Journals / Politeknik Dergisi / 2002 / Cilt: 5 - Sayı: 1

Evaluation of DXF data files to reconstruct 3D models from orthographic views

Ortografik görünüşlerden 3B'lu modeller elde etmek için DXF dosyalarının yorumlanması

Pages
95–103
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Prismatic final solid models are obtained by combining of primary primitives.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a program for automatically reconstruction of 3D solid models from 2D drawings has been developed.
📊
Key Findings & Data:DXF format (Data Interchange Format) was used to reconstruct 3D models from 2D orthographic views generated by the user in AutoCAD.
💡
Conclusion & Impact:Prismatic final solid models are obtained by combining of primary primitives.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, a program for automatically reconstruction of 3D solid models from 2D drawings has been developed. VisualLISP was used as a programming langauage. DXF format (Data Interchange Format) was used to reconstruct 3D models from 2D orthographic views generated by the user in AutoCAD. Computer program saves the orthographic views of 2D prismatic parts in DXF format. Having been evaluated the geometric information in DXF format by the program primary and secondary primitives of prismatic solids are obtained by rotational and linear sweeping operations. Then, secondary primitives are subtracted from primary primitives by Boolean operations. Prismatic final solid models are obtained by combining of primary primitives.

Özet

Bu çalışmada, 2B'lu çizimlerden otomatik olarak 3B'lu katı modellerin elde edilmesi için bir program geliştirilmiştir. Programlama dili olarak VisualLISP programlama dili kullanılmıştır. Kullanıcı tarafından AutoCAD ortamında oluşturulan 2B'lu çizimlerden 3B'lu katı modeller elde etmek için DXF (Data Interchange Format) veri dönüşüm formatı kullanılmıştır. Bilgisayar programı 2B'lu prizmatik parçaların görünüşlerini DXF formatında kaydetmektedir. DXF formatında bulunan çizime ait geometrik bilgiler program tarafından yorumlanarak prizmatik katının birincil ve ikincil ilkelleri dönel ve lineer süpürme operasyonları ile elde edilmektedir. Daha sonra ikincil ilkeller birincil ilkellerden Boolean operasyonları yardımıyla çıkarılmakta ve birincil ilkeller bir araya getirilerek prizmatik çözüm nesnesi elde edilmektedir.

🔖

Cite This Article

ÇİÇEK, A., GÜLESİN, M. (2002). Evaluation of DXF data files to reconstruct 3D models from orthographic views. Politeknik Dergisi, Cilt: 5 - Sayı: 1, 95–103. https://ajindex.com/articles/306848

References (2)

  1. Gülesin, M., 1997, MCAD-2 1/2 boyutlu bilgisayar destekli tasarım programı, İ.T.Ü. Makina Fakültesi 1. Makina Mühendisliği Kongresi, Sayfa 275-283, İstanbul 2. Tekiner, Z., 1995, Bağlama Kalıplarında Bilgisayar "Destekli Kuvvet Analizi ve Kalıplama Elemanlarının Seçimi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara. 3. Nalbant, M., 1997, Bilgisayarla Bütünleşik Tasarım ve İmalat, Beta Basım Yayım Dağıtım A.Ş., İstanbul. 4. Idesawa, M., "A System To Generate A Solid Figure From Three View", Bulletin of JSME, Vol. 16, pp. 216-225, (1973). 5. Woo, T. C., Hammer, J. M., 1977, Reconstruction of three dimensional designs from orthographic projections, Proc. Ninth CİRP Conference, pp. 247-255. 6. Markowsky, G., Wesley, M. A., 1981,
  2. Fleshing out projections, IBM Journal Research and Development, Vol. 25, pp. 934- 954. 7. Gujar, U. G., Nagendra, I. V., 1989, Construction of 3D solid objects from orthographic views, Computer and Graphics, Vol. 13, No. 4, pp. 505-521. 8. Yan, Q. W., Chen, C. L. P., Tang, Z.,1994, Efficient algorithm for the reconstruction of 3D objects from orthographic projections, Computer Aided Design, Vol. 26, No. 9, pp. 699-717. 9. Aldefeld, B., 1983, On automatic recognition of 3D structures from 2D representations, Computer Aided Design, Vol. 15, No. 2, pp. 59-72. 10. Bin, H., 1986, Inputting constructive solid geometry representations directly from 2D orthographic engineering drawings, Computer Aided Design, Vol. 18, No. 3, pp.147-155. 11. Chen, Z., Perng, D. B., 1988, Automatic reconstruction of 3D solid objects from 2D orthographic views, pattern recognition, Pattern Recognition Society, Vol. 21, No. 5, pp. 439-449. 12. Shum, S. S. P., Lau, W. S., Yuen, M.M.F., Yu, K.M., 1997, Solid reconstruction from orthographic opaque views using incremental extrusion, Comput and Graphics, Vol. 21, No. 6, pp. 787-800.