and %100 replacement of aggregate. According to results acquired, mechanical and physical properties of concrete prepared with waste minerals of andesite and slate can be improved as compared to witness sample (can improve compressive strength %17.8 at samples of slate, %12.3 at samples of andesite, splitting tensile strength %16.7 at samples of slate, %8.6 at samples of andesite and bending strength %22.9 at samples of slate, %8.6 at samples of andesite). It is come to the conclusion that produced samples meet requirements of relevant standard and waste minerals of andesite and slate can be used at concrete mixtures.

Özet

Özet: Bu çalışmada; yapılarda iç ve dış kaplamalarda, dekorasyon ve restorasyon işlerinde kullanılan arduvaz ve andezit atıklarının beton agregası olarak kullanılabilirliğinin araştırılması amaçlanmıştır. İki farklı çimento tipinde (CEM II/B-M (P-LL) 32.5 N ve CEM I 42.5 R) agregaların %25, %50, %75 ve %100 olarak değiştirilmesi sonucu incelenmiştir. Elde edilen sonuçlara göre arduvaz ve andezit mineral atıklarının kullanımı ile betonların mekanik ve fiziksel özelliklerinin şahit betona göre yükseltilebilmektedir (basınç dayanımını arduvazlı numunelerde %17.8 andezitli numunelerde %12.3, yarmada çekme dayanımını arduvazlı numunelerde %16.7 andezitli numunelerde %8.6 ve eğilme dayanımı arduvazlı numunelerde %22.9 andezitli numunelerde %8.6 arttırılabilmektedir). Üretilen numunelerin ilgili standartta belirtilen sartları sağladığı ve arduvaz ve andezit mineral atıklarının beton üretiminde kullanılabileceği sonucuna varılmıştır.

🔖

Cite This Article

SOYKAN, O., ÖZEL, C., ÖCAL, C. (2015). Investigation of the Usability as Concrete Aggregate of Slates and Andesite. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 19 - Sayı: 1, 69–74. https://ajindex.com/articles/310602

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. ASTM C 127, 2001.
  2. Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. Annual Book of ASTM Standards, 5p.USA. ASTM C 128, 1997. Standard Test Method for Pulse Velocity Through Concrete. Annual Book of ASTM Standards, 49p. USA. ASTM C 597, 1997. Standard Test Method for Pulse Velocity Through Concrete. Annual Book of ASTM Standards, 4p USA. Köken, A, Köroğlu, M.A., Yonar, F., 2008. Atık Betonların Beton Agregası Olarak Kullanılabilirliği. Selçuk Üniversitesi Teknik Bilimler Meslek Yüksekokulu Teknik-Online Dergi Cilt 7. Konya. Öcal, A.D., Dal, M., 2012. Doğal Taşlardaki Bozunmalar. Mimarlık Vakfı İktisadi İşletmesi, 15-23s, İstanbul.
  3. Özel, C., 2007. Katkılı Betonların Reolojik Özeliklerinin Taze Beton Deney Yöntemlerine Göre Belirlenmesi. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü İnşaat Mühendisliği, Doktora Tezi, 249s, Isparta. Polat, H., 2012. Kolemanit’li Betonların Bazı Durabilite Özelliklerinin İncelenmesi, Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 125s, Isparta. Polat, H., Özel, C., 2012. TS EN 206-1’e göre Tasarlanan ve Zararlı Kimyasal Ortamlara Maruz Kalacak Betonların Basınç Dayanımın Bulanık Mantık Yöntemiyle Tahmini, Yapı Teknolojileri Elektronik Dergisi, 8(1) 26-35.
  4. Şengül, Ö., Taşdemir, C., Koruç, Ş., Sönmez, R., 2003. Agrega Türünün Betonun Donma - Çözülme Dayanıklılığına Etkisi. 3. Ulusal Kırma taş Sempozyumu. TS 3260, 1978. Beton Yüzey Sertliği Yolu ile Yaklaşık Beton Dayanımının Tayini, Türk Standartları Enstitüsü, Ankara. TS 3323, 2012. Beton - Basınç deney numunelerinin hazırlanması, hızlandırılmış küre tabi tutulması ve deneyleri. Türk Standartları Enstitüsü, Ankara. TS EN 933-1, 2012. Agregaların geometrik özellikleri için deneyler bölüm 1: Tane büyüklüğü dağılımı tayiniEleme metodu. Türk Standartları Enstitüsü, Ankara. TS EN 12350-2, 2002. Beton- Taze Beton DeneyleriBölüm 2: Çökme (Slamp) Deneyi. Türk Standartları Enstitüsü, Ankara. TS EN 12350-6, 2002. Beton- Taze Beton DeneyleriBölüm 6: Yoğunluk. Türk Standartları Enstitüsü, Ankara. TS EN 12390-2, 2002.
  5. Beton-Sertleşmiş Beton Deneyleri, Dayanım Deneylerinde Kullanılacak Deney Numunelerinin Hazırlanması ve Kürlenmesi, Türk Standartları Enstitüsü, Ankara. TS EN 12390-3, 2003. Beton - Sertleşmiş beton deneyleri - Bölüm 3: Deney numunelerinin basınç dayanımının tayini. Türk Standartları Enstitüsü, Ankara. TS EN 12390–4, 2002. Beton - Sertleşmiş beton deneyleri - Bölüm 4: Basınç dayanımı -