Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

Evaluation of the effect of boron waste sludge and clay on the diffusion of plasticizer to different environments from PVC composite films

Pages
263–278
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Its determined that, the mass loss of the films decreased with increasing amount of BWS and CF

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Poly (vinyl chloride) (PVC) is a rigid polymer that can also be used in flexible applications by the addition of plasticizers.
📊
Key Findings & Data:When plasticized PVC (p-PVC) film is heated, plasticizer evaporates from the surface of the film and it degrades by the loss of hydrogen chloride (HCl) gas.
💡
Conclusion & Impact:Its determined that, the mass loss of the films decreased with increasing amount of BWS and CF
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Poly (vinyl chloride) (PVC) is a rigid polymer that can also be used in flexible applications by the addition of plasticizers. When plasticized PVC (p-PVC) film is heated, plasticizer evaporates from the surface of the film and it degrades by the loss of hydrogen chloride (HCl) gas. Plasticizers are not chemically bound to the polymers, easily diffuse to the contact media during its life-time and contaminate the environments which are in contact. The aim of this study is to reduce the diffusion of plasticizer by means of boron waste sludge (BWS) and clay filler (CF, kaolinite) to assess the effects of BWS and CF on the diffusion of plasticizer. Plastisols were prepared by mixing of plasticizer, heat stabilizer, BWS and CF into PVC resin and were cured in plastigel films. Thus obtained plastigel films were subjected to heat treatment in an oven at 100, 130 and 150°C. During heat treatment diffusion of plasticizers from p-PVC films into air was studied. In addition, migration of plasticizers into hexane was compared with the migration of plasticizers into air during the heat treatment. For this purpose, the effects of BWS and CF on the migration of the plasticizer to different environments were examined. Diffusion coefficient of plasticizer was evaluated according to the Fick’s law and to determine related activation energies according to the Arrhenius relation. Oxidation index (OI) values were determined by using FTIR spectroscopy. The addition of boron waste was reduced the diffusion of the plasticizer into air and increased the activation energy value. Its determined that, the mass loss of the films decreased with increasing amount of BWS and CF

🔖

Cite This Article

DEMİR, A. P. T. (2019). Evaluation of the effect of boron waste sludge and clay on the diffusion of plasticizer to different environments from PVC composite films. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 263–278. https://ajindex.com/articles/310396

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Tüzüm-Demir AP, Ulutan S. Migration of phthalate and non‐phthalate plasticizers out of plasticized PVC films into air. Journal of Applied Polymer Science. 2013;128: 1948.
  2. Omrani I, Ahmadi A, Farhadian A, Shendi HK, Babanejad N, Nabid MR. Synthesis of a bio-based plasticizer from oleic acid and its evaluation in PVC formulations. Polymer Testing. 2016;56:237-244.
  3. Marcilla A, Garcia S, Garcia-Quesada JC. Migrability of PVC plasticizers. Polymer Testing. 2008;27:221.
  4. Jia P, Hub L, Zhang M, Feng G, Zhou Y. Phosphorus containing castor oil based derivatives: Potential non-migratory flame retardant plasticizer. European Polymer Journal. 2017;87:209–220.
  5. Brebu M, Vasile C, Rovana Antonie S, Chiriac M, Precup M, Yang J, Roy C. Study of the natural ageing of PVC insulation for electrical cables. Polymer Degradation and Stability. 2000;67:209.
  6. Wensing M, Uhde E, Salthammera T. Plastics additives in the indoor environment— flame retardants and plasticizers. Science of the Total Environment. 2005;339:19– 40.
  7. Yang Y, Huanga J, Zhanga R, Zhua J. Designing bio-based plasticizers: Effect of alkyl chain length on plasticization properties of isosorbide diesters in PVC blends. Materials & Design, 2017;126:29–36.
  8. Pyeon HB, Park JE, Suh DH. Non-phthalate plasticizer from camphor for flexible PVC with a wide range of available temperature. Polymer Testing, 2017;63:375-381.
  9. Jia P, Feng G, Bo C, Hua L, Yanga X, Zhang L, Zhang M, Zhou YA. Composition of phosphaphenanthrene groups-containing castor-oil-based phosphate plasticizer for PVC: Synthesis, characterization and property. Journal of Industrial and Engineering Chemistry, 2018; 60: 192-205.
  10. Nagorka R, Conrad A, Scheller C, Su¨benbach B, JornMoriske H. Diisononyl 1,2- cyclohexanedicarboxylic acid (DINCH) and Di(2-ethylhexyl) terephthalate (DEHT) in indoor dust samples: Concentration and analytical problems. International Journal of Hygiene and Environmental Health. 2011;214:26-35.
  11. Royaux A, Fabre-Francke I, Balcar N, Bara