Journals / Politeknik Dergisi / 2002 / Cilt: 5 - Sayı: 3

The determination of heat losses from exhaust gases, cooling water and friction in a diesel engine

Bir dizel motorunda egzoz gazları, soğutma suyu ve sürtünmeler yoluyla kaybedilen ısı enerjisinin belirlenmesi

Pages
233–236
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Depending upon the engine speed the ratio of total heat energy to effective energy and lost energies (exhaust, cooling and friction) were investigated experimentally.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:While converting the heat energy into the mechanical energy, sorne losses take place in internal combustion engines.
📊
Key Findings & Data:These losses occur via exhaust, cooling, friction and radiation.
💡
Conclusion & Impact:Depending upon the engine speed the ratio of total heat energy to effective energy and lost energies (exhaust, cooling and friction) were investigated experimentally.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

While converting the heat energy into the mechanical energy, sorne losses take place in internal combustion engines. These losses occur via exhaust, cooling, friction and radiation. In this study a single cylinder direct injection diesel engine was used. Depending upon the engine speed the ratio of total heat energy to effective energy and lost energies (exhaust, cooling and friction) were investigated experimentally.

Özet

İçten yanmalı motorlarda, motora yakıt ile verilen ısı enerjisini mekanik enerjiye dönüştürürken, bir takım kayıplar meydana gelmektedir. Bu kayıplar; egzoz, soğutma, sürtünme ve radyasyon yoluyla olmaktadır. Bu çalışmada; tek silindirli direkt püskürtmeli bir dizel motorunda, motor devrine bağlı olarak silindir içerisine sürülen toplam ısı enerjisinin, efektif olarak alınan enerji ve kayıp enerjilere (egzoz, soğutma ve sürtünme) dönüşen miktarları deneysel olarak incelenmiştir.

🔖

Cite This Article

SALMAN, S., ÇINAR, C., TOPGÜL, T., HAŞİMOĞLU, C. (2002). The determination of heat losses from exhaust gases, cooling water and friction in a diesel engine. Politeknik Dergisi, Cilt: 5 - Sayı: 3, 233–236. https://ajindex.com/articles/306904

References (15)

  1. Borat, O., Balcı, M. ve Sürmen, A., İçten Yanmalı Motorlar, Teknik Eğitim Vakfı Yayınları, Cilt 1, 1995
  2. Çetinkaya, S., İçten Yanmalı Motorlar Laboratuarı Ders Notları
  3. Newton, K., Steeds, W. and Garrett, T. K., The Motor Vehicle, Butterworth Heinemann Press, England, 1997
  4. Zammit, S. J., Motor Vehicle Enginering Science for Technicans, Longman Scientific & Technical, 1987
  5. Beck, N. J., Uyehara, O. A., Emiritus, P. and Johnson, W. P., "Effects of Fuel Injection on Diesel Combustion", SAE Paper, No: 880299, 1988
  6. Yalçıntepe, M. R., Dizel Motorları Teknolojisi, 1977
  7. Taylor, C. F., The Internal Combustion Engine In Theory and Practise, The MIT Press, Volume 1,1986
  8. Yoshimoto, Y., Tsukahara, M. and Kuramoto, T., "Improvement of BSFC by Reducing Diesel Engine Cooling Losses with Emulsified Fuel", SAE Paper, No: 962022, 1996
  9. Ball, W. F., Jackson, N. S., Pilley, A. D. And Porter, B. C, "The Friction of a 1.6 Liter Automotive Engine-Gasoline and Diesel", SAE Paper, No: 860418, 1986
  10. Heywood, J. B., Internal Combustion Engine Fundementals, Mc Graw-Hill Book Company, 1988
  11. Brown, W. L., "The Caterpillar IMEP Meter and Engine Friction", SAE Paper, No: 730150, 1973
  12. Wakuri, Y., Soejima, M., Ejima, Y., Hamatake, T. and Kitahara, T., "Studies on Friction Characteristics of Reciprocating Engines", SAE Paper, No: 952471, 1995
  13. Pulkrabek, W. W., Engineering Fundamentals of the Internal Combustion Engine, Prentice Hall Inc. New Jersey, 1997
  14. Hararl, R. and Sher, E., 1997, Engineering Fundamentals of the Internal Combustion Engine, Prentice Hall Inc
  15. G. Cussons Ltd., Cussons Exhaust Gas Calorimeters Instruction Manuel, 1998.