Journals / Politeknik Dergisi / 2009 / Cilt: 12 - Sayı: 1

Remote accessed control of a liquid filling system experimental set

Bir sıvı dolum tesisi deney setinin uzaktan erişimli kontrolü

Pages
35–41
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

So, the experimental set may be effectively used particularly by “automation” and “mechatronic” program students.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, an experimental set which is internet based and serves for technical education purposes has been presented.
📊
Key Findings & Data:The experimental system’s actuator position changes can be monitored online on the user interface.
💡
Conclusion & Impact:So, the experimental set may be effectively used particularly by “automation” and “mechatronic” program students.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, an experimental set which is internet based and serves for technical education purposes has been presented. LabVIEW graphical programming interface is used for controlling of the experimental set. It is possible to reach the system in any time and from anywhere. A program, created in LabVIEW, can be accessed for remote control of the system on the internet not only during the laboratory times but also whenever it is need. The experimental system’s actuator position changes can be monitored online on the user interface. The system has been developed for students of various disciplines. So, the experimental set may be effectively used particularly by “automation” and “mechatronic” program students.

Özet

Bu çalışmada, internet üzerinden kontrol edilebilen uzaktan erişimli ve teknik eğitim amaçlı bir deney düzeneği sunulmuştur. Sistemin kontrolünde, grafiksel programlama özelliğine sahip LabVIEW paket programı kullanılmıştır. Sistem, bir şişe dolum tesisindeki özellikleri barındıran bir yapıda tasarlanmıştır. Bu çalışma kapsamında geliştirilen pnömatik kontrollü sıvı dolum tesisi; öğrencilerin bireysel olarak kullanabileceği, sahip olduğu otomasyon teknolojilerinin öğretilmesine olanak sağlayacak şekilde ve her zaman ve her yerden ulaşılabilecek özellikte bir deney seti haline getirilmiştir. Uzaktan erişimli kullanıcılar, internet bağlantısı olan herhangi bir bilgisayardan deney düzeneğine bağlanabilmekte ve gerçek zamanlı olarak sistemi kontrol edebilmektedirler. Aynı zamanda, sistemdeki tüm değişkenlerin durum ve konum bilgilerini anlık olarak izleyebilmektedirler. Sistem, farklı disiplinlerde eğitim gören öğrencilerin anlayabileceği yapıda tasarlanmıştır. Bu deney seti özellikle “Otomasyon” ve “Mekatronik” teknik programlarının bazı laboratuvar uygulamalarında ortak bir düzenek olarak kullanılabilir.

🔖

Cite This Article

TAŞKIN, S., DEMETGÜL, M. (2009). Remote accessed control of a liquid filling system experimental set. Politeknik Dergisi, Cilt: 12 - Sayı: 1, 35–41. https://ajindex.com/articles/307449

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Çolak, İ., Demirbaş, Ş., Irmak, E., Bayındır, R., “Teknik Eğitimde İnternet Teknolojisinin Kullanımı”, I. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi (MTET 2005), İstanbul, (2005)
  2. Irmak, E., “Uzaktan Eğitim Amaçlı İnternet Tabanlı Laboratuvar Uygulaması”, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, (2007)
  3. Çolak İ., Demirbaş, Ş., Sefa İ., Irmak E., Kahraman H. T., “Remote controlling and monitoring of a HVAC system over the Internet”, Journal of Scientific & Industrial Research, Vol. 67, No. 9, 680-684 (2008)
  4. Taşkın, S., Tunçalp, K., Erdal, H., “Bir Mekatronik Sistem Ünitesinin Eğitim Amaçlı Uzaktan Erişimli Kontrolü”, I. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi (MTET 2005), İstanbul, (2005)
  5. Taşkın, S., Tunçalp, K., “Real Time and Remote Control by LabVIEW of MPS Modular Production System and Technical Education” Mechatronic Systems and Materials, Editor: Ewald Macha, Roland Pawliczek, Opole University of Technology, 103-111, Cracow, Poland, (2007)
  6. Taşkın, S., Tunçalp, K., Şeker, S., Sucu, M., “Endüstriyel Otomasyon Eğitimi İçin Uzaktan Erişimli Laboratuvar Uygulaması”, Otomatik Kontrol Ulusal Toplantısı (TOK’08), İstanbul Teknik Üniversitesi, 774-779 (2008)
  7. Çolak İ., Demirbaş Ş., Sağıroğlu Ş., Irmak E., “A Novel Web Based Laboratory for DC Motor Experiments”, Electrical Power System Research, in publish
  8. Irmak E., Bayındır R., Çolak İ., Sağıroğlu Ş., Bal G., “A Web Based Real Time Speed Control Experiment on Ultrasonic Motor for Educational Purposes”, 19th International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Italy, (2008)
  9. Erdemir, G., Kuzucuoğlu, A.E., “Web Tabanlı Robotik Eğitimi I. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi (MTET 2005), İstanbul, (2005)
  10. Alp, U., Ayaz, H., Karadeniz, M., Dikici, Ç., Bozma, H.I., “İnternet Üzerinden Uzaktan Robot Erişimi”, 11. Sinyal İşleme ve İletişim Uygulamaları Kurultayı (SIU 2003), İstanbul, (2003)
  11. Dormido, S., Vargas, H., Sánchez, J., Duro, N., Dormido, R., Canto, S.D., Esquembre, F., “Using Web-based laboratories for control engineering education”, International Conference on Engineering Education– ICEE 2007, Coimbra, Portugal, (2007)
  12. Yeung, K., Huang, J., “Development of the internet based control experiment”, Proceedings of the 40th IEEE Conference on Decision and Control, Orlando, Florida, 2809-2814 (2001)
  13. Morgan, J. A., Porter, J. R.: “Education through Comp