Journals / Politeknik Dergisi / 2007 / Cilt: 10 - Sayı: 3

Tensile shear strengths of some local woods bonded with poliyvinly acetate and polyurethane adhesives

Polivinilasetat(PVAc) ve poliüretan(PU) tutkalları ile yapıştırılmış bazı ağaçlarda çekmede makaslama dirençleri

Pages
287–293
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, the tensile shear strength was found high on the high density wood material The highest value of tensile shear strength were observed on acacia wood bonded vith PVAc–D4 (14,418 N/mm2) and the lowest value were determined on cedar wood bonded with PVAc–D3 (6,249 N/mm2) adhesive respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study aims to determine the tensile shear strength of the local wood specimens from acacia (Robinia pseudoacacia L.), pear (Pirus communis L.), chestnut (Castanea sativa Mill.), oak (Quercus petrean Lieble) and cedar (Cedrus libani A.
📊
Key Findings & Data:Rich) which were glued with one component PVAc–D3, with two components PVAc–D4 with the modification of 5 % hardener and polyurethane adhesives.
💡
Conclusion & Impact:According to the results, the tensile shear strength was found high on the high density wood material The highest value of tensile shear strength were observed on acacia wood bonded vith PVAc–D4 (14,418 N/mm2) and the lowest value were determined on cedar wood bonded with PVAc–D3 (6,249 N/mm2) adhesive respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study aims to determine the tensile shear strength of the local wood specimens from acacia (Robinia pseudoacacia L.), pear (Pirus communis L.), chestnut (Castanea sativa Mill.), oak (Quercus petrean Lieble) and cedar (Cedrus libani A. Rich) which were glued with one component PVAc–D3, with two components PVAc–D4 with the modification of 5 % hardener and polyurethane adhesives. Tensile shear strength of the adhesives was carried in accordance with the standards of BS EN 204–BS EN 205 respectively. According to the results, the tensile shear strength was found high on the high density wood material The highest value of tensile shear strength were observed on acacia wood bonded vith PVAc–D4 (14,418 N/mm2) and the lowest value were determined on cedar wood bonded with PVAc–D3 (6,249 N/mm2) adhesive respectively.

Özet

Bu çalışmada tek bileşenli polivinilasetat (PVAc–D3), % 5 sertleştirici ilavesiyle güçlendirilmiş çift bileşenli polivinilasetat (PVAc–D4) ve poliüretan tutkallar ile yapıştırılmış akasya (Robinia pseudoacacia L.), armut (Pirus communis L.), kestane (Castanea sativa Mill.), sapsız meşe (Quercus petrean Lieble) ve Toros sediri (Cedrus libani A. Rich) yerli ağaç odunlarından hazırlanan örneklerde çekmede makaslama direncinin belirlenmesi amaçlanmıştır. Çekmede makaslama direnci, BS EN 204 ve BS EN 205 esaslarına uyularak belirlenmiştir. Araştırma sonuçlarına göre, çekmede makaslama direncinin, yoğunluğu yüksek olan ağaç malzemelerde yüksek olduğu tespit edilmiştir. En yüksek çekmede makaslama direncini PVAc–D4 tutkalı ile akasya (14,418 N/mm2), en düşük çekmede makaslama direncini ise PVAc–D3 tutkalı ile Toros sediri (6,249 N/mm2) vermiştir.

🔖

Cite This Article

SÖĞÜTLÜ, C., DÖNGEL, N. (2007). Tensile shear strengths of some local woods bonded with poliyvinly acetate and polyurethane adhesives. Politeknik Dergisi, Cilt: 10 - Sayı: 3, 287–293. https://ajindex.com/articles/306769

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Söğütlü, C., “Bazı Yerli Ağaç Türlerinin Kündekâri Yapımında Kullanım İmkânları”, Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2-3, (2004)
  2. Fatery, K. F., Williamson, T. G., “Adhesives”, Wood Engineering and Condruction, Fatery, K. F., Williamson, McCRAW–HILL, INC., New York, 1–39 (1997)
  3. Örs, Y., Keskin, H., “Ağaç Malzeme Bilgisi”, T.C. Sanayi ve Ticaret Bakanlığı (KOSGEB), Ankara, 61–65 (2001)
  4. Ay, N., Örs, Y., “Duglas Göknarı Odunu Yoğunluğuna, Orijin ve Bölge Farklılığının Etkisi”, Turkish Journal of Agriculture and Forestry, 23 (Ek Sayı 2): 383–387 (1999)
  5. Berkel, A., “Ağaç Malzeme Teknolojisi”, İstanbul Üniversitesi Orman Fakültesi, İstanbul, 593–596 (1970)
  6. Örs, Y., “Kama Dişli Birleşmeli Masif Ağaç Malzemede Mekanik Özellikler”, Karadeniz Üniversitesi Orman Fakültesi, Üniversite Yayın No 112, Fakülte Yayın No 11, Trabzon, 93–98 (1987)
  7. Altınok, M., Söğütlü, C., Döngel, N., “Üre formaldehit (UF) ile Modifiye Edilmiş ST–10 Tutkalının Yapışma Direncinin Belirlenmesi”, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Teknoloji Dergisi, 2 (3–4): 193–201 (1999)
  8. Özçifçi, A., Özen, R., Altınok, M., “Determination of Strength Joint of Polimarin Adhesive for Wooden Materials in Boiling, Cold and Hot Water Conditions”, 11th World Forestry Congress, 57 Antalya, TÜRKİYE (13–22 October, 1997)
  9. Örs, Y., Atar, M., Özçiftçi, A., “Farklı Ağaç Türleri ile Yonga ve Lif Levhalarda PVAc veya Desmodur–VTKA Tutkalı Kullanarak Uygulanan Kavelalarda Çekme Mukavemeti”, Turkish Journal of Agriculture and Forestry, 23 (Ek Sayı 1): 151–156 (1999)
  10. Örs, Y., Özçiftçi, A., Atar, M., “Klebit 303, Kleiberit 305.0 ve Süper–Lackleim 308 Tutkallarının Yapışma Dirençleri”, Turkish Journal of Agriculture and Forestry, 23 (Ek Sayı 3): 757–761 (1999)
  11. Altınok, M., Döngel, N., Söğütlü, C., “Modifiye Edilmiş Polivinilasetat Dispersiyonu (VB–20) Tutkalının Yapışma Direncinin Belirlenmesi”, G.Ü., Fen Bilimleri Enstitüsü Dergisi, 13 (13): 447–456 (2000)
  12. Altınok, M., Döngel, N., Söğütlü, C., “Zıvanalı (T) Birleştirmelerde Ağaç Türü, Tutkal Çeşidi ve Presleme Yönünün Çekme Direncine Etkileri”, Turkish Journal of Agriculture and Forestry, 24 (6): 767–771 (2000)
  13. Efe, H., Demirci, S., “Çerçeve Konstrüksiyonlu Mobilya Kavelalı Birleştirmelerde Ağaç türü, Tutkal Çeşidi ve Kesit Şeklinin Çekme Direncine Etkileri”, G.Ü. Teknik Eğitim Fakültesi Politeknik Dergisi, 3(4): 45–51(2000)
  14. Keskin, H., “Lamine Masif Ağaç Malzemelerin Teknolojik Özellikl