SavedAdd your journal

Journals / Politeknik Dergisi / 2000 / Cilt: 3 - Sayı: 1

Investigation of the effects of switching in industrial installation

Anahtarlamanın endüstriyel bir tesisteki etkilerinin incelenmesi

İlhan KOŞALAY
ERCAN NURCAN YILMAZ
Pages
31–38
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this work all the models of the system elements are introduced before starting the transients analysis and results are discussed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, power system transients are introduced by using computer aided methods, switching transients of a sample industrial installation is analyzed.
📊
Key Findings & Data:On-off operation is done by using high voltage switchgear in the system.
💡
Conclusion & Impact:In this work all the models of the system elements are introduced before starting the transients analysis and results are discussed.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this paper, power system transients are introduced by using computer aided methods, switching transients of a sample industrial installation is analyzed. On-off operation is done by using high voltage switchgear in the system. In this work all the models of the system elements are introduced before starting the transients analysis and results are discussed.

Özet

Bu makalede açma kapama işlemlerinden doğan geçici olaylar ve etkileri, örnek bir sanayi tesisi için, bilgisayar destekli olarak incelenmiştir. Sistemde açma kapama işleminin gerçekleşmesi kesiciler yardımıyla olmaktadır. Çalışmada örnek alınan sanayi tesisinin geçici olay analizinin yapılabilmesi için, tesiste bulunan elektriksel elemanlarının simülasyonda kullanılan modelleri tanıtılmış ve elde edilen sonuçlar tartışılmıştır

🔖

Cite This Article

KOŞALAY, İ., YILMAZ, E. N. (2000). Investigation of the effects of switching in industrial installation. Politeknik Dergisi, Cilt: 3 - Sayı: 1, 31–38. https://ajindex.com/articles/307327

References (1)

  1. Greenwood A., "Electrical transients in power systems", by Prentice-Hall inc., USA 1971 2) Pavh D., Volcker O., Bizjak G., Zunko P., "Calculation of transient phenomena", IEEE/NTUA Athens power tech. conference, Athens, sept., pp 5-8, Greece 1993 3) Adibi M.M., Kayka R.J., " Power system restoration issues ", IEEE Computer application in power, vol:4, no:2, pp. 19-24, April 1991 4) Adibi M.M, Alexander R.W., Avramovic B., "Overvoltage control during restoration", IEEE Transaction on power systems, vol:7, no:4, now., pp. 1464-1470, 1992 5) Werlen K., Glavitsch H., "Computation of transients by paralel processing", IEEE Transaction on power delivery, vol:8, no:3, July, pp. 1579-1585, 1993 6) Pratico P.E., Eitzmann M. A., "A Micro computer-based data acquisition system for transient network analyzer operation", IEEE Transaction on power systems, vol:9, no:2, May,pp.812-819, 1994 7) Saraiva J.T., Miranda V., "Impact on some planning decisions from a fuzzy modelling of power systems", IEEE Transactions on power systems, vol:9, no:2, May, pp. 819-824, 1994 8) Singh H., Abur A., "Multi-port equivalencing of externel systems for simulation of switching transients", IEEE Transaction on power del., vol: 10, no: 1,Jan., pp. 37-380, 1995 9) Soysal 0., Transformatör sargılarında oluşan hızlı değişimli geçici olayların incelenmesi ve enerji iletim sistemlerinin modellenmesinde yeni bir yaklaşım, Doktora tezi, İ.T.Ü. ofset baskı atel., İstanbul, 1985 10) Koşalay, İ., Enerji sistemlerinde anahtarlama geçici olaylarının incelenmesi, Y.L. Tezi, İ.Ü., İstanbul, 1995.