Journals / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part II. Dynamic mechanical properties and fatigue behavior

Pages
1–13
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Lastly, using a higher viscosity BR in carbon black filled NR or NR/SBR is quite favorable in terms of using these composites as anti-vibrational rubber bushings in automotive applications where high fatigue resistance and lower damping factor are important criteria.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Carbon black reinforced natural rubber (NR)/butadiene rubber (BR), NR/styrene-butadiene rubber (SBR) and NR/BR/SBR composites were prepared by using two types of BR with highly linear chain structure (higher viscosity and molecular weight) and branched chain structure (lower viscosity and molecular weight).
📊
Key Findings & Data:Damping factors of NR, NR/SBR and NR/BR/SBR composites as a function of frequency were systematically compared at constant temperatures of -40, 0, 25 and 60C.
💡
Conclusion & Impact:Lastly, using a higher viscosity BR in carbon black filled NR or NR/SBR is quite favorable in terms of using these composites as anti-vibrational rubber bushings in automotive applications where high fatigue resistance and lower damping factor are important criteria.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Carbon black reinforced natural rubber (NR)/butadiene rubber (BR), NR/styrene-butadiene rubber (SBR) and NR/BR/SBR composites were prepared by using two types of BR with highly linear chain structure (higher viscosity and molecular weight) and branched chain structure (lower viscosity and molecular weight). NR/BR composite consisting of BR with higher viscosity has the highest fatigue strength. Damping factors of NR, NR/SBR and NR/BR/SBR composites as a function of frequency were systematically compared at constant temperatures of -40, 0, 25 and 60C. Based on dynamic mechanical analysis (DMA) results, the elasticity of NR/carbon black composite improves, its heat buildup character and tan  decreases with the addition of BR. The addition of 20 phr BR to NR/SBR composites provides 4-5 times better fatigue strength due to the decrease of tan . Lastly, using a higher viscosity BR in carbon black filled NR or NR/SBR is quite favorable in terms of using these composites as anti-vibrational rubber bushings in automotive applications where high fatigue resistance and lower damping factor are important criteria.

🔖

Cite This Article

BURGAZ, E., GENCOGLU, O., GOKSUZOGLU, M. (2019). Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part II. Dynamic mechanical properties and fatigue behavior. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 1–13. https://ajindex.com/articles/310376

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Legorju-jago K, Bathias C. Fatigue initiation and propagation in natural and synthetic rubbers. Int J Fatigue. 2002;24:85-92. https://doi.org/10.1016/S0142- 1123(01)00062-7 [2] Creton C, Ciccotti M. Fracture and adhesion of soft materials: a review. Rep Prog Phys. 2016;79:046601. https://doi.org/10.1088/0034-4885/79/4/046601 [3] Mars WV, Fatemi A. Factors that affect the fatigue life of rubber: A literature survey. Rubber Chem Technol. 2004;77:391-412. https://doi.org/10.5254/1.354783 [4] Tee YL, Loo MS, Andriyana A. Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. Int J Fatigue. 2018;110:115-129. https://doi.org/10.1016/j.ijfatigue.2018.01.00 [5] Findik F, Yilmaz R, Koksal T. Investigation of mechanical and physical properties of several industrial rubbers. Mater Design. 2004;25:269-276. https://doi.org/10.1016/j.matdes.2003.11.00 [6] Tangudom P, Thongsang S, Sombatsompop N. Cure and mechanical properties and abrasive wear behavior of natural rubber, styrene-butadiene rubber and their blends reinforced with silica hybrid fillers. Mater Design. 2014;53:856-864. https://doi.org/10.1016/j.matdes.2013.07.024 [7] Poompradub S, Tosaka M, Kohjiya S, Ikeda Y, Toki S, Sics I, et al. Mechanism of straininduced crystallization in filled and unfilled natural rubber vulcanizates. J Appl Phys. 2005;97:103529. https://doi.org/10.1063/1.1900927 [8] Toki S, Fujimaki T, Okuyama M. Strain-induced crystallization of natural rubber as detected real-time by wide-angle X-ray diffraction technique. Polymer. 2000;41:5423- 5429. https://doi.org/10.1016/S0032-3861(99)00724-7 [9] Huneau B. Strain-Induced Crystallization of Natural Rubber: A Review of X-Ray Diffraction Investigations. Rubber Chem Technol. 2011;84:425-452. [10] Le Cam JB, Toussaint E. The Mechanism of Fatigue Crack Growth in Rubbers under Severe Loading: The Effect of Stress-Induced Crystallization. Macromolecules. 2010;43:4708-4714. https://doi.org/10.1021/ma100042n [11] Mars WV, Fatemi A. Multiaxial stress effects on fatigue behavior of filled natural rubber. Int J Fatigue. 2006;28:521-529. https://doi.org/10.1016/j.ijfatigue.2005.07.040 [12] Mars WV, Fatemi A. Fatigue crack nucleation and growth in filled natural rubber. Fatigue Fract Eng M. 2003;26:779-789. https://doi.org/10.1046/j.1460- 2695.2003.00678.x [13] Le Cam JB, Huneau B, Verron E, Gornet L. Mechanism of fatigue crack growth in carbon black filled natural rubber. Macromolecules. 2004;37:5011-5017.