Journals / Politeknik Dergisi / 2007 / Cilt: 10 - Sayı: 2

The Experimental Investigation of Different Profile Absorber Plates in Flat Solar Collectors

Düzlemsel Güneş Kollektörlerinde Farklı Profillerdeki Emici Plakaların Deneysel İncelenmesi

Pages
173–177
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results have also showed that the performance of the zigzag duct in which joining of the duct is in the middle of the zigzag duct is higher than the performances of others

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the performance value have been calculated for different profile absorber plates used in flat solar collector.
📊
Key Findings & Data:The systems have been compared with the thermal performances according to their efficiency values and solar radiations.
💡
Conclusion & Impact:The results have also showed that the performance of the zigzag duct in which joining of the duct is in the middle of the zigzag duct is higher than the performances of others
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Güneş enerjisi · direkt sistem · emici plaka

Abstract

In this study, the performance value have been calculated for different profile absorber plates used in flat solar collector. The systems have been compared with the thermal performances according to their efficiency values and solar radiations. Results have showed that the average collector performances calculated as 32,9 % for flat plate, 36,3 % for zigzag duct in which joining of the duct is in the middle of the zigzag duct and 32,1 % for the zigzag duct in which joining of the duct is on the zigzag duct, and 26,7 % for parabolic duct. The results have also showed that the performance of the zigzag duct in which joining of the duct is in the middle of the zigzag duct is higher than the performances of others

Özet

Bu çalışmada, düzlemsel güneş kolektörlerinde kullanılan farklı profillerdeki emici plakalar için verim değerleri deneysel olarak hesaplanmıştır. Verim değerleri ve güneş ışınımına göre, sistemler ısıl verim bakımından karşılaştırılmıştır. Yapılan karşılaştırma sonucunda, düz yüzeyli kollektörün ortalama verimi %32,9, zikzak kanallı kolektörlerden; boru birleşimi üstteki emici plakanın ortalama verimi %32,1, boru birleşimi ortadaki emici plakanın ortalama verimi %36,3, parabolik kanallı kollektörün ortalama verimi %26,7, olarak hesaplanmıştır. Bu hesaplamalar sonucunda zikzak kanallı kolektörlerden boru birleşimi ortadaki sistemin ortalama veriminin diğer sistemlerin ortalama verim değerlerinden yüksek olduğu görülmüştür.

🔖

Cite This Article

ÖZKAYA, M. G., VARİYENLİ, H. İ., KORKMAZ, M. (2007). The Experimental Investigation of Different Profile Absorber Plates in Flat Solar Collectors. Politeknik Dergisi, Cilt: 10 - Sayı: 2, 173–177. https://ajindex.com/articles/306818

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...