Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 2

Investigation of the Tribological and Mechanical Properties of Boron Steels in Terms of Potential Usage in Agricultural Applications

Pages
431–438
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is observed that the hardness of the specimen is slightly decreased but impact toughness is increased for the quenched and cryo treated specimen in comparison to conventionally heat-treated specimen.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Boron steels are increasingly used material especially in industrial applications requiring high wear resistance.
📊
Key Findings & Data:In this study, the effect of cryogenic treatment on 30MnB5 boron steel used in agricultural mechanization is investigated in terms of the tribological and mechanical properties.
💡
Conclusion & Impact:It is observed that the hardness of the specimen is slightly decreased but impact toughness is increased for the quenched and cryo treated specimen in comparison to conventionally heat-treated specimen.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Boron steel · 30MnB5 · quenching

Abstract

Boron steels are increasingly used material especially in industrial applications requiring high wear resistance. The main area of usage of this type of steel is tillage tools which are working in harsh conditions. In addition to the abrasive wear resistance, impact toughness is also required properties. In this study, the effect of cryogenic treatment on 30MnB5 boron steel used in agricultural mechanization is investigated in terms of the tribological and mechanical properties. Charpy impact test, the hardness and the abrasive wear tests are performed on untreated, heat treated and cryogenically treated of 30MnB5 steel. It is observed that the hardness of the specimen is slightly decreased but impact toughness is increased for the quenched and cryo treated specimen in comparison to conventionally heat-treated specimen.

Özet

The usage amounts of boron steels are increasing gradually, especially in industrial applications requiring high wear resistance. One of the usages of this type of steel is tillage tools, which are working in harsh conditions. Prominent desired properties for materials that face the soil in agricultural machining are hardness, abrasive wear resistance, impact toughness. In this study, the tribological and mechanical properties of 30MnB5 boron steel used in agricultural mechanization are investigated, applying three different heat treatment procedures. The impact strength, hardness and abrasive wear resistance of the as supplied, quenched and quenched cryo treated-tempered samples are evaluated. It was observed that the quenching is an essential heat treatment for usage of boron steel in agricultural field. The tempering reduces hardness of the specimen and cyrogenic treatment and tempering increased the impact toughness.

🔖

Cite This Article

BOZKURT, F., ÇAKIR, F. H., ER, Ü. (2021). Investigation of the Tribological and Mechanical Properties of Boron Steels in Terms of Potential Usage in Agricultural Applications. Politeknik Dergisi, Cilt: 24 - Sayı: 2, 431–438. https://ajindex.com/articles/307012

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Misra A., Finnie I., “A Review of the Abrasive Wear of Metals”, Journal of Engineering Materials and Technology, 104(2): 94–101, (1982
  2. Er Ü., Par B., “Wear of plowshare components in SAE 950C steel surface hardened by powder boriding”, Wear, 261( 3–4): 251–255, (2006
  3. Er B., “Abrasive Wear Behaviour of Hardened AISI 51B60H Boron Steel”. ISAS 2018 – 1st International Symposium on Innovative Approaches in Scientific Studies, Antalya, Turkey, 297-301, (2018
  4. Yu H. J., Bhole S. D., “Development of a prototype abrasive wear tester for tillage tool materials”, Tribology International, 23(5): 309–316, (1990
  5. Er Ü., “The abrasive wear behaviour of boron steels”, Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 17(2): 59–70, (2004
  6. Çakır F. H., Çelik O. N., “Effect of Isothermal Bainitic Quenching on Rail Steel Impact Strength and Wear Resistance”, Metal Science and Heat Treatment, 59(5–6): 289–293, (2017
  7. Pyndak V. I., Novikov A. E., “Tribotechnical and Energy Assessment of Parts of Working Members of Cultivating Machines After Carburizing and Laser Hardening”, Metal Science and Heat Treatment, 58(3–4): 226–230, (2016
  8. Foley A. G., Lawton P.J., Barker A.W., McLees V.A., “The use of alumina ceramic to reduce wear of soil-engaging components”, Journal of Agricultural Engineering Research, 30: 37–46, (1984
  9. Gupta A.K., Jesudas D.M., Das P.K., Basu K., “Performance Evaluation of Different Types of Steel for Duck Foot Sweep Application”, Biosystems Engineering, 88(1): 63–74, (2004
  10. Quirke S., Scheffler O., Allen C., “An evaluation of the wear behaviour of metallic materials subjected to soil abrasion”, Soil and Tillage Research, 11(1): 27–42, (1988
  11. Arıkan M. M., Başman G., “Otomotiv endüstrisi için yeni çelik ürünler ve özellikleri”, Uluslararası Demir-Çelik Sempozyumu, Karadeniz Ereğli Zonguldak, Turkey, 387-400, (2001
  12. Altamiran G., Mejía I., Hernández-Expósito A., Cabrera J.M., “Effect of boron on the continuous cooling transformation kinetics in a low carbon advanced ultra-high strength steel (A-UHSS)”, Materials Research Society, 1485: 83–88, (2012
  13. Hernandez S., Hardell J., Winkelmann H., Ripoll M.R., Prakash B., “Influence of temperature on abrasive wear of boron steel and hot forming tool steels”, Wear, 338–339: 27–35, (2015
  14. Bialobrzeska B., Kostencki P., “Abrasive wear characteristics of selected low-alloy boron steels as measured in both field experiments and laboratory