Journals / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2014 / Cilt: 18 - Sayı: 2

Investigation of Heat Storage and Comfort-Related Properties of the Heat Storing Microcapsule Incorporated Fabrics

Isı Depolama Özellikli Mikrokapsül Uygulanmış Kumaşların Isı Depolama ve Konfor ile İlgili Özelliklerinin Araştırılması

Pages
37–44
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The bending strength test results showed that microcapsule applied fabrics had a higher bending rigidity than reference fabric.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, investigation of heat storage and comfort-related properties of fabrics treated with microcapsules containing phase change material was aimed.
📊
Key Findings & Data:For this purpose, heat storage property of the microcapsules incorporated fabrics were measured by using DSC (Differential Scanning Calorimetry) instrument.
💡
Conclusion & Impact:The bending strength test results showed that microcapsule applied fabrics had a higher bending rigidity than reference fabric.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Faz değişim maddesi · Mikrokapsül · Isı depolama

Abstract

In this study, investigation of heat storage and comfort-related properties of fabrics treated with microcapsules containing phase change material was aimed. For this purpose, heat storage property of the microcapsules incorporated fabrics were measured by using DSC (Differential Scanning Calorimetry) instrument. The presence and distribution of microcapsules on fabric structure were investigated by SEM (Scanning Electron Microscope) analysis. The comfort-related mechanical, physical, and surface properties of cotton fabrics were tested by standard test methods. According to the DSC results, it was determined that fabrics treated with microcapsule had heat storage capacity of 6.1749 J/g. Air permeability values of the fabrics treated with microcapsule decreased because of closing of the pores in the structure of the fabric by microcapsules. According to the strength and friction test results, significant differences between the properties of the reference and treated fabric were not observed. The bending strength test results showed that microcapsule applied fabrics had a higher bending rigidity than reference fabric. Drape of microcapsule applied fabrics also decreased compared to untreated reference fabric

Özet

Bu çalışmada faz değişim maddesi içeren mikrokapsül uygulanmış kumaşların ısı depolama ve konfor ile ilgili özelliklerinin araştırılması amaçlanmıştır. Bu amaçla mikrokapsül uygulanmış kumaşların ısı depolama özelliği DSC (Diferansiyel Taramalı Kalorimetre) cihazı kullanılarak ölçülmüştür. Kumaş yapısındaki mikrokapsül varlığı ve mikrokapsüllerin kumaş yapısındaki dağılımı SEM (Taramalı Elektron Mikroskop) analizi ile araştırılmıştır. Kumaşların konfor ile ilişkili mekaniksel, fiziksel ve yüzey özellikleri standart test metotları ile test edilmiştir. DSC sonuçlarına göre, mikrokapsül uygulanmış kumaşların 6,1749 J/g ısı depolama kapasitesine sahip oldukları belirlenmiştir. Mikrokapsül uygulanmış kumaşların hava geçirgenlik değerleri, kumaş yapısındaki gözeneklerin mikrokapsüller ile kapanmasından dolayı azalmaktadır. Mukavemet ve sürtünme test sonuçlarına göre referans kumaş ile mikrokapsül uygulanmış kumaş özellikleri arasında önemli fark bulunmamıştır. Eğilme direnci test sonuçları mikrokapsül uygulanmış kumaşların referans kumaşa göre daha yüksek eğilme direncine sahip olduğunu göstermektedir. Dökümlülük test sonuçları incelendiğinde ise artan eğilme direnci ile ilişkili olarak mikrokapsül uygulanmış kumaşların dökümlülüğü referans kumaşlara göre daha düşük bulunmuştur.

🔖

Cite This Article

TÖZÜM, M. S., AKSOY, S. A. (2014). Investigation of Heat Storage and Comfort-Related Properties of the Heat Storing Microcapsule Incorporated Fabrics. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 18 - Sayı: 2, 37–44. https://ajindex.com/articles/310265

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Boan, Y., (2005). Physical Mechanism and Charactarization of Smart Thermal Clothing, The Hong Kong Polytechnic University, PhDThesis, Hong Kong. Tao, X., (2001).
  2. Smart Fibres, Fabrics and Clothing, Woodhead Publishing Limited, The Textile Institute, Cambridge, England. Mattila, H.R., (2006).
  3. Intelligent Textiles and Clothing, Woodhead Publishing Limited, 506p. Cambridge. Shin, Y., Yoo, D., Son, K., (2005). Development of Thermoregulating Microencapsulated PhaseChangeMaterials (PCM). IV. Performance Properties and Hand of Fabrics Treated with PCM Microcapsules. Journal of Applied Polymer Science, 97, 910-915.
  4. Materials with Kim, J., Cho, G., 2002. Thermal Storage/Release, Durability and Temparature Sensing Properties of Thermostatic Fabrics Treated with Octadecane- Containing Microcapsule. Textile Research Journal, 72 (12), 1093-1098.
  5. Bhatkhande, P.S., (2011). Development of Thermo RegulatingFabric Using PhaseChangeMaterial (PCM). Master'sThesesandDoctoralDissertations, Paper 361, Michigan, USA. Salaün, F.,Devaux, E., Bourbigot, S., Rumeau, P., (2010). Thermoregulating response of cotton fabric containing materials. ThermochimicaActa, 506, 82-93. phase change Sánchez, P.,Sánchez-Fernandez, M.V., Romero, A., Rodríguez, Development of Thermo-Regulating Textiles Using ParaffinWax Microcapsules. ThermochimicaActa, 498, 16–21. L., (2010).
  6. Alay, S., Alkan, C., Göde, F., 2012. Steady-State Thermal Comfort Properties of Fabrics Incorporated with Microencapsulated Phase Change Materials. The Journal of The Textile Institute, 103:7, 757-765.
  7. Tözüm, M.S., 2014. Isı Depolama Özellikli Mikrokapsül Uygulanmış Kumaşların Isı Düzenleme ve Konfor Özelliklerinin Belirlenmesi, Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Süleyman Demirel Üniversitesi,
  8. Isparta. Aksoy, A., Kaplan, S., 2013. Production and performance analysis of an antibacterial foot sweat pad. Fibers and Polymers, 14(2), 316-323.
  9. Yaman, N., Şenol, M. F., (2007). Hacimli Materyallerin Sürtünme Testleri İçin Alternatif Ölçüm Metodu Üzerine Bir Araştırma. Tekstil Teknolojileri Elektronik Dergisi, (2): 1 -13. Aksoy, A., (2012). Tek Kullanımlık Bakım Ve Hijyen Ürünlerinin Performans Özelliklerinin Arttırılması Üzerine Bir Çalışma. Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Süleyman Demirel Üniversitesi.
  10. Bhuvana, G.D., Raghunathan, S., (2006). Studies on Frictional Behaviour of Chitosan-Coated Fabrics. Autex Research Journal, 6(4), 216-222.
  11. Su, F.H. Zhang, Z.Z.,Wang, K., Jiang, W., Men, X.H., Liu, W.M., (2005). Fr