Journals / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 4

Preparation and Characterisation of Biochar from Hazelnut Shell and Its Adsorption Properties for Methylene Blue Dye

Pages
765–776
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The pseudo-first-order and pseudo-second-order kinetic models were applied to the experimental data and thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:One of the major pollutants in water resources are organic dyes that are widely used by different industries.
📊
Key Findings & Data:Adsorption is one of the most popular methods because of its high purification yield and known as a cost effective process if the sorbent is inexpensive.
💡
Conclusion & Impact:The pseudo-first-order and pseudo-second-order kinetic models were applied to the experimental data and thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Adsorption · methylene blue · hazelnut shell

Abstract

One of the major pollutants in water resources are organic dyes that are widely used by different industries. Methylene blue (MB) is one of them which is quite harmful for aquatic life. This pollutant must be removed with proper methods. Adsorption is one of the most popular methods because of its high purification yield and known as a cost effective process if the sorbent is inexpensive. In this study, biochar which is used as an adsorbent has been produced from hazelnut shells used as the raw material. Chemical, thermal and surface characteristics of raw hazelnut shell were investigated by FT-IR, TG/DTG, SEM and elemental analysis. Biochar characteristics were determined by FT-IR, BET and SEM analysis. The effect of different adsorption parameters such as pH, initial dye concentration, contact time, adsorbent dosage and temperature on the adsorption of MB onto hazelnut shell char were examined in batch experiments. The equilibrium of adsorption was modeled using Langmuir and Freundlich isotherm models. The maximum adsorption yield of MB was found to be 83% at pH 4.0, adsorbent dosage of 4 g/L, contact time of 300 min., initial dye concentration of 15 mg/L and temperature of 45 oC. In addition, the Freundlich isotherm was found to be the best fitting isotherm model for the adsorption process. The pseudo-first-order and pseudo-second-order kinetic models were applied to the experimental data and thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined.

Özet

One of the major pollutants in water resources are organic dyes that are widely used by different industries. Methylene blue (MB) is one of them which is quite harmful for aquatic life. This pollutant must be removed with proper methods. Adsorption is one of the most popular methods because of its high purification yield and known as a cost effective process if the sorbent is inexpensive. In this study, biochar which is used as an adsorbent has been produced from hazelnut shells used as the raw material. Chemical, thermal and surface characteristics of raw hazelnut shell were investigated by FT-IR, TG/DTG, SEM and elemental analysis. Biochar characteristics were determined by FT-IR, BET and SEM analysis. The effect of different adsorption parameters such as pH, initial dye concentration, contact time, adsorbent dosage and temperature on the adsorption of MB onto hazelnut shell char were examined in batch experiments. The equilibrium of adsorption was modeled using Langmuir and Freundlich isotherm models. The maximum adsorption yield of MB was found to be 83% at pH 4.0, adsorbent dosage of 4 g/L, contact time of 300 min., initial dye concentration of 15 mg/L and temperature of 45 oC. In addition, the Freundlich isotherm was found to be the best fitting isotherm model for the adsorption process. The pseudo-first-order and pseudo-second-order kinetic models were applied to the experimental data and thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined.

🔖

Cite This Article

KAYA, N., YILDIZ, Z., CEYLAN, S. (2018). Preparation and Characterisation of Biochar from Hazelnut Shell and Its Adsorption Properties for Methylene Blue Dye. Politeknik Dergisi, Cilt: 21 - Sayı: 4, 765–776. https://ajindex.com/articles/307148

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Çalışkan M., Değirmenci M. and Çiner F. "Kot boyama tekstil atıksuyunda kalıcı KOİ’nin belirlenmesi", DEÜ Fen ve Mühendislik Dergisi, 4(1):1-9, (2002)
  2. Poon C.S., Huang Q. and Fung P.C. "Degradation kinetics of cuprophenyl yellow RL by UV/H2O2/Ultrasonication (US) process in aqueous solution", Chemosphere, 38:1005-1014, (1999)
  3. Chakraborty S., Chowdhury S. and Saha P., “Adsorption of crystal violet from aqueous solution onto NaOH-modified rice husk”, Carbohydrate Polymers, 86:1533–1541, (2011)
  4. Rafatullah M., Sulaiman O., Hashim R and Ahmad A., “Adsorption of methylene blue on low-cost adsorbents: A review”, Journal of Hazardous Materials, 177:70-80, (2010)
  5. Mohammadi A. and Karimi A.A., “Methylene blue removal using surface-modified TiO2 nanoparticles: A comparative study on adsorption and photocatalytic degradation”, J. Water Environ. Nanotechnol., 2(2):118-128, (2017)
  6. Gaouar-Yadi M., Tizaoui K., Gaouar-Benyelles N. and Benguella B., “Efficient and eco-friendly adsorption using low-cost natural sorbents in waste water treatment”, Indian Journal of Chemical Technology, 23:204-209, (2016)
  7. Demiral İ. and Aydın Şamdan C., “Preparation and characterisation of activated carbon from pumpkin seed shell using H3PO4”, Anadolu University Journal of Science and Technology A-Applied Sciences and Engineering, 17(1):125-138, (2016)
  8. Sharma S.K., “Green Chemistry for Dyes Removal from Waste Water: Research Trends and Applications”, Wiley, India, (2015)
  9. Aygün A., Yenisoy-Karakaş S. and Duman I., “Production of granular activated carbon from fruit stones and nutshells and evaluation of their physical, chemical and adsorption properties”, Microporous and Mesoporous Materials, 66:189-195, (2003)
  10. Alade A.O., Amuda O.S., Afolabi A.O. and Adelowo F.E., “Adsorption of acenaphthene unto activated carbon produced from agricultural wastes”, Journal of Environmental Science and Technology, 5(4):192-209, (2012)
  11. Savova D., Apak E., Ekinci E., Yardim F., Petrov N., Budinova T., Razvigorova M. and Minkova V., “Biomass conversion to carbon adsorbents and gas”, Biomass and Bioenergy, 21:133-142, (2001)
  12. Kim J.W., Sohn M.H., Kim D.S., Sohn S.M. and Kwon Y.S., “Production of granular activated carbon from waste walnut shell and its adsorption characteristics for Cu2+ ion”, Journal of Hazardous Materials, 85:301-315, (2001)
  13. Saha P., Chowdhury S., Gupta S. and Kumar I., “Insight into adsorption equilibrium, kinetics and thermodyna