Journals / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 3

Impact of Accelerated UV Aging on the Surface Adhesion Strength of Water-Based Varnish Applied and Heat-Treated (ThermoWood) Some Wood Species

Isıl İşlem Görmüş (ThermoWood) ve Su Bazlı Vernik Uygulanmış Bazı Ağaç Türlerinde Hızlandırılmış UV Yaşlandırmanın Yüzeye Yapışma Direncine Etkisi

Pages
611–619
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to these results obtained; It had been determined that on the surface of water-based single and double component varnishes applied and heat treated wood showed a decrease in the adhesion value after aging.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was performed to determine the impact of accelerated UV aging on surface adhesion to some wood species treated with heat treated (ThermoWood) and water based varnish.
📊
Key Findings & Data:For this purpose, heat treatment was carried out at 190oC for 2 hours and 212oC for 1 and 2 hours according to the ThermoWood method for the Scots pine (Pinus sylvestris Lipsky), European oak (Quercus petreae Liebl.) and Oriental beech (Fagus orientalis Lipsky).
💡
Conclusion & Impact:According to these results obtained; It had been determined that on the surface of water-based single and double component varnishes applied and heat treated wood showed a decrease in the adhesion value after aging.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Isıl işlem · su-bazlı vernik · yüzeye yapışma direnci

Abstract

This study was performed to determine the impact of accelerated UV aging on surface adhesion to some wood species treated with heat treated (ThermoWood) and water based varnish. For this purpose, heat treatment was carried out at 190oC for 2 hours and 212oC for 1 and 2 hours according to the ThermoWood method for the Scots pine (Pinus sylvestris Lipsky), European oak (Quercus petreae Liebl.) and Oriental beech (Fagus orientalis Lipsky). Water based single and double component varnishes had been applied to the surfaces of the obtained materials. The UV-A was then aged for 144, 288 and 432 hours (ASTM G 154-06) on a UV aging device with 340 nm fluorescent lamps. After these periods the surface adhesion resistance was measured. According to these results obtained; It had been determined that on the surface of water-based single and double component varnishes applied and heat treated wood showed a decrease in the adhesion value after aging.

Özet

Bu çalışmanın amacı, ısıl işlem görmüş (ThermoWood) ve su bazlı vernik uygulanmış bazı ağaç türlerinde hızlandırılmış UV yaşlandırmanın yüzeye yapışma direncine etkisini belirlemektir. Bu amaçla Sarıçam (Pinus sylvestris Lipsky), Sapsız meşe (Quercus petreae Liebl.) ve Doğu kayını (Fagus orientalis Lipsky) odunlarına, ThermoWood metoduna göre 190oC’de 2 saat ve 212oC’de 1 ve 2 saat süreler ile ısıl işlem uygulanmıştır. Elde edilen malzemelerin yüzeylerine su bazlı tek ve çift bileşenli vernikler tatbik edilmiştir. Daha sonra UV-A 340 nm flouresan lambalarının bulunduğu UV yaşlandırma cihazında 144, 288 ve 432 saat süre boyunca (ASTM G 154-06) yaşlandırılmaya maruz bırakılmıştır. Bu periyot sonralarında yüzeye yapışma dirençleri ölçülmüştür. Elde edilen bu sonuçlara göre; kullanılan su bazlı tek ve çift bileşenli verniklerin ısıl işlem görmüş ağaç malzeme yüzeylerinde, yaşlandırma sonralarında yüzeye yapışma direnci değerinde azalma gösterdiği belirlenmiştir.

🔖

Cite This Article

AYATA, Ü., ÇAKICIER, N. (2018). Impact of Accelerated UV Aging on the Surface Adhesion Strength of Water-Based Varnish Applied and Heat-Treated (ThermoWood) Some Wood Species. Politeknik Dergisi, Cilt: 21 - Sayı: 3, 611–619. https://ajindex.com/articles/307137

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Jaémsaé S., Ahola P., Vitaniem P., “Long-term natural weathering of coated ThermoWood”, Pigment & Resin Technology, 29(2): 68-74, (2000)
  2. Miklečić J., Jirouš-Rajković V., Antonović A, and Španić N., “Discolouration of thermally modified wood during simulated indoor sunlight exposure, thermal wood colour & sunlight, BioResources, 6(1): 434-446, (2011)
  3. Örs Y., Keskin H., “Ağaç malzeme teknolojisi, Ders Kitabı”, Gazi Üniversitesi Yayın No: 2000/352, Gazi Yayıncılık, Ankara, (2008)
  4. TS 1476, “Odunda fiziksel ve mekanik özelliklerin tayini için homojen meşçerelerden numune ağacı ve laboratuvar numunesi alınması”, T.S.E., Ankara, (1984)
  5. TS 642 ISO 554, Kondisyonlama ve /veya deney için standart atmosferler - özellikler, T.S.E., Ankara, (1997)
  6. Anonymous, “ThermoWood Handbook”, Finnish ThermoWood Association, Helsinki-Finland, (2003)
  7. Ayata Ü., “Isıl işlem görmüş (ThermoWood) bazı ağaç türlerinde kullanılan su-bazlı vernik katmanlarının hızlandırılmış UV yaşlandırma etkisine karşı direncinin belirlenmesi”, Doktora Tezi, Düzce Üniversitesi, Fen Bilimleri Enstitüsü, Orman Endüstri Mühendisliği Anabilim Dalı, Düzce, (2014)
  8. ASTM G 154-06, “Standard practice for operating fluorescent light apparatus for UV exposure of nonmetallic materials”, American Society for Testing and Materials, USA, 2-8, (2006)
  9. ASTM D 1644-01, “Standard test methods for nonvolatile content of varnishes”, American Society for Testing and Materials”, West Conshohocken, Pennsylvania, USA, (2006)
  10. TS 5723, “Ahşap koruma-emprenye maddesi nüfuz derinliğinin tayini”, Türk Standartları Enstitüsü, Ankara, (1988)
  11. Atar M., Keskin H., Yavuzcan H.G., “Varnish layer hardness of oriental beech (Fagus orientalis Lipsky) wood As affected by impregnation and color bleaching", Journal of Coatings Technology (JCT), 1/3: 219-225, (2004)
  12. Bozkurt Y., Göker Y., Erdin N., “Emprenye Tekniği”, İ.Ü. Orman Fakültesi Yayınları, İstanbul, 3779 (425): 125 ve 429, (1993)
  13. ASTM D 6132, “Standard test method for nondestructive measurement of dry film thickness of applied organic coatings using an ultrasonic gage”, American Society for Testing and Materials, (2008)
  14. ASTM D 4541, “Standard Test method for pull-off strength of coatings using portable adhesion testers”, American Society for Testing and Materials, 12-15, (1995)
  15. Budakçı M., “Pnömatik adezyon deney cihazı tasarımı ve üretimi (Doktora tezinden üretilmiştir)”, Gazi Üniversitesi Teknik Eğitim Fakülte