Journals / Politeknik Dergisi / 2002 / Cilt: 4 - Sayı: 0

Effect of processing temperature and wire feeding rate on the properties of Ag nanopowders produced by inert gas condensation method

Ortam sıcaklığı ve tel besleme hızının asal gaz yoğuşturma metodu ile üretilen nanoboyutlu gümüş tozlarının özelliklerine etkisi

Pages
1–6
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that an increase in production temperature and wire feeding rate resulted in coarser particles with less spherical in shape.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Effect of production temperature and wire feeding rate on the size, shape, morphology and specific surface area of the particles were investigated during the production of Ag powders by Inert Gas Condensation method.
📊
Key Findings & Data:Silver nanopowders were produced in helium atmosphere at 1200-1800 $\circ_C$ temperatures with the wire feeding rates of 0.30-I.50 g/min.
💡
Conclusion & Impact:It was found that an increase in production temperature and wire feeding rate resulted in coarser particles with less spherical in shape.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Effect of production temperature and wire feeding rate on the size, shape, morphology and specific surface area of the particles were investigated during the production of Ag powders by Inert Gas Condensation method. Silver nanopowders were produced in helium atmosphere at 1200-1800 $\circ_C$ temperatures with the wire feeding rates of 0.30-I.50 g/min. Powder shape, size, morphology and the specific surface area of the particles were investigated. It was found that an increase in production temperature and wire feeding rate resulted in coarser particles with less spherical in shape. The ideal wire feeding rate and temperature for this study were found to be 1 g/min and 1500 $\circ_C$ respectively.

Özet

Asal gaz yoğuşturma metodu ile nanoboyutlu gümüş tozların üretimde, buharlaştırıcı sıcaklığı ve tel besleme hızının üretilen partiküllerin şekil, boyut, morfoloji ve özgül yüzey alanına etkileri araştırılmıştır. Gümüş tozları helyum gazı ortamında 20 mbar basınçta 1200-1800 $\circ_C$ sıcaklık aralığında ve 0.30-1.50 g/dak tel besleme hızında üretilmiştir. Partiküllerin, şekli, boyutu, morfolojisi, boyut dağılımları ve özgül yüzey alanı tespit edilmiştir. Üretilen tozlarda partikül boyutunun buharlaştırıcı sıcaklığı ve tel besleme hızı ile arttığı ve partikül boyu artışı ile partikül şeklinin küresellikten uzaklaştığı tespit edilmiştir. Bu çalışma için en uygun tel besleme hızı l g/dak, sıcaklık ise 1500 $\circ_C$ olarak bulunmuştur.

🔖

Cite This Article

TÜRKER, M. (2002). Effect of processing temperature and wire feeding rate on the properties of Ag nanopowders produced by inert gas condensation method. Politeknik Dergisi, Cilt: 4 - Sayı: 0, 1–6. https://ajindex.com/articles/306920

References (15)

  1. B.H.Kear, L.E.Cross, J.E.Keen, R.W.Siegel, F.Spaepen, K.C.Taylor, E.L.Thomas and K.K.Tu, Research opportunity for materials with ultrafine microstructures, Vol.NMAB- 454-National Academy, Washington, DC, (1989
  2. R.W.Siegel, Material Sci and Eng., B 19, 33- 43, (1993
  3. R.S.Averback and H.J.Höfler, Processing and properties of nanophase materials, Microcomposite and Nanophase Materials, The Mineral and Materials Society, Ed. by D.C.Van Aken et al, 27-39 (1991
  4. Türker M, Properties of Ag Nanopowders synthesised in inert gas/oxygen mixtures, Ağustos 2000, Rapor IFAM’a (Bremen-Almanya) ve Nato B2 projesi kapsamında TÜBİTAK’a sunuldu 5. M.Türker, Asal gaz yoğuşturma metodu ile nanoboyutlu Ag tozlarının üretime ve özelliklerinin değerlendirilmesi, Tübitak Doğa Dergisi, 2, 1-8 (2002
  5. H.Hahn, Gas phase synthesis of nanocrstalline materials, Nanostructured Maters, Vol.9, 3-12 (1997
  6. H.W Sarkas, L.H.Kidde, J.G.Eaton, K.M.Mchugh and K.H.Bowen, development of inert gas condensation beased iron source for the generation of strong beams of large cluster ions, Cluster and Cluster Assembled Materials, Materials Reseach Society Symposium Proceedings, Vol. 206, Ed by S. Avarback et al, 277-282, (1990)
  7. J.C.S.Lopez, E.P.Reddy, T.C.Rojas, M.J.Sayagues, A.Justo and A Fernandez, Preparation and characterisation of CdS and ZnS nanosized particles obtained by inert gas condensation evaporation method, NanoStructured Materials, Vol.12, 459-462, (1999
  8. G.M.Chow, The formation and growth of nanoscale particles by rapid condensation of a sputtered vapor, Nanophase and Nanocomposite Materials, Materials Research Society, Symposium Proceedings, Vol 286, 315-319, (1992
  9. Oda, I.Katsu, M.Tsuneizumi, E.Fachita, S.Kashu and C.Hayasi, Nanophase and Nanocomposite Materials, Materials Research Society, Symposium Proceedings, Vol 286, 121-130, (1992
  10. C.G.Grangvist and R.A.Buhrman, Journal of Applied Physics, Vol.47, No.5, 2200, (1976
  11. T.T.Koras, M.H Smith, Aerosol Processing of Materials, Wiley-VCH, (1999
  12. M.K.Aktar, G.G.Lipscomb and S.E.Pratsinis, Aerosol Science Technology, Vol.21, 83-93, (1994
  13. B.H.Gunther, Metal nanopowders for electrical conductive materials, The International Journal of Powders Metallurgy, Vol. 35, No.7, 53-58, (1999)
  14. H.G.Busmann, B.Gunther and U.Mayer, Polymer matrix composite filled with nanoporous metal powders: preparation and electrical properties, NanoStructured Materials, V12, 531-534, (1999
  15. Pickering F.B., The Bas