Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 2

Determination of the Effect of Filler Metal Type on Metallurgical and Mechanical Properties in Welding of QStE 420 TM Steel by MAG Welding Method

QStE 420 TM Çeliğinin MAG Kaynak Yöntemiyle Kaynaklanmasında Dolgu Metali Türünün Metalürjik ve Mekanik Özelliklere Etkisinin Belirlenmesi

Pages
321–332
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the tests performed; it was observed that the selected welding parameters provided the expected mechanical and metallurgical properties of welded joints.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; QStE 420 TM steel sheet plate material with fine grained and micro alloy structure, which is widely used in sectors such as defense industry and automotive industry, has been welded separately by massive and fluxed cored filler wire in metal active gas welding method.
📊
Key Findings & Data:The mechanical and metallurgical effects of different filler wires on the weld zone (main metal, heat affected zone and weld metal) were investigated by tensile, guided bend, notch impact, hardness measurement tests and macro graphic, micro graphic examinations.
💡
Conclusion & Impact:As a result of the tests performed; it was observed that the selected welding parameters provided the expected mechanical and metallurgical properties of welded joints.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:QSTE 420 TM · MAG kaynağı · makro yapı

Abstract

In this study; QStE 420 TM steel sheet plate material with fine grained and micro alloy structure, which is widely used in sectors such as defense industry and automotive industry, has been welded separately by massive and fluxed cored filler wire in metal active gas welding method. The mechanical and metallurgical effects of different filler wires on the weld zone (main metal, heat affected zone and weld metal) were investigated by tensile, guided bend, notch impact, hardness measurement tests and macro graphic, micro graphic examinations. As a result of the tests performed; it was observed that the selected welding parameters provided the expected mechanical and metallurgical properties of welded joints.

Özet

Bu çalışmada; savunma sanayi, otomotiv sanayi gibi sektörlerde yaygın olarak kullanılan ince taneli ve mikro alaşımlı yapıya sahip QStE 420 TM kalitesindeki çelik sac plaka malzeme, metal aktif gaz kaynağı yönteminde masif ve özlü tel kullanılarak ayrı ayrı birleştirilmiştir. Farklı dolgu tellerinin kaynak bölgesi (ana malzeme, ısının tesiri altındaki bölge ve kaynak metali) üzerinde oluşturduğu mekanik ve metalürjik etkiler; çekme, eğme, çentik - darbe, sertlik testleri ve makro grafik, mikro grafik muayeneler yapılarak incelenmiştir. Gerçekleştirilen testler sonucunda; seçilen kaynak parametrelerinin, kaynaklı birleştirmelerin kendinden beklenen mekanik ve metalürjik özellikleri sağladığı gözlenmiştir.

🔖

Cite This Article

HARMAN, M., ADA, H., ÇETİNKAYA, C. (2020). Determination of the Effect of Filler Metal Type on Metallurgical and Mechanical Properties in Welding of QStE 420 TM Steel by MAG Welding Method. Politeknik Dergisi, Cilt: 23 - Sayı: 2, 321–332. https://ajindex.com/articles/307517

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. İnternet: Ympress S420mc Teknik Özellikleri. Tata Steel. URL: http://www.webcitation.org/query?url=https%3A%2F%2Fwww.tatasteeleurope.com%2Fstatic_files%2FDownloads%2FGeneral%2520Industry%2520Strip%2FStrip%2520Products%2FEnglish%2FTata%2520Steel%2520-%2520YMPRESS%2520S420MC%2520-%2520data%2520sheet.pdf&date=2019-03-0, Son Erişim Tarihi: 04.03.2019
  2. Aktarer, S.M., Küçükömeroğlu, T., “The microstructure and mechanical properties of FSPed HSLA steel”, Journal of Achievements in Materials and Manufacturing Engineering, 75(2), 55-60, (2016)
  3. Taş, Z., “Yüksek dayanımlı düsük alaşımlı çeliklerde metalürjik mukavemet artırma”, Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 28(2), 97-101, (2012)
  4. İnternet: YMDA Kaynağı. Mesleki Eğitim Platformu. URL: http://www.webcitation.org/query?url=http%3A%2F%2Fwww.e-mep.com%2Fwp-content%2Fuploads%2F2017%2F02%2FY%C3%BCksek-Mukavemetli-D%C3%BC%C5%9F%C3%BCk-Ala%C5%9F%C4%B1ml%C4%B1-Celiklerin-Kaynagi-Ozlem-Karaman.pdf&date=2019-03-04, Son Erişim Tarihi: 04.03.2019
  5. Kurt, H., “Yüksek Mukavemetli Yapı Çeliklerinde Kaynaklı Bölgenin Mekanik ve Mikro yapı Özelliklerinin İncelenmesi”, Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Esntitüsü, (2014)
  6. Yalçın, M. “İnce Taneli Yüksek Mukavemetli Yapı Çeliklerinde Kaynaklı Bölgenin Mekanik ve Mikro yapı Özelliklerinin İncelenmesi”. Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü Metal Eğitimi Ana Bilim Dalı, (2008)
  7. İnternet: Steel Data (2018). URL: http://www.webcitation.org/query?url=http%3A%2F%2Fwww.steeldata.info%2Fcarbides%2Fdemo%2Flist%2Fmc.html&date=2019-02-04. Son Erişim Tarihi: 04.02.2019
  8. N. Mebarki. N, Lamesle. P, Delagnes. D, Levaillant. C, Delmas. F, “Relatıonshıp Between Mıcrostructure and Mechanıcal Propertıes Of A 5%Cr Hotwork Tool Steel”, 6th Internatıonal Toolıng Conference, France, 737-754
  9. J.G.Silva, F., Santos, J., Gouveia, R., “Dissolution Of Grain Boundary Carbides By The Effect Of Solution Annealing Heat Treatment and Aging Treatment On Heat-Resistant Cast Steel”, Hk30. Metals, 7 (251), 1-12, (2017)
  10. Kendirci, M. F., “İnce Taneli Yüksek Mukavemetli Yapı Çeliklerinde Kaynaklı Bölgelerin Isıl İşlem Mekanik ve Mikroyapı Özelliklerinin İncelenmesi”, Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü Metal Eğitimi Ana Bilim Dalı, (2008)
  11. Dündar, B., “Tozaltı Kaynak Yönteminde Altlık Olarak Kullanılan Kaynak Yöntemlerinden Kaynak Yeterliliklerinin Ve Maliyetlerinin Karşılaştırılması