Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 1

Development of Chitosan and Polycaprolactone Based Trilayer Biocomposite Films for Food Packaging Applications

Pages
263–273
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The fabrication of PCL and CH films in the trilayer form enhanced the properties of CH and made these films more appropriate for food packaging.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Chitosan (CH) films were obtained by casting method and sandwiched between 2 layers of polycaprolactone (PCL), which were formed by compression molding, to form trilayers.
📊
Key Findings & Data:CH films were also incorporated with grape seed extract (G) (15%, w/w) and/or nanocellulose (N) (1-5%, w/w).
💡
Conclusion & Impact:The fabrication of PCL and CH films in the trilayer form enhanced the properties of CH and made these films more appropriate for food packaging.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Chitosan · polycaprolactone · nanocellulose

Abstract

Chitosan (CH) films were obtained by casting method and sandwiched between 2 layers of polycaprolactone (PCL), which were formed by compression molding, to form trilayers. CH films were also incorporated with grape seed extract (G) (15%, w/w) and/or nanocellulose (N) (1-5%, w/w). The tensile properties, transmittance, opacity, water vapor permeability (WVP), antimicrobial activity, and release behavior of trilayers were determined. The elastic modulus (EM) of trilayer films were not significantly affected by the N content, while higher N concentrations resulted in higher tensile strength (TS) values. The incorporation of G led to higher elongation values and resulted in lower EM and TS values. Film samples, including N, presented lower WVP values, whereas higher WVP and water solubility values were obtained with G inclusion (p<0.05). L* and transmittance values increased with the increasing N content while the opacity values decreased (p<0.05). Furthermore, films added G showed significantly higher a* and b* values. The addition of N caused slower release of G from CH films through the selected food simulants. The obtained trilayer films also inhibited selected main pathogenic bacteria. The fabrication of PCL and CH films in the trilayer form enhanced the properties of CH and made these films more appropriate for food packaging.

Özet

Chitosan (CH) films were obtained by casting method and sandwiched between 2 layers of polycaprolactone (PCL), which were formed by compression molding, to form trilayers. CH films were also incorporated with grape seed extract (G) (15%, w/w) and/or nanocellulose (N) (1-5%, w/w). The tensile properties, transmittance, opacity, water vapor permeability (WVP), antimicrobial activity, and release behavior of trilayers were determined. The elastic modulus (EM) of trilayer films were not significantly affected by the N content, while higher N concentrations resulted in higher tensile strength (TS) values. The incorporation of G led to higher elongation values and resulted in lower EM and TS values. Film samples, including N, presented lower WVP values, whereas higher WVP and water solubility values were obtained with G inclusion (p<0.05). L* and transmittance values increased with the increasing N content while the opacity values decreased (p<0.05). Furthermore, films added G showed significantly higher a* and b* values. The addition of N caused slower release of G from CH films through the selected food simulants. The obtained trilayer films also inhibited selected main pathogenic bacteria. The fabrication of PCL and CH films in the trilayer form enhanced the properties of CH and made these films more appropriate for food packaging.

🔖

Cite This Article

SÖĞÜT, E., SEYDİM, A. C. (2021). Development of Chitosan and Polycaprolactone Based Trilayer Biocomposite Films for Food Packaging Applications. Politeknik Dergisi, Cilt: 24 - Sayı: 1, 263–273. https://ajindex.com/articles/306999

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Khan R. A., Salmieri S., Dussault D., Sharmin N., Lacroix M., M”echanical, Barrier, and Interfacial Properties of Biodegradable Composite Films Made of Methylcellulose and Poly(caprolactone)”, Journal of Applied Polymer Science, 123(3): 1690-1697, (2012)
  2. Bonilla J., Fortunati E., Atarés L., Chiralt A., Kenny J. M., “Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films”, Food Hydrocolloids, 35: 463–470, (2014)
  3. Chamanara V., Shabanpour B., Gorgin S., Khomeiri M., “An investigation on characteristics of rainbow trout coated using chitosan assisted with thyme essential oil”, International Journal of Biological Macromolecules, 50(3): 540–544, (2012)
  4. Rubilar J. F., Cruz R. M., Silva H. D., Vicente A. A., Khmelinskii I., Vieira M. C., Physico-mechanical properties of chitosan films with carvacrol and grape seed extract. Journal of Food Engineering, 115: 466–474, (2013)
  5. Hosseini M. H., Razavi S. H., Mousavi M. A., “Antimicrobial, physical and mechanical properties of chitosan-based films incorporated with thyme, clove and cinnamon essential oils”, Journal of Food Processing and Preservation, 33: 727–743, (2009)
  6. Rubentheren V., Ward T. A., Chee C. Y., Nair P., “Physical and chemical reinforcement of chitosan film using nanocrystalline cellulose and tannic acid”, Cellulose, 22: 2529–2541”, (2015)
  7. Ferreira A. S., Nunes C., Castro A., Ferreira P., Coimbra M. A., “Influence of grape pomace extract incorporation on chitosan films properties”, Carbohydrate Polymers, 113: 490–499, (2014)
  8. Moradi M., Tajik H., Razavi Rohani S. M., Oromiehie A. R., Malekinejad H., Aliakbarlu J., Hadian M., “Characterization of antioxidant chitosan film incorporated with Zataria multiflora Boiss essential oil and grape seed extract”, LWT—Food Science and Technology, 46: 477–484, (2012)
  9. Suppakul P., Miltz J., Sonneveld K., Bigger S. W., “Active Packaging Technologies with an Emphasis on Antimicrobial Packaging and its Applications”, Journal of Food Science, 68: 408-420, (2003)
  10. Boumail A., Salmieri S., Klimas E., Tawema P.O., Bouchard J., Lacroix M., “Characterization of Trilayer Antimicrobial Diffusion Films (ADFs) Based on Methylcellulose−Polycaprolactone Composites”, Journal of Agricultural and Food Chemistry, 61: 811−821, (2013)
  11. Azevedo V. M., Dias M. V., Borges S. V., Costa A. L. R., Silva E. K., Medeiros É. A. A., Soares N. de F. F., “Development of whey protein isolate bio-nanocomposit