Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 3

Confirmation of Johnson-Cook Model Parameters for Nimonic 80A alloy by Finite Element Method

Pages
625–632
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The result showed that accuracy of the Johnson-Cook parameters for Nimonic 80A superalloy was verified with FEM.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nimonic 80A superalloy is frequently used due to its high creep resistance, oxidation resistance and high resistance to high temperature corrosion.
📊
Key Findings & Data:In this study, primarily, quasi-static compression tests were performed for 10-3, 10-2 and 10-1 s-1 strain rates at room temperature.
💡
Conclusion & Impact:The result showed that accuracy of the Johnson-Cook parameters for Nimonic 80A superalloy was verified with FEM.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Nimonic 80A · johnson-cook parameters · finite element method

Abstract

Nimonic 80A superalloy is frequently used due to its high creep resistance, oxidation resistance and high resistance to high temperature corrosion. On the other hand, due to compatibility of simulation of plastic deformation processes, Johnson-Cook model is chosen among the materials models such as Zerille Armstrong, Bordner Partom, Steinberg-Guinan etc. In this study, primarily, quasi-static compression tests were performed for 10-3, 10-2 and 10-1 s-1 strain rates at room temperature. Secondly, dynamic compression tests were secondly conducted at high strain rates ranging from 370 to 954 s-1 using the Split Hopkinson Pressure Bar (SHPB) apparatus. Then, the compression tests were conducted at a temperature level from 24~200 °C at the reference strain rate. Johnson-Cook model parameters of Nimonic 80A were determined by analyzing the data obtained from the tests. Lastly, the compression simulations with finite element method (FEM) were performed in ANSYS Workbench to confirm the accuracy of the parameters. In the light of the results, it was determined that there is an average of %3.23 deviation between the experimental and the simulation values. The result showed that accuracy of the Johnson-Cook parameters for Nimonic 80A superalloy was verified with FEM.

Özet

Nimonic 80A superalloy is frequently used due to its high creep resistance, oxidation resistance and high resistance to high temperature corrosion. On the other hand, due to compatibility of simulation of plastic deformation processes, Johnson-Cook model is chosen among the materials models such as Zerille Armstrong, Bordner Partom, Steinberg-Guinan etc. In this study, primarily, quasi-static compression tests were performed for 10-3, 10-2 and 10-1 s-1 strain rates at room temperature. Secondly, dynamic compression tests were secondly conducted at high strain rates ranging from 370 to 954 s-1 using the Split Hopkinson Pressure Bar (SHPB) apparatus. Then, the compression tests were conducted at a temperature level from 24~200 °C at the reference strain rate. Johnson-Cook model parameters of Nimonic 80A were determined by analyzing the data obtained from the tests. Lastly, the compression simulations with finite element method (FEM) were performed in ANSYS Workbench to confirm the accuracy of the parameters. In the light of the results, it was determined that there is an average of %3.23 deviation between the experimental and the simulation values. The result showed that accuracy of the Johnson-Cook parameters for Nimonic 80A superalloy was verified with FEM.

🔖

Cite This Article

KORKMAZ, M. E., GÜNAY, M. (2020). Confirmation of Johnson-Cook Model Parameters for Nimonic 80A alloy by Finite Element Method. Politeknik Dergisi, Cilt: 23 - Sayı: 3, 625–632. https://ajindex.com/articles/307066

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Kim, D. K., Kim, D. Y., Ryu, S. H., and Kim, D. J., "Application of nimonic 80A to the hot forging of an exhaust valve head", Journal Of Materials Processing Technology, 113 (1–3): 148–152 (2001)
  2. Zhu, Y., Zhimin, Y., and Jiangpin, X., "Microstructural mapping in closed die forging process of superalloy Nimonic 80a valve head", Journal Of Alloys And Compounds, 509 (20): 6106–6112 (2011)
  3. Quan, G., Pan, J., and Wang, X., "Prediction of the Hot Compressive Deformation Behavior for Superalloy Nimonic 80A by BP-ANN Model", Applied Sciences, 6 (3): 66 (2016)
  4. Günay, M., Korkmaz, M. E., and Yaşar, N., "Finite element modeling of tool stresses on ceramic tools in hard turning", Mechanika, 23 (3) (3): 432–440 (2017)
  5. Korkmaz, M. E. and Günay, M., "Finite Element Modelling of Cutting Forces and Power Consumption in Turning of AISI 420 Martensitic Stainless Steel", Arabian Journal For Science And Engineering, 43 (9): 4863–4870 (2018)
  6. Gok, K., "Development of three-dimensional finite element model to calculate the turning processing parameters in turning operations", Measurement, 75: 57–68 (2015)
  7. Parida, A. K. and Maity, K., "Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718", Measurement, 133: 361–369 (2019)
  8. Jain, A., Khanna, N., and Bajpai, V., "FE simulation of machining of Ti-54M titanium alloy for industry relevant outcomes", Measurement, 129: 268–276 (2018)
  9. Parida, A. K. and Maity, K., "Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis", Engineering Science And Technology, An International Journal, 20 (2): 687–693 (2017)
  10. Asif. M, M., Shrikrishana, K. A., and Sathiya, P., "Finite element modelling and characterization of friction welding on UNS S31803 duplex stainless steel joints", Engineering Science And Technology, An International Journal, 18 (4): 704–712 (2015)
  11. Parida, A. K. and Maity, K., "Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation", Engineering Science And Technology, An International Journal, 21 (3): 364–370 (2018)
  12. Şerban, D. A., Marsavina, L., Rusu, L., and Negru, R., "Numerical study of the behavior of magnesium alloy AM50 in tensile and torsional loadings", Archive Of Applied Mechanics, (1): 1–7 (2018)
  13. Dorogoy, A. and Rittel, D., "Determination of the johnson-cook material parameters using the SCS specimen", Experimental Mechanics, 49 (6):