Journals / Politeknik Dergisi / 2007 / Cilt: 10 - Sayı: 2

Reactive Power Compansation By PWM-Statcom

DGM-Statcom ile Reaktif Güç Kompanzasyonu

Pages
123–128
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

From the results of the simulation, it has been observed that response of the PWM-STATCOM to instant variations is very fast and reactive power for power system is provided in short time

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, FACTS (Flexible Alternating Current Transmission Systems) devices are used for reactive power compensation in power systems, transmission and distribution systems, since their response is faster than that of the conventional compensators.
📊
Key Findings & Data:One of the most widely used FACTS device is STATCOM.
💡
Conclusion & Impact:From the results of the simulation, it has been observed that response of the PWM-STATCOM to instant variations is very fast and reactive power for power system is provided in short time
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kompanzasyon · DGM-STATCOM · : Compensation

Abstract

In recent years, FACTS (Flexible Alternating Current Transmission Systems) devices are used for reactive power compensation in power systems, transmission and distribution systems, since their response is faster than that of the conventional compensators. One of the most widely used FACTS device is STATCOM. In this study, simulation of the STATCOM (Static Synchronous Compensator) has been realized by using Pulse Width Modulation (PWM). Matlab-Simulink software is used for simulation. In the simulation, dynamic response of PWM-STATCOM has been observed for various bus voltages. From the results of the simulation, it has been observed that response of the PWM-STATCOM to instant variations is very fast and reactive power for power system is provided in short time

Özet

Son yıllarda, iletim ve dağıtım sistemlerinin reaktif güç kompanzasyonunda geleneksel kompanzatörlere göre daha iyi cevap hızlarına sahip olmalarından dolayı, dönüştürücü tabanlı FACTS (Esnek Alternatif Akım İletim Hatları) aygıtları kullanılmaktadırlar. STATCOM, yaygın olarak kullanılan FACTS aygıtlarından biridir. Bu çalışmada, Darbe Genişlik Modülasyonu (DGM) tekniği kullanan STATCOM ’un (Statik Senkron Kompanzatör) MATLAB ile benzetimi yapılmıştır. Bu benzetimde, bara geriliminin genliği değiştirilerek DGM-STATCOM ’un dinamik cevabı gözlemlenmiştir. Benzetim programı sonuçlarından, DGM-STATCOM ’un bu ani değişikliklere cevabının çok hızlı olduğu ve güç sistemi için gerekli reaktif gücü kısa sürede sağladığı görülmüştür.

🔖

Cite This Article

ÇÖTELİ, R., AYDOĞMUŞ, Z. (2007). Reactive Power Compansation By PWM-Statcom. Politeknik Dergisi, Cilt: 10 - Sayı: 2, 123–128. https://ajindex.com/articles/306801

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...