Journals / Politeknik Dergisi / 2014 / Cilt: 17 - Sayı: 1

Thermal and Compressive Strength Properties of Sepiolite Substituted Autoclaved Aerated Concrete

Sepiyolit İkame Edilmiş Gazbetonun Isıl ve Basınç Dayanım Özellikleri

Pages
43–47
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, increasing the rate of sepiolite in aerated concrete decreases the compressive strength and increases the thermal conductivity.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aerated concrete is a lightweight concrete which has porous structure.
📊
Key Findings & Data:In this study, effects of usage of sepioliteas a raw material instead of quartzite on the thermal and compressive strength properties of aerated concrete were investigated.G2/04 class aerated concrete, which has been commercially produced as a wall component, has been focused.
💡
Conclusion & Impact:As a result, increasing the rate of sepiolite in aerated concrete decreases the compressive strength and increases the thermal conductivity.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Aerated concrete is a lightweight concrete which has porous structure. In this study, effects of usage of sepioliteas a raw material instead of quartzite on the thermal and compressive strength properties of aerated concrete were investigated.G2/04 class aerated concrete, which has been commercially produced as a wall component, has been focused. Aerated concrete samples have been prepared by substitution of sepiolite instead of quartzite in %5, %10, %15, %20 and %25. Sepiolite has been provided from Eskişehir mine field. After 4 hours cure at 60ºC, samples moved to treat in autoklave in the temperature of 180ºC and pressure at 11 bar for 6.5 hours. Thermal conductivity and compressive strength properties of samples were determined. As a result, increasing the rate of sepiolite in aerated concrete decreases the compressive strength and increases the thermal conductivity.

Özet

Gazbeton gözenekli hafif betondur. Bu araştırmada, Sepiyolitin gazbeton üretiminde hammadde olarak kullanılan kuvarsit yerine ikamesinin gazbetonun ısıl ve basınç dayanım özelliklerine etkisi araştırılmıştır. Araştırmada, duvar elamanı olarak kullanılan ve ticari olarak üretimi yapılan G2/04 sınıfı gazbeton üretimi esas alınmıştır. Eskişehir Sivrihisar maden sahasından alınan Sepiyolitin, hammadde olarak kullanılan kuvarsit yerine %5, %10, %15, %20 ve %25 oranlarında ikame edilerek gazbeton örnekleri üretilmiştir. Üretilen örnekler 60 ºC sıcaklıkta 4 saat kürde bekletildikten sonra 180 ºC'de 11 bar basınçta 6,5 saat otoklavda küre tabi tutulmuştur. Üretilen örneklerin basınç dayanımı ve ısıl iletkenlik özellikleri belirlenmiştir. Sonuç olarak sepiyolit oranının arttırılması sonucu basınç dayanımında azalma olurken ısıl iletimde iyileşme gözlenmiştir.

🔖

Cite This Article

SAVAŞ, M., DEMİR, İ., GÜZELKÜÇÜKc, S., ŞENGÜL, Ç. G., YAPRAK, H. E. (2014). Thermal and Compressive Strength Properties of Sepiolite Substituted Autoclaved Aerated Concrete. Politeknik Dergisi, Cilt: 17 - Sayı: 1, 43–47. https://ajindex.com/articles/307181

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. TS EN 771-4, Kâgir Birimler - Özellikler - Bölüm 4: Gazbeton Kâgir Birimler, Türk Standartları Enstitüsü, Ankara,2011. TS EN 12602, Önyapımlı Donatılı Gazbeton Yapı Elemanları, Türk Standartları Enstitüsü, Ankara,2011.
  2. Kömürlü, R., Önel, H., Gazbeton Yapı Ürünlerinin Konutlarda Kullanımı, YTÜ Mimarlık Fakültesi E- Dergisi, Cilt 2, Sayı 3, Syf 145- 158, İstanbul,2007.
  3. Yılmaz, Y., Eskişehir Yöresi Sepiyoliti' Nin, Termal Özelliklerinin İncelenmesi, Yüksek Lisans Tezi, Anadolu Üniversitesi,
  4. Fen Bilimleri Enstitüsü, Eskişehir, 2007.
  5. DPT, Lületası, Tabakalı Sepiyolit, Atapulgit (Paligorskit), Devlet Planlama Teşkilatı VII. Beş Yıllık Kalkınma Planı Özel İhtisas Komisyonu, Diğer Endüstri Mineralleri Çalışma Grubu Raporu, Cilt 1, Yayın No: DPT 2421-ÖK: 480 Ankara, 1996.
  6. Sabah, E. Ve Çelik, M. S., Sepiyolit: Özellikleri ve Kullanım Alanları, 3.Endustrryel Hammaddeler Sempozyumu,İzmir,1999.
  7. Borhan, B., Ytong El Kitabı-1, Teknik Yayınları No:1,İstanbul,1987 TS EN 679, Gazbeton - Basınç Dayanımı Tayini, Türk Standartları Enstitüsü, Ankara,2008. TS ISO 8301, Isı Yalıtımı - Kararlı Halde Isıl Direncin Ve İlgili Özelliklerin Tayini - Isı Akış Tayini İçin Metotlar, Ankara,1991.
  8. Kavas, T., Sabah, T., Çelik, M.S., Structural Properties of Sepiolite-Reinforced Cement Composite, Cement and Concrete Resarch, 2004.