SavedAdd your journal

Journals / Politeknik Dergisi / 2004 / Cilt: 7 - Sayı: 1

Effects of machining parameters on the surface texture of an aluminium alloy in WEDM process

Tel erozyon yönteminde işleme parametrelerinin alüminyum alaşımının yüzey yapısına etkisi

ULAŞ ÇAYDAŞ
Ahmet HASÇALIK
Pages
31–36
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that the surface properties were depended on process parameters and from this view it was attained to conclusion that suitable parameters must be selected according to expecting properties from material.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the microstructure variation and the surface roughness in aluminium alloy according to puls on time, voltage, dielectric fluid circulation pressure and wire feed rate parameters were investigated in the WEDM.
📊
Key Findings & Data:After cutting operations, the microstructure of specimens were examined by optic and SEM microscopy.
💡
Conclusion & Impact:It was concluded that the surface properties were depended on process parameters and from this view it was attained to conclusion that suitable parameters must be selected according to expecting properties from material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the microstructure variation and the surface roughness in aluminium alloy according to puls on time, voltage, dielectric fluid circulation pressure and wire feed rate parameters were investigated in the WEDM. After cutting operations, the microstructure of specimens were examined by optic and SEM microscopy. The tnicrohardness and surface roughness were measured. It was concluded that the surface properties were depended on process parameters and from this view it was attained to conclusion that suitable parameters must be selected according to expecting properties from material.

Özet

Bu çalışmada, tel erozyon yönteminde dielektrik sıvı sirkülasyon basıncı, puls süresi, gerilim ve tel ilerleme hızı parametrelerine bağlı olarak alüminyum alaşımının yüzey pürüzlülüğü ve mikroyapı değişimi incelenmiştir. Kesme işlemlerinden sonra, numunelerin mikroyapılan SEM ve optik mikroskopta incelenmiştir. Mikrosertlik ve yüzey pürüzlülük ölçümleri gerçekleştirilmiştir. Sonuç olarak, numunelerin yüzey özellikleri işlem parametrelerine göre değişmekte ve malzemeden beklenen özelliklere göre uygun parametre seçilmesi gerekmektedir.

🔖

Cite This Article

ÇAYDAŞ, U., HASÇALIK, A. (2004). Effects of machining parameters on the surface texture of an aluminium alloy in WEDM process. Politeknik Dergisi, Cilt: 7 - Sayı: 1, 31–36. https://ajindex.com/articles/306878

References (1)

  1. Takeuchi, L., Jianxin, D., Mechanical Surface Treatments of the EDMed Ceramic Composite for Improved Strength and Reliability, Journal of the European Ceramic Society 22 (2002)545-550 2. Speedding, T. A., Wang, Z. O., Parametric Optimization and Surface Characterization of Wire Electrical Discharge Machining Process, Precision Engineering 20: (1997), 5-15 3. Novwicki, B., Pierzynowski, R., Spadlo, S., New Possibilities of Machining Electrodischarge Alloying of Free-form Surface, Journal of Materials Processing Technology 109 (2001) 371-376 4. Liao, Y.S. and Woo, J.C., The effects of machining settings on the behavior of pulse trains in the WEDM process, Journal of Materials Processing Technology, 71, 433 - 439, 1996 5. Spedding T.A., Wang Z.Q., Parametric Optimization and Surface Characterization of Wire Electrical Discharge Machining Process. Precision Engineering 20:5-15, 1997 6. Liao, Y.S., Woo, J. C, The Effect of Machining Settings on the behaviour of Pulse Trains in the WEDM Process, Journal of Materials Processing Technology 71, 433- 439, 1997 7. Liao, Y.S., Huang, J.T. and Su, H.C., A study on the machining parameters optimization of wire electrical discharge machining, Journal of Materials Processing Technology, 71, 487-493, 1996 8. Simao, J., Lee, H. G., Aspinwall, R. C, Dewes, R. C., Aspinwall, E. M., Workpiece surface Modification Using Electrical Discharge Machining, International Journal of Machine Tools and Manufacture 43 (2003)121-128 9. Chou, K. Y., Evans, C. J., White Layers and Thermal Modeling of Hard Turned Surfaces, International Journal of Machine Tools and Manufacture 39 (1999) 1863-1881 10. Guo, Z.N., Lee, T.C., Yue, T.M., and Lau, W.S., Study on the machining mechanism of WEDM with ultrasonic vibration of the wire, Journal of Materials Processing Technology, 69,(1997)212- 221. 11. Gökler, İ., Ozanözgü, M., Experimental investigation of effects cutting parameters on surface roughness in the WEDM process, International Journal of Machine Tools and Manufacture 40 (2000)1831-1848 12. Nowicki, B., Pierzynowski, R. and Spadlo, S., New possibilities of machining and electrodiseharge alloying of free-form surfaces, Journal of Materials Processing Technology, 109,371- 376,2001 13. Prohaszka, J.,Mamalias, A.G., and Vaxevanidis, N.M., The effects of electrode material on machinability in wire electro discharge machining, Journal of Materials Processing Technology, 69,233-237, 1996 14. Tosun, N., and Coğun, C., An investigation on Wire Wea