Journals / Politeknik Dergisi / 2010 / Cilt: 13 - Sayı: 3

Determination of the Bending Strength and Modulus of Elasticity of Solid Wood and Laminated Veneer Lumber

Masif ve Lamine Edilmiş Ağaç Malzemelerde Eğilme Direnci ve Elastikiyet Modülünün Belirlenmesi

Pages
183–190
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In conclusion, it can be said that the laminated materials which has a number of technical and economical advantages could be utilized instead of solid wood material as an alternative structural material and could be used in production of the furniture frames.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, bending strength (MOR) and modulus of elasticity (MOE) of the laminated veneer lumber (LVL) and solid wood materials which are constructed of different wood species were determined.
📊
Key Findings & Data:In static bending tests, the laminated materials perpendicular to the glue line were yielded higher results than the laminated materials parallel to the glue line, in opposition, in the modulus of elasticity values, the laminated materials parallel to the glue line have been given higher results than the laminated materials perpendicular to the glue line.
💡
Conclusion & Impact:In conclusion, it can be said that the laminated materials which has a number of technical and economical advantages could be utilized instead of solid wood material as an alternative structural material and could be used in production of the furniture frames.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Eğilme direnci · elastikiyet modülü · Doğu kayını

Abstract

In this study, bending strength (MOR) and modulus of elasticity (MOE) of the laminated veneer lumber (LVL) and solid wood materials which are constructed of different wood species were determined. Solid wood and LVL constructed of oriental beech (Fagus orientalis Lipsky), scotch pine (Pinus sylvestris Lipsky) and poplar (Populus nigra) were tested for determining bending strength and modulus of elasticity. Furthermore, bending quality values of the materials were calculated. As a result; the highest bending strength and modulus of elasticity were obtained with beech in solid form, and the lowest one with poplar in solid form. In static bending tests, the laminated materials perpendicular to the glue line were yielded higher results than the laminated materials parallel to the glue line, in opposition, in the modulus of elasticity values, the laminated materials parallel to the glue line have been given higher results than the laminated materials perpendicular to the glue line. It was observed that the bending quality values of the materials decrease after the lamination process. In conclusion, it can be said that the laminated materials which has a number of technical and economical advantages could be utilized instead of solid wood material as an alternative structural material and could be used in production of the furniture frames.

Özet

Bu çalışmada, farklı ağaç türlerinden hazırlanan lamine edilmiş ve masif ağaç malzemelerin eğilme direnci ve elastikiyet modülü belirlenmiştir. Doğu kayını (Fagus orientalis Lipsky), sarıçam (Pinus sylvestris Lipsky) ve kavak (Populus nigra) odunlarından hazırlanan örneklere eğilme direnci ve elastikiyet modülü deneyleri yapılmıştır. Çalışmada ayrıca lamine malzemelerin eğilme kalitesi değerleri de hesaplanmıştır. Sonuç olarak; en yüksek eğilme direnci ve elastikiyet modülü Doğu kayınında, en düşük ise kavakta elde edilmiştir. Eğilme direnci, tutkal hattına dik lamine malzemelerde, tutkal hattına paralel lamine malzemelerden daha yüksek bulunmuş, elastikiyet modülü değerlerinde ise bunun tersi bir sonuç elde edilmiştir. Eğilme kalitesi değerleri, laminasyon işleminde düşük çıkmıştır. Buna göre, teknik ve ekonomik yönden birçok avantajları bulunan lamine malzemelerin masif malzemelere alternatif yapı malzemesi olarak ve çerçeve konstrüksiyonlu mobilya üretiminde kullanılabileceği söylenebilir.

🔖

Cite This Article

KASAL, A., EFE, H. H., DİZEL, T. (2010). Determination of the Bending Strength and Modulus of Elasticity of Solid Wood and Laminated Veneer Lumber. Politeknik Dergisi, Cilt: 13 - Sayı: 3, 183–190. https://ajindex.com/articles/307221