Journals / Politeknik Dergisi / 2017 / Cilt: 20 - Sayı: 4

Effects of Frequency and Bias Voltage on Dielectric Properties and Electric Modulus of Au/Bi4Ti3O12/n-Si (MFS) Capacitors

Pages
1002–1008
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental results showed that dielectric, modulus and conductivity parameters are strong functions of frequency and voltage especially in depletion and accumulation regions due to the existence of surface states (Nss), series resistance (Rs), interfacial polarization and interfacial layer.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, a metal-ferroelectric-semiconductor (MFS) type capacitor was fabricated and admittance measurements were held in a wide frequency range of 1 kHz-5 MHz at room temperature for the investigation of frequency and voltage dependence of complex dielectric constant, complex electric modulus and electrical conductivity of the MFS capacitor.
📊
Key Findings & Data:Bismuth titanate (Bi4Ti3O12) with high dielectric constant was used as interfacial ferroelectric material and the structure of MFS capacitor was obtained as Au/Bi4Ti3O12/n-Si.
💡
Conclusion & Impact:Experimental results showed that dielectric, modulus and conductivity parameters are strong functions of frequency and voltage especially in depletion and accumulation regions due to the existence of surface states (Nss), series resistance (Rs), interfacial polarization and interfacial layer.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:MFS capacitors · frequency and voltage dependence · surface states and interfacial polarization

Özet

In this work, a metal-ferroelectric-semiconductor (MFS) type capacitor was fabricated and admittance measurements were held in a wide frequency range of 1 kHz-5 MHz at room temperature for the investigation of frequency and voltage dependence of complex dielectric constant, complex electric modulus and electrical conductivity of the MFS capacitor. Bismuth titanate (Bi4Ti3O12) with high dielectric constant was used as interfacial ferroelectric material and the structure of MFS capacitor was obtained as Au/Bi4Ti3O12/n-Si. Experimental results showed that dielectric, modulus and conductivity parameters are strong functions of frequency and voltage especially in depletion and accumulation regions due to the existence of surface states (Nss), series resistance (Rs), interfacial polarization and interfacial layer. It was found that Rs of the structure and interfacial ferroelectric layer are efective in accumulation region whereas surface states (Nss) and interfacial polarization are efective in depletion region. Also the changes in dielectric, modulus and conductivity parameters become considerably high particularly at low frequencies due to high values of Rs and Nss. The observed anomalous peak in voltage dependent plots of capacitance and dielectric constant was atributed to the particular density distribution of Nss, Rs and minority carrier injection. Moreover, the value of conductivity at low and intermediate frequencies is almost independent of frequency thus low frequency data was used to extract d.c. conductivity. This work showed that the use of high-dielectric Bi4Ti3O12 as ferroelectric interfacial layer in a MFS capacitor is preferable due to high values of its dielectric constant compared with traditional insulator layer materials such as SiO2 and SnO2. Therefore, a MFS capacitor with Bi4Ti3O12 interfacial layer can store more energy thanks to its high dielectric constant.

🔖

Cite This Article

DURMUŞ, P., BİLKAN, Ç., YILDIRIM, M. (2017). Effects of Frequency and Bias Voltage on Dielectric Properties and Electric Modulus of Au/Bi4Ti3O12/n-Si (MFS) Capacitors. Politeknik Dergisi, Cilt: 20 - Sayı: 4, 1002–1008. https://ajindex.com/articles/307400

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Asar Y. Ş., Asar T., Altındal Ş. and Özçelik S., “Dielectric spectroscopy studies and ac electrical conductivity on (AuZn)/TiO2/p-GaAs (110) MIS structures”, Philosophical Magazine, 95: 2885-2898, (2015)
  2. Asar Y. Ş., Asar T., Altındal Ş. and Özçelik S., “Investigation of dielectric relaxation and ac electrical conductivity using impedance spectroscopy method in (AuZn)/TiO2/p-GaAs (110) schottky barrier diodes” Journal of Alloys and Compounds, 628: 442-449, (2015)
  3. Tanrıkulu E. E., Yıldız D. E., Günen A. and Altındal Ş., “Frequency and voltage dependence of electric and dielectric properties of Au/TiO2/n-4H-SiC (metal-insulator-semiconductor) type Schottky barrier diodes”, Physica Scripta, 90: 095801, (2015)
  4. Yıldırım M., Durmuş P. and Altındal Ş., “Analyses of temperature-dependent interface states, series resistances, and AC electrical conductivities of Al/p-Si and Al/Bi4Ti3O12/p-Si structures by using the admittance spectroscopy method”, Chinese Physics B, 22: 108502, (2013)
  5. Durmuş P. and Yıldırım M., “Influence of interfacial layer thickness on frequency dependent dielectric properties and electrical conductivity in Al/Bi4Ti3O12/p-Si structures”, Journal of Vacuum Science and Technology, 32: 061512 (2014)
  6. Reddy V. R., Manjunath V., Janardhanam V., Kil Y. H. and Choi C. J., “Electrical Properties and Current Transport Mechanisms of the Au/n-GaN Schottky Structure with Solution-Processed High-k BaTiO3 Interlayer”, Journal of Electronic Materials, 43: 3499-3507 (2014)
  7. Kaya A., Alialy S., Demirezen S., Balbaşı M., Yerişkin S. A. and Aytimur A., “The investigation of dielectric properties and ac conductivity of Au/GO-doped PrBaCoO nanoceramic/n-Si capacitors using impedance spectroscopy method”, Ceramics International, 42: 3322-3329, (2016)
  8. Yerişkin S. A., Balbaşı M. and Tataroğlu A., “Frequency and voltage dependence of dielectric properties, complex electric modulus, and electrical conductivity in Au/7% graphene doped-PVA/n-Si (MPS) structures”, Journal of Applied Polymer Science, 133: 43827, (2016)
  9. Chu L. K., Chiang T. H., Lin T. D., Lee Y. J., Chu R. L., Kwo J. and Hong M., “Ge metal-oxide-semiconductor devices with Al2O3/Ga2O3(Gd2O3) as gate dielectric”, Microelectronic Engineering, 91: 89-92 (2012)
  10. Yıldırım M., “Current conduction and steady-state photoconductivity in photodiodes with bismuth titanate interlayer”, Thin Solid Films, 615: 300-304, (2016)
  11. Jayalakshmi M. and Balasubramanian K., “Simple C